App Icon

Power Bike Pro


POWER BIKE PRO and POWER RUN PRO is a Data Field for 2.4 IQ Devices with for climbing and time trial specialists, performance and racing, This is a Single Field Layout Datafield calculated power when PowerMeter is not present with algorithm similar to Strava tested with Garmin Vector and compatible with Training Peaks and Golden Cheetah. </p><p></p><p>This app is FREE and if you like this software you can give $2 USD on an amazon gift cart to the developer for improving the app to [email protected] or Thanks for support, for more apps visit:</p>


1.0.0 Initial Release</p><p>1.2.0 Expert Configurations Settings Add</p><p>1.3.5 4 Display modes add</p><p>




  • 在活動檔案中記錄額外資訊
  • 您的 Garmin Connect™ 健身設定檔
  • Approach® S60 Approach® S60
  • Approach® S62 Approach® S62
  • Captain Marvel Captain Marvel
  • D2™ Air D2™ Air
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Darth Vader™ Darth Vader™
  • Descent™ Mk1 Descent™ Mk1
  • Descent™ MK2 Descent™ MK2, Descent™MK2i
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 130 Edge® 130
  • Edge® 130 Plus Edge® 130 Plus
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore Edge® Explore
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • First Avenger First Avenger
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 745 Forerunner® 745
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Dual Power fēnix® 6 Dual Power
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6 Pro Dual Power fēnix® 6 Pro Dual Power
  • fēnix® 6 Pro Solar fēnix® 6 Pro Solar
  • fēnix® 6 Solar fēnix® 6 Solar
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Dual Power fēnix® 6S Dual Power
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6S Pro Dual Power fēnix® 6S Pro Dual Power
  • fēnix® 6S Pro Solar fēnix® 6S Pro Solar
  • fēnix® 6S Solar fēnix® 6S Solar
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain, MARQ™ Captain: American Magic Edition
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • MARQ™ Golfer MARQ™ Golfer
  • Mercedes-Benz Venu® Mercedes-Benz Venu®
  • quatix® 6 quatix® 6
  • quatix® 6X quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
  • Rey™ Rey™
  • Venu® Venu®
  • Venu® Sq. Venu® Sq.
  • Venu® Sq. Music Venu® Sq. Music
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
平均評等: (65 個評等)

Felipe Castañeda
2020年8月20日 | 第 2.6.9 版

Tengo una pregunta, en garmin conect después de terminar de entrenar cuando tomo vueltas con el garmin en una subida o algo me aparecen campos de potencia de power bike pro vacíos, ¿como puedo hacer para que salgan los datos de potencia de cada vuelta? de resto perfecta

2020年8月20日, xuxumatu

A ver si entiendo: terminas de entrenar y pones stop y salvas entrenamiento y luego reinicias un nuevo entrenamiento y sale vacío? manda un correo a [email protected]

2020年8月11日 | 第 2.5.8 版

I truly enjoy this datafield, was searching for such fantastic feature! However, I don't understand how I can select the particular computed value I want to display as datafield. How can I choose to only display "Average Power" ? To make it more refined, would you consider : 1 - Synchronise the changes / look & feel of all your "PowerBike" datafields? 2 - Make the parameter both definable via presets (such as VéloTopsEndurance) and manual value (using the links you provide, such as Air Drag Coefficient)? 3 - Add Michelin tyres rolling resistance? 4 - Use live ambient temperature from the integrated sensor (avoiding the hassle to manualy define it before each ride)? 5 - Take decimals in account for Bike weight? 6 - Take tires pressures in account?

2020年8月14日, xuxumatu

Thanks a lot for the review an donation 6 michelins are now on settings and decimals on bike weight.

2020年8月1日 | 第 2.5.5 版

Hi, why limit it to 20 kg. This prevent the use with the most of e-bikes. Hope you widen this range.

2020年8月1日, xuxumatu

Thanks, now it´s fixed.

James Shanahan
2020年7月30日 | 第 2.5.2 版

This App worked great a few days ago. However went for a cycle today and the average watt over the cycle was "1"..? Can this be fixed please..? Once fixed I will update the review as I believe it works.

2020年7月30日, xuxumatu

the new versión is going to work better with auto pause just turn it on

Markus W
2020年7月28日 | 第 2.5.1 版

Just installed and looks fine, but got the same problem as already noted by Marcus, 7.July 2020. The field for 'Rolling Resistance Coefficient' accepts no other value than 0. Garmin Express/Connect are actual and the problem occurs with PC based or mobile app. Other fields like 'Air Drag Coefficient' are ok. Maybe there is no upper range limit set for RRC or the field is handled as integer instead of floating point value!?

2020年7月30日, xuxumatu

Many people reports that bug and fixes with garmin express update, this apps uses coefficients to save memory but if you need a more automatic solution use power bike field or power edge field those are also free.

