App Icon

Temps

Beskrivning

A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>

Nyheter

0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66

Ytterligare information

Behörigheter

Den här appen måste ha åtkomst till:

  • Sensordata (d.v.s. ANT+, puls, kompass)
  • Puls-, barometer-, temperatur- och höjdhistorik
  • Approach® S60 Approach® S60
  • Approach® S62 Approach® S62
  • Captain Marvel Captain Marvel
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Darth Vader™ Darth Vader™
  • Descent™ Mk1 Descent™ Mk1
  • First Avenger First Avenger
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain, MARQ™ Captain: American Magic Edition
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Oregon® 7 Series Oregon® 7 Series
  • Rey™ Rey™
  • Rino® 7 Series Rino® 7 Series
  • Venu Venu
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
Medelbetyg: (50 betyg)

Sam
den 20 maj 2020 | Version 0.22

Ok, very very Ok.

Giantmtbiker01
den 15 maj 2020 | Version 0.22

Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.

Geneviève
den 11 maj 2020 | Version 0.22

I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.

Svar från utvecklaren
den 12 maj 2020, jim_m_58

It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.

Zaca
den 2 maj 2020 | Version 0.22

It doesnt work in Forerunner 235, i dont know why, please help me!!

Svar från utvecklaren
den 3 maj 2020, jim_m_58

The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.

Jose Manuel
den 9 april 2020 | Version 0.22

No salecen grados centigrados

Svar från utvecklaren
den 9 april 2020, jim_m_58

C or F is based on a standard setting on your watch. Under Settings/System/Units, set Temperatature Units to C or F.

andre robin
den 31 mars 2020 | Version 0.22

Installed on my Vivoactive HR and doesn't work.

Svar från utvecklaren
den 31 mars 2020, jim_m_58

Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.

Karl Mortar
den 17 januari 2020 | Version 0.21.7

does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.

Svar från utvecklaren
den 17 januari 2020, jim_m_58

The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.

Miguel
den 21 december 2019 | Version 0.21.6

This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!

Svar från utvecklaren
den 22 december 2019, jim_m_58

In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor. As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.

Irek
den 31 juli 2019 | Version 0.20.1

Tego szukałem.

Joe Kelly
den 17 juli 2019 | Version 0.20.1

So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) : Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause. Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.

Yarik
den 9 maj 2019 | Version 0.20.1

Очень полезное приложение для тех, у кого есть garmin tempe. Работает отлично на garmin fenix 5X plus.

Murray Keogh
den 2 januari 2019 | Version 0.18

Great widget Jim! Keep up the good work

Dušan Jurkovič
den 12 december 2018 | Version 0.18

Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?

Svar från utvecklaren
den 13 december 2018, jim_m_58

Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.

Christopher Lawley
den 4 december 2018 | Version 0.18

Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended

Svar från utvecklaren
den 4 december 2018, jim_m_58

Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.

Emanuel Chiculita
den 28 november 2018 | Version 0.18

Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!

barry
den 30 oktober 2018 | Version 0.18

Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???

Svar från utvecklaren
den 31 oktober 2018, jim_m_58

That's the version number of the app.

Alan Formstone
den 25 oktober 2018 | Version 0.18

Excellent. Exactly what i was looking for. Totally 5 stars!

Enrique Del paso
den 30 juni 2018 | Version 0.17-upd3

On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...

Svar från utvecklaren
den 30 juni 2018, jim_m_58

The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.

Łukasz Tatys
den 29 juni 2018 | Version 0.17-upd3

Great and simple

jsanchezi
den 25 juni 2018 | Version 0.17-upd3

Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.

PERO.BS
den 1 maj 2018 | Version 0.17-upd1

Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max

Simon
den 2 mars 2018 | Version 0.17

Top

Jája 🇨🇿👣
den 13 februari 2018 | Version 0.17

Shows only Tempe temperature, Internal "Not Available", F3 HR.

Svar från utvecklaren
den 13 februari 2018, jim_m_58

In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)

Natxo Baile
den 11 februari 2018 | Version 0.16.1

In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app

Svar från utvecklaren
den 11 februari 2018, jim_m_58

The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.

DzoLoMartelet
den 2 februari 2018 | Version 0.16.1

Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.

Det finns tyvärr ingen statistik tillgänglig ännu.