App Icon

Power Zones Chart

Beskrivning

== Support app development? ==</p><p></p><p>Do you like the datafield?</p><p>Feel free to make a donation on PayPal. Thanks to everyone supporting development.</p><p>https://paypal.me/winklerronny</p><p></p><p>== Overview ==</p><p></p><p>This datafield provides a graph showing the percentage of time spent in the defined power zones. The bars are growing depending on the time you spend in the zone during the activity.</p>

Nyheter

If you get problems after update (iq-Logo instead of datafield), please uninstall ans install the datafield again. That fixes most problems of changd app settings.</p><p>version 1.2.3</p><p>- new devices (Edge 1040, FR255 ...)</p><p>version 1.2.2</p><p>- new devices (fenix 7, epix 2)</p><p>version 1.2.1</p><p>- New option for minimal PWR value. If you have deactivated the option "count only inside zones", you can set a min. PWR value for counting values below zone 1. All values between this min. value and zone 1 will be added to zone 1. So you can prevent counting time your are not cycling.</p>

Ytterligare information

Behörigheter

Den här appen måste ha åtkomst till:

  • Din Garmin Connect™-träningsprofil
  • D2™ Air D2™ Air
  • D2™ Air X10 D2™ Air X10
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • D2™ Mach 1 D2™ Mach 1
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 1040 Edge® 1040
  • Edge® 130 Edge® 130
  • Edge® 130 Plus Edge® 130 Plus
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • Enduro™ 2 Enduro™ 2
  • epix™ epix™
  • epix™ (Gen 2) epix™ (Gen 2), quatix® 7 – Sapphire Edition
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 745 Forerunner® 745
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • Forerunner® 945 LTE Forerunner® 945 LTE
  • Forerunner® 955 Forerunner® 955, Forerunner® 955 Solar
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Dual Power fēnix® 6 Dual Power
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6 Pro Dual Power fēnix® 6 Pro Dual Power
  • fēnix® 6 Pro Solar fēnix® 6 Pro Solar
  • fēnix® 6 Solar fēnix® 6 Solar
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Dual Power fēnix® 6S Dual Power
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6S Pro Dual Power fēnix® 6S Pro Dual Power
  • fēnix® 6S Pro Solar fēnix® 6S Pro Solar
  • fēnix® 6S Solar fēnix® 6S Solar
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballistics
  • fēnix® 7 fēnix® 7, quatix® 7
  • fēnix® 7S fēnix® 7S
  • fēnix® 7X fēnix® 7X, quatix® 7X – Solar Edition
  • fēnix® Chronos fēnix® Chronos
  • quatix® 6 quatix® 6
  • quatix® 6X quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
  • tactix® 7 tactix® 7, tactix® 7 – Pro Ballistics Edition, tactix® 7 – Pro Edition
Medelbetyg: (23 betyg)

ManuS5
den 9 augusti 2022 | Version 1.2.3

The heart data field is perfect, but the power one is terrible. Before zone 1 and after zone 7 there are 2 big zones that use almost half of the total bar so each zone become very small!! I can’t use it like this!

Svar från utvecklaren
den 9 augusti 2022, ronnywinkler

It depends on your zone settings. Just go to app settings and set lower and upper bound of your zones to a value that looks good on the screen. If you want to add your time outside these zones (lower than 1 and higher that 7), deactivate the option "count only inside zones". In addition you can set at lowest value to prevent counting time below this value (traffic light stops...). For further questions please use the "contact developer" form.

Mindas, O Bardina
den 16 februari 2022 | Version 1.2.2

Works great! Actually, both the Power and HR zones fields from the same developer are a must-have for me. Thank you very much for your work!

Alberto
den 19 januari 2022 | Version 1.2.1

Is it possible to have the data written to the. fit file, so that we can read in Garmin connect after the session? That would be great. Thanks. A very good app.

Svar från utvecklaren
den 19 januari 2022, ronnywinkler

No, that's not possible. The data is written by the activity (in most cases default Garmin activities like cycling). The datafield only displays the current activity data and is calculating temporary some values tu show the chart. A datafield has no write access to the fit data.

Kane
den 14 januari 2022 | Version 1.2.1

Very nice data. Would be nice if there was an option to hide the ‘time spent in zone’ bars that stack on the zone. Also option to color them based on zone maybe

Igor Matheus
den 6 december 2021 | Version 1.2.1

Great. What value should I put in the power zone 1 if my zone 1 goes to 175w? I don't know if I should insert 0 or 175.

Svar från utvecklaren
den 7 december 2021, ronnywinkler

Hi Igor, You can set it to a value which makes the chart looking good on the screen, for example the same size like 2nd zone. In addition you can unset the option "count only inside zones". This way, all power values lower than your low border of zone 1 are added to this zone. In addition, use the option "min. PWR-value“ to ignore power values below this value. So you can stop counting if your are waiting at a traffic light.

Luca Invernici
den 1 november 2021 | Version 1.2.1

Very good app, but I would need the 30s average power value and also the 60s average power value too in the settings options. I would like this choose because when I don't wear the heart rate band, I like thinking my power like my heart rate. So if the the average value is too short (for example 10s), the power value changes too fast and this is not like how the heart does. I hope you can understand.. Thank you very much if you do it.

