Name: Rider Window 2.0 版 (新增計圈速度顯示)
Rating: 4.7 (33 reviews)
Author: darkthread

** Note: Please remove and reinstall data field to add lap speed setting, and lap speed feature needs Connect IQ version 1.3
========================== Features =========================
* Display CAD, HR, PACE in different colors to give sport strength information.
--- HR ---
based on user profile's HR ranges settings:
Gray: Warm Up / Blue: Easy / Green: Aerobic / Orange: Threshold / Red: Maximum
Reference: https://goo.gl/xzEDXD

--- CAD ---
Red: current cadence is less than 60
Green: current cadence is between 60 and 90
Blue: current cadence is greater than 90
--- SPD ---
Current speed mode
 Red: current speed is slower than 90% average speed 
 Green: current speed is between 90% and 110% average speed 
 Blue: current speed is faster than 110% average speed 
Lap speed mode
 Red: current speed is slower than 90% lap speed 
 Green: current speed is between 90% and 110% lap speed 
 Blue: current speed  is faster than 110% lap speed 

* Configurable Max HR, Low CAD/High CAD for color switching by App Settings (Only for Fenix 3 software version 5.0)
* ALT field can be disabled by App Settings (Only for Fenix 3 software version 5.00)
* HR can be replaced with HRR% by App Settings (Only for Fenix 3 software version 5.00)
* Background mode setting: Auto(based on datafield backgound), Black or White (Only for Fenix 3 software version 5.00)
*** If auto background doesn't work as your expectation, you can set it by app setting.
HOW TO SET APP SETTINGS? https://apps.garmin.com/settingsHelp
**NOTICE** App Settings is only supported on Fenix 5.00 firmware with CIQ 1.2.1. If you are using a older version, you can use Runner Window with default values before software upgraded. If you can't open the App Settings editor and got error, please check your Fenix 3 software version.
================================================================

Yet another complex running information data field.
I want to see all the information of running in a single screen, so I wrote this data field for myself.

Rider Window is composed of 9 fields, including current time, timer time, cadence(stride), average speed, altitude, grade(slope), total distance, heart rate and current speed(average over 30-60 seconds). It also provides battery power percentage and GPS signal quality information.

Introduction with pictures : http://blog.darkthread.net/post-2015-10-16-runnerwindow-riderwindow-for-fenix-3.aspx
FB：https://www.facebook.com/darkthread.net

Rider Window Ver 2.0 (Lap Speed added)

請重新安裝以取得計圈速度選項

=========== 特色說明 ==============
* HR, CAD及PACE欄位加入顏色顯示運動強度
* 客製化參數：ALT顯示切換, HR/HRR%顯示介換, Low CAD, High CAD, 背景色

*** HR ***
依個人設定跑步心率區間變換顏色
灰: 暖身區 / 藍: 燃脂區 / 綠: 有氧耐力區 / 橘: 馬拉松配速區 / 紅: 無氧耐力區
參考：https://goo.gl/RBrghC

*** CAD ***
紅: 踏頻 低於 60
綠: 踏頻 介於 60 到 90 之間
藍: 踏頻 高於 90
*** SPD ***
目前速度模式
紅 目前速度比平均速度慢10%以上
綠: 目前速度介於90%到110%平均速度之間
藍: 目前速度比平均速度快10%以上
計圈速度模式
紅 目前速度比計圈速度慢10%以上
綠: 目前速度介於90%到110%計圈速度之間
藍: 目前速度比計圈速度快10%以上

===================================
懶得跑步時還要按鈕切畫面看資訊，身為程式魔人在GPS錶上寫個程式給自己用，也是很合理滴～

RunnerWindow 總共包含九種跑步資訊，包含現在時刻、跑步時間（Time）、步頻（Cadence）、平均步速（Avg Pace）、海拔高度（Altitude）、坡度（Grade/Slop，每100公尺上升或下降幾公尺，以百分比表示）、心率（HR）、目前步速（Pace，採30-60秒平均值），另外再加上電池電量百分比以及 GPS 訊號狀態（包含訊號強弱顯示）。平約步速與高度、爬升率共用最中央的顯示位置，採智慧切換頻率。RiderWindow與RunnerWindow功能相同，只有將目前步速及平均步速改為目前時速及平均時速，方便自行車運動時使用。

圖文說明：http://blog.darkthread.net/post-2015-10-16-runnerwindow-riderwindow-for-fenix-3.aspx#chinese
安裝說明：http://blog.darkthread.net/post-2015-11-02-how-to-setup-runner-window.aspx
設定參數：http://blog.darkthread.net/post-2015-11-17-runnerwndow-1-6.aspx
FB：https://www.facebook.com/darkthread.net