App Icon



A simple widget to control your Home Assistant entities and scenes.</p><p>Simply add your scenes, login and easily trigger them from the widget.</p><p></p><p>A full description and setup instruction is available at this link:</p><p></p><p></p><p>This widget requires a paired phone and Home Assistant instance available over HTTPS. (HTTPS is a requirement by Garmin)</p>


Version 1.5.2:</p><p>- Fixes bug, displays additional menu on vivoactive 4</p><p></p><p>Version 1.5.1:</p><p>- Adds the ability to use custom port after Garmin changing the validation behaviour in their app.</p><p></p><p>Version 1.5.0:</p><p>- Adds support for covers</p><p>- Adds support for Venu2 and Venu2s</p><p>- Changes default start screen</p><p></p><p>Version 1.4.1:</p><p>- Fixes app crash when there was no entities configured</p>

Ytterligare information


Den här appen måste ha åtkomst till:

  • Skicka/ta emot information till/från internet
  • D2™ Delta S D2™ Delta S
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 745 Forerunner® 745
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Dual Power fēnix® 6 Dual Power
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6 Pro Dual Power fēnix® 6 Pro Dual Power
  • fēnix® 6 Pro Solar fēnix® 6 Pro Solar
  • fēnix® 6 Solar fēnix® 6 Solar
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Dual Power fēnix® 6S Dual Power
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6S Pro Dual Power fēnix® 6S Pro Dual Power
  • fēnix® 6S Pro Solar fēnix® 6S Pro Solar
  • fēnix® 6S Solar fēnix® 6S Solar
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballistics
  • Mercedes-Benz Venu® Mercedes-Benz Venu®
  • quatix® 6 quatix® 6
  • quatix® 6X quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
  • Venu® Venu®
  • Venu® 2 Venu® 2
  • Venu® 2S Venu® 2S
  • Venu® Sq. Venu® Sq.
  • Venu® Sq. Music Venu® Sq. Music
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
Medelbetyg: (26 betyg)

Richard Anderson
den 17 januari 2022 | Version 1.5.2

Works well once I figured out a few things. I was not able to get long term tokens to work. Restarting the phone was most effective at restarting the app. Restarting the app was helpful in switching from token to non-token. I think it remembers the last session with hassio and that causes 404 not found problems. I am still working on getting my scenes and and groups.yaml setup properly.

Ondřej Bartoš
den 21 november 2021 | Version 1.5.1

Great support from the developer on my previous post, unfortunately Garmin does not allow to change Ratting, so creating new one. I would really appreciate to have option to show temperature sensors as well.

Rasmus Johansen
den 20 november 2021 | Version 1.5.1

Nice app for doing simple controls through HA :) And great support from the developer, who fixed a reported bug within a few days.

Ondřej Bartoš
den 20 november 2021 | Version 1.5.0

cannot add port 8123 after url, is this needed? it says red labeled message "invalid value" when port is included in url

Svar från utvecklaren
den 20 november 2021, karlenek

Please see the already opened issue on GitHub and the review just before your own. This issue should be fixed in version 1.5.1.

den 14 november 2021 | Version 1.5.0

After some update I'm not able to put port number to server address. Without it it does not work at all.

Svar från utvecklaren
den 15 november 2021, karlenek

Hi, that doesn't sound very good. I can't think of anything I have changed that would change that behaviour, could you please describe the issue a little further, like error codes etc. Then I might be able to fix it. Feel free to open an issue on GitHub, it would be easier to keep the discussion there.

Daniel Grob
den 30 juli 2021 | Version 1.4.1

Awesome widget, any chance it will support cover entities in the future? Controling it through an input boolean at the moment which works fine.

Svar från utvecklaren
den 11 augusti 2021, karlenek

Thanks :) I have just uploaded a new version supporting covers. Only basic operation, like opening and closing. Let me know if it doesn't work as it should! I have no real cover to test on.

den 21 april 2021 | Version 1.3.0

Works great, looks way better than "the other one app" and to make it even better I updated the source code to support more homeassistant entities.

Joakim Tdal
den 7 april 2021 | Version 1.3.0

Works very good! Great functions and simple setup! Recommended!

den 15 mars 2021 | Version 1.3.0

Fantastic widget!!! Thank you very much, it works perfectly!

Aina Småvik
den 25 februari 2021 | Version 1.3.0

Does not work, I get error message "Failed. Check settings, invalid url", even though the url is correct. I tried both internal ip address and external web address from ddns.

Svar från utvecklaren
den 26 februari 2021, karlenek

Internal/private IP addresses won’t work, since neither HTTP is not supported or self signed certificates. This is a limitation from Garmin and nothing I can fix. If you contact me through ConnectIQ instead of writing a review it will be easier for me to help you. And please attach the url you are using. Or if you open an issue on GitHub. But with the little information I have it sounds that you are using http and not https. Like mentioned above http is not supported due to limitations from Garmin. This is clearly stated in the documentation.

den 9 februari 2021 | Version 1.2.1

very nice idea. this could be a perfect HA enhancement. Unfortunately I have problems to read entities from group. Might be a problem with https and self signed certificates. I'm not sure how IQ handles imported CA on Android. BTW Login works with Token only. Same Problem?

Svar från utvecklaren
den 9 februari 2021, karlenek

It would be nice if you could open an issue about this on GitHub, and I will try to help you. However, it sounds like the self-signed certificate could be the issue. I know it won’t be supported on iPhone using the Garmin app in the latest versions of iOS.

André Zunido
den 22 januari 2021 | Version 1.2.1

Great effort, unfortunately its too much of an hassle to setup https in my local home assistant installation just to be able to turn off my slightly out-of-reach bedside lamp from my watch.

Svar från utvecklaren
den 25 januari 2021, karlenek

Thanks! I'm sorry to hear that, but Garmin doesn't let us use HTTP :/

Tomáš Kupka
den 18 januari 2021 | Version 1.2.0

App is working perfectly. No need to login since long lived token is used. Thanks for quick reaction on the issues and fixing them!

den 8 december 2020 | Version 1.1.1

Finally, the widget keep disconnecting. Can't be used since I have to connect with my phone each time.

Svar från utvecklaren
den 16 december 2020, karlenek

Hi! Unfortunately, I don't have full control over the connection. The widget doesn't handle any connection to the phone, this should be done automatically by the watch. Things I can think of without having too much detail; - Make sure the Garmin Connect app is running in the bacckground. - Make sure you have enabled background refresh on the app. It would be helpful if you could open an Github issue and describe you problem, including what watch and phone you are using. And I will try to support you! /Karl

den 28 november 2020 | Version 1.1.0

Thank you! Great work! Took a little time to catch how to show entities on the watch, but after that everything is as described. Just a question : is there plan to add some functions? Examples : turn on only instead of toggle. If example I turn on a switch to unlock my door which then turn off automatically, I have to turn off on the watch manually before unlocking the door again. Also, I'm not a developer, but is there a way to add NFC to scan a tag associated with actions (of course the phone associated to the watch should be near). Thank you again!

Svar från utvecklaren
den 28 november 2020, karlenek

Hi, thanks! Could you open an issue on Github where you describe your setup in Home Assistant? How are you using the switch to open the lock? Maybe I can just add support for locks if that would help? Lets continue the discussion on Github :) Regarding NFC, as far as I know there is no way for non Garmin developers to access the NFC API. So that wont work with Garmin watches unfortunately.