Dennis Geis
den 24 augusti 2020 | Version 1.2.1

Danke für die beiden (Power, Puls) klasse Datenfelder. Sie sind auf meinem 1030 nicht mehr wegzudenken! Ich hätte einen kleinen Verbesserungsvorschlag/Wunsch: Ist es möglich die "normalized power" noch reinzubasteln? Danke, mach weiter so ...

Alejandro Mata
den 13 maj 2020 | Version 1.2.1

It's quite good, but as someone said before, could you make an option to have all zones with the same width? Otherwise zones 1 and 7 take most of the space and zone 4 is almost invisible... Thanks for the great work!

Svar från utvecklaren
den 14 maj 2020, ronnywinkler

The datafield is designed to show the columns in zones width. The line below with the arrow gives you a linear view of your zones and your current power. Just define the zone 1 and 7 smaller (zone 1 low value, zone 7 high value) to put the focus on the inner zones and unset the option "count only inside zones". So you can arrange the zones much better in the chart without loosing the counting of power outside these zones.

Michele Gizzi
den 8 april 2020 | Version 1.1.1

the app should have the ability to set zones automatically based on profile data such as the heart rate app

Svar från utvecklaren
den 8 april 2020, ronnywinkler

It's not possible to read these zones from user profile. The Garmin API doesn't provide this functionality for apps/datafields.

AlePan
den 3 mars 2020 | Version 1.1.1

All fantastic. But the Power bar Is unbalanced to z7. I tried to modify like in the previous comment but no effect

Svar från utvecklaren
den 3 mars 2020, ronnywinkler

Please use the "contact developer form" to send me your zone definition (values list). Add your email address, so I can answer by mail. Thanks.

Daniele Vignozzi
den 29 december 2019 | Version 1.0.10

Fantastic datafield. Thank you. Very usefull in any ride. May I ask you to add a little title? Just to quickly identify it from your HR zones datafield which is awsome itself. And another idea might be something that indicates balance between left and right, even just a percentage or a slide in bigger fields. Nice job indeed.

Svar från utvecklaren
den 3 februari 2020, ronnywinkler

A caption is added now for this field. Balance (left/right foot?) is not possible to read for a datafield. I added average power instead (as value setable in app options and as pointer in the chart). I hope that is useful, too.

Andreas Schrader
den 21 juli 2019 | Version 1.0.8

Great Datafield. I've been using it for years. Just a little suggestion: Is it possible to spread the bars more evenly? I mean, zone 7 is a very big range (hundreds of watt). I takes most of the space of the datafield. But I hardly ride in Zone 7, but 2-4 instead. Please make all bars the same width!

Svar från utvecklaren
den 23 juli 2019, ronnywinkler

It's already possible. Just change the low value your zones 1 and high value of your zone 7 to a value you want - so the bars get a wished width (e.g. same range like the zones 2 and 6. Then set the app option "Count only inside zones" to "off". The zones 1 and 7 are displayed smaller and all PWR values lower zone 1 will be added zu zone 1 and all PWR values higher that zone 7 will be added to zone 7. Please set the separate option for PWR-max ist you want to display the PWR-% based on PWR-max. It's calculated with this option and not with the high value of zone 7.

Manuel Antonio Gomez Mate
den 18 maj 2019 | Version 1.0.4-upd1

For me it is great. This is what I was looking for. Just a suggestion. It would be great if you can set the average time for Power instead fixed 3s to selectable between 1, 3, 5, and 10. More than 10 it is not very usefull. Regards, Manuel.

Svar från utvecklaren
den 27 juni 2019, ronnywinkler

Thanks for your suggestion. The new version offers you the possibility to select the range in seconds (1..10) for calulation of mean power. Please select it in the app options. The default is 3 seconds.

joopa37
den 11 maj 2019 | Version 1.0.4-upd1

Merci pour avoir ajouter le digit de zone.

Luis Solaz
den 26 oktober 2018 | Version 1.0.4-upd1

Si se pudiese elegir el tiempo de la media además de 3s.que tuviese 10s. etc, estaría muy bien. Y si sólo indicando el FTP ya calculase las zonas.... sería perfecto.

Jörn Conrad
den 19 oktober 2018 | Version 1.0.4-upd1

Sehr gute Visualisierung meiner Leistungsdaten und auf dem 1030er permanenter Begleiter auf dem Rennrad. Vielen Dank an den Entwickler für die Mühe!!

pierluto
den 21 december 2017 | Version 1.0.1-upd

Fatta molto bene, FC e % perfetto. Grazie mille.

Oriol Jiménez
den 6 september 2016 | Version 0.1.5-e82

Awesome

Michael Gregory
den 24 juli 2016 | Version 0.1.5-e8

This is just what I needed. Thank you so much! Works perfectly for me.

McInner Andy
den 13 juli 2016 | Version 0.1.5

Great! 3 sec Power is a good decision! Works perfect!

[민실용]김경민
den 28 juni 2016 | Version 0.1.3

I used the 0.1.1 version I had quite a problem. However, the 0.1.3 version seems to have resolved the problem. I do not speak English well, but I'm not as stupid as you think.

McInner Andy
den 28 juni 2016 | Version 0.1.3

This app works as it's supposed to! No problems with Ant+ sensors! (here: Stages Powermeter and Wahoo HRsensor). (...and it's hard to believe that it might cause problems with sensor reception, because - I suppose - it establishes no connection to any sensor - just reads out data from your Edge)

[민실용]김경민
den 28 juni 2016 | Version 0.1.1

Use heart senser togerter, this power datafield make error...