Paula Urzua
2020年7月20日 | 第 2.5.0 版

I have a problem with the data. It shows me always 0. I have modified the coefficients and nothing, the problem still goes. I have the FR245m with speed and cadence sensor Please help :(

2020年7月22日, xuxumatu

thanks for witting you need a cadence sensor for this to work if you have de sensor detected but it´s not working i gives you zeros, coefficients it´s garmin express problem, update to the latest versión. or ir you are using on a trainer mode better use power bike field 4, its algo free.

Antony VP
2020年7月19日 | 第 2.4.7 版

Bonne application. J'ai un capteur de cadence, mais pas de capteur de vitesse. Ça semble fonctionner. C'est assez complexe a paramétrer et je n'arrive pas a utiliser "." ou "," pour paramétrer le poids, le coefficient de résistance ou toutes autres données.

2020年7月20日, xuxumatu

Merci pour la revue, l'application peut être utilisée sans capteurs mais perd en précision, et pour saisir les données de coefficient en décimales, vous devez mettre à jour votre garmin express et / ou garmin connect à la dernière version, si vous avez un garmin qui le prend également en charge vous pouvez utiliser Power Bike Field ou Power Edge Field, plus faciles à configurer.

Aaron Herrera
2020年7月13日 | 第 2.3.7 版

I'm pretty much with a review down there. The values doesn't make sense to me when using it with a Fenix 6, cadence and speed sensor: Recorded values of AVG power and NP are 2 W and 10 W while Strava the average power is 174 W (Ride with 90 km in 3h, I guess you need to put some Watts for that). Recording is set to 1 s, GPS + Glonass and autostop. Any idea of what could be wrong?

2020年7月13日, xuxumatu

strava watts ara joke the strava algorithm calculates where you are not pedaling, the watts on Power Bike Field are calibrated with garmin vector may be you need to adjust the settings of your weight, height, bike weight and coefficients.

2020年7月7日 | 第 2.3.6 版

This is the best datafield. Exact what I originally expected from Garmin to provide as I learned that Strava has calculated power displayed. Instead of GPS using the Speedsensor additionally on my bike seems to fix issues with unrealistic peak values. I guess ascents are considered by gps signal, wind impacts cannot be considered because no data available at time of recording How does avg power and np power differ in calculation? One configuration issue I found. It is not possible to change rolling coefficient value in setting. As soon as I change the Warning pops up that value cannot be bigger 0 and not smaller 0. Even reentering initial value is not possible. Please fix this and the datafield is perfect for everyone who cannot or dont want to spend lots of money for powermeter

2020年7月8日, xuxumatu

Thanks for the review the algorithm considers air density depending of the altitude and temperature and yes it uses gps and I recommended to change GPS to Glonass or Galileo on 1 second recording for better precision, the decimal input format it’s a garmin express problem update to fix it, np calculations depend of at least 30 min ride above your ftp to be shown

2020年6月20日 | 第 2.2.7 版

I used your Data Field Toaday for the first time. I need to analyze the figures but summary figures are quite strange. AVG Power: 21W (versus 210 by Strava) Max power: 1,957W (versus 1,081 by Strava) NP: 19W FTP Power: 210W AVG Power and NP are not relevant (do they include 0?). I know for sure that I am not able to push 2,000W.

2020年6月20日, xuxumatu

Power Bike Pro uses 20 variables algorithm and Strava has only 16, Strava for example calculates power when you are not pedaling, for better results we recommend you yo use cadence and speed sensor, GPS on 1 Sec, on galileo or glonass, calibrate the altimeter and enable auto pause thanks for the review

Juanjo Delgado
2020年6月19日 | 第 2.2.7 版

La aplicacion funciona aparentemente bastante bien, pero NO permite modificar el "coeficiente de resistencia a la rodadura", que por defecto indica 0,0045. Si se intenta modificar, indica que el Valor debe estar comprendido entre 0 y 0 (Pienso que se trata de un error que deberia solventarse). Dicho error, tambien provoca que el resto de valores (Como peso de la bici, temperatura, FTP, etc.) no puedan modificarse si dicho coeficiente no se deja a 0. En mi caso, lo quiero usar en Bicicleta de Montaña, y seria interesante poder modificar dicho parametro, y por supuesto tambien el resto de valores. Por lo demas, la aplicacion parece genial. El Dispositivo usado es un Edge 530.

2020年6月19日, xuxumatu

Gracias por el review, el problema de la modificación de los decimales no es un problema de la app es un problema de garmin express, intenta descargar la versión mas actual de garmin express o modificarlo con el la app de el movil.

2020年6月15日 | 第 2.2.5 版

На станке Tacx flux smart 2 показания совпали с точностью несколько процентов.

2020年6月16日, xuxumatu

thanks a lot for the review you for better precision on trainer use power edge field on trainer mode

Daniel Aparici
2020年6月8日 | 第 2.2.1 版

Funciona muy bien: sólo necesitas un sensor de cadencia de pedaleo, gps y barómetro en el reloj. Muy útil y perfecto funcionamiento.

2020年6月8日, xuxumatu

Muchas gracias!!!!

Giacomo Maggioli
2020年5月24日 | 第 2.1.0 版

Hi, i really like the app. I was able to use it with my garmin 245 music to show the power coming from giant power meter pro. How can i see the normalized power after the race? I see avg power, ftp power, and ftp time. Also how is the ftp calculated? Thanks a lot for you help.

2020年5月25日, xuxumatu

Hi thanks for the review the ftp is the amount of watts and time you do on Z4 (.75% of your ftp) or higher the power you see on this app it´s not coming for the power meter, it´s estimated power based on algorithm, if you want to see the power of 245 you need this app.

2020年5月20日 | 第 2.0.5 版

Did not work for my Edge 520 plus. It just showed the IQ logo the entire ride. I did not tried anything additional as I tested next to a similar datafield app that actually worked. This one is uninstalled from my device now.

2020年5月21日, xuxumatu

sorry to hear that, just have to restarit thanks for the review

2020年5月2日 | 第 2.0.3 版

Really do like the data field and the displayed power values make a lot of sense ! Math behind this data field is impressive ! Thank you ! Areas for improvement: Unfortunately my summary fields are all 0 Watts in the final summary. I also would appreciate if the font of the data field is better adjusted to the available screen space ! Power is important so I would like to see cPower and aPower on a full screen data field on my Forerunner 945 --- instead I get small text with the values ... would appreciate if the data field adjusts the font sizing.

2020年5月2日, xuxumatu

Thanks a lot for the review, you can also try power edge field for a full screen datafield it´s also free and it´s on my store

Ante Drnasin
2020年4月14日 | 第 2.0.3 版

I've left a review before so I'd like to submit another one because I had issues with this app. I've concluded that the issue was with the Garmin Connect IQ, after the latest update Connect IQ, Power bike pro stopped working and nothing could fix it. I tried many things, but the latest I did was to downgrade Connect IQ and the versions that work are 1.2.1, 1.2.2.., 2.0.0...Now Power bike pro works great again for me. The app is very accurate, compared it with Garmin Vector 3 and the data they gave was very similar. Thanks for this wonderful app.

2020年4月14日, xuxumatu

thanks very much for the review!!!!! i have another app Power Edge Field that has more automatic settings if you want to try have a nice day.

Ante Drnasin
2020年4月9日 | 第 2.0.0 版

The data field was perfect, but since the last update to my Edge 530 the data field only show an IQ error.

2020年4月9日, xuxumatu

Thanks, sorry for the inconvenient now its fixed

Daniel Palomino Antequera
2020年3月27日 | 第 1.9.8 版

Es una buena app y muy interesante. La único es que me sales unos datos de varios muy altos. Como puedo configurarlo?

2020年3月27日, xuxumatu

el cálculo depende de tu peso y de tu estatura, verifica que eso este correctamente puesto en su configuración del garmin connect, y en los settings de la app puedes configurar el peso de la bicicleta los coeficientes de aerodinámica, si quieres batallar menos usa el power edge field o power bike field los settings son mas automáticos.

2020年2月25日 | 第 1.7.9 版

La aplicación cuando la utilizo en la calle funciona genial, pero cuando la uso en el rodillo, veo que la potencia mostrada es muy inestable, con una cadencia constante, la potencia pasa de 30w a 300 en segundos, siendo muy fuctuable. He notado que todo y marcarle que uso rodillo, indica VAM y porcentaje de subida o bajada.Entiendo que no debería ser así, no? Por lo demás es genial.

2020年2月26日, xuxumatu

Tienes que cambiar a modo trainer en settings y esta versión no usa VAM la que usa VAM es Power Bike Field.

2020年2月21日 | 第 1.7.7 版

Por favor, añada el neumático Vittoria Zafiro Pro para tener una mejor estimación al utilizar el rodillo.

2020年2月21日, xuxumatu

claro que si Felix lo añado en el próximo update gracias por la reseña.

2020年2月18日 | 第 1.7.6 版

It is good to use with roller?

2020年2月19日, xuxumatu

Thanks for the review, and yes it has a trainer mode in settings.

2020年2月8日 | 第 1.5.4 版


2020年2月8日, xuxumatu

thanks a lot i have another apps with the power bike pro engine

Omar Humberto Gómez Orozco
2020年2月1日 | 第 1.5.3 版

The best power estimation on the store by far