App Icon

Running Power

說明

This app displays your current running power. If you are new to training with running power, try this one first.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garmin devices to calculate and show your running power in real time — as well as after your run.</p>

最新資訊

Changes made from version 1.60 to 1.70:</p><p>- Fixed an issue with Lab Averages within workouts</p><p>- Support for the Fenix6/6s/6x series</p><p></p><p>Changes made from version 1.50 to 1.60:</p><p>- Updated compatible devices</p><p></p><p>Changes made from version 1.40 to 1.50:</p><p>- Support for the Forerunner 945 and the MARQ collection</p><p></p><p>Changes made from version 1.30 to 1.40:</p>

額外資訊

權限

此應用程式需要存取:

  • 透過 ANT Radio 傳送/接收資料至/從協力廠商的感測器
  • 未啟用時在背景執行 (可能會影響電池壽命)
  • 從/向網際網路傳送/接收資訊
  • 在活動檔案中記錄額外資訊
  • GPS 位置
  • 心率、氣壓、溫度和海拔高度紀錄
  • 您的 Garmin Connect™ 健身設定檔
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain, MARQ™ Captain: American Magic Edition
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
平均評等: (128 個評等)

Maxim Sloyko
2020年7月7日

The power estimates are completely bonkers. My Stryd shows power that is 100W or so lower! And I know that the Stryd number is more accurate, because my run FTP, as estimated by Stryd is much closer to my cycling FTP, measured with a different power meter (obviously).

Thiago Bittar
2020年7月7日

The data is well captured by the device, however, after that it’s basically ignored by the whole Garmin analysis, reports, comparisons to paces, HR, over time, it’s kinda of just collecting data without no reason. It does not give you an idea of FTP. Also, it does not transfer to Strava either. Garmin, those are easy fix in SW, the device is great. Thanks

Paul Rosenberg
2020年6月29日

Just adding to the list of users experiencing scaling issues. I using a 6s.

Martin Jönsson
2020年6月22日

Cool function. Fields do not scale correctly on Felix 6 though. In a 4-field setup you only see half of the numbers which looks kind of ugly...

Sam Cadby
2020年6月10日

Doesn’t scale correctly on screens with more than 5 data fields - the ‘power’ title font does not scale, is too big for the cell, and value gets cut off as a result.

Zoltan Kovacs
2020年6月10日

It doesn't work on my Garmin Fenix 5X. It shows 0, ZERO. Maybe I'm sweating without do anything?

Davide Di Vito
2020年6月4日

with new view of garmin connect app from phone, with scheduled workout with repeated interval training, doesn't show the column with lap power value. Ok instead when i connect to Garmin connect server, i can see normally the column with power values

Marco
2020年5月23日

Davvero un parametro interessante! Ha cambiato il mio modo di allenarmi sulle ripetute!!! Ottima con Fenix 5plus!!

Tom van der Sande
2020年5月19日

Power seems to be way too high compared to cycling power. A 4.47min/km (HR zone2) easy run gave me an average power of 319W, for the bike this would be 180-200W for a similar heart rate.

BT
2020年5月16日

Works smoothly with my FR945 and pod. Very consistent measure.

APFFM
2020年4月25日

Gorgeous on Fenix5! Thx

TomLaf
2020年4月20日

Very useful but can't be used on screen with multi datafields. The power value is truncated at the bottom.

Imran Ali
2020年4月6日

Useful training data field. No issues with this for me on my FR945. The data field updates real-time whilst using in conjunction with the Running Dynamics pod. Syncs with Garmin Connect, all good. Shame about all the negative reviews.

Hans ter Horst
2020年3月31日

Works perfectly fine with my fenix 5x and pod, and the app is free, so why complain?

Pottier Stéphan
2020年3月27日

les puissances sont bien trop elevées. Powers are too much high. useless and screw my stats whit training peaks .... stuff : fr935 + hrm4

Drew
2020年3月25日

I'm curious as to the negative reviews on this, I surmise that some aren't using the required equipment (need a Pod or Strap to get the Power data in the field, watch alone won't work). It works beautifully for me. I can drop the power data into any data field no matter how many are on the screen. I have a screen with Power, Heart Rate, Pace, and Lap time remaining. I can use a combination of these to ensure I hit the right speed and HR.

Brad Lane
2020年3月23日

Needs to support other power pods (e.g. - Stryd)

Peter Airbilly Bilik
2020年3月22日

Please make it possible to run on multi field screen. Now I don't see the wattage

St. Clair Mellard
2020年3月9日

I use power meter on my bike and the values are not the same but it is consistent. I am able to use it effectively to control heart rate. I use the HRM Tri and I wonder what a pod on my shoe would say

Dragos
2020年3月4日

I used with Fenix 5xPlus and it was useful. I installed on 6x Pro and even the app appear in data fields on Garmin connect, nothing on watch, like it is not installed. I used with dinamic pod. Could have some advice? Thank you.

Johan Liebenberg
2020年3月2日

On Fenix 6 with 5 or 6 data field display, the power is not fully visible as it gets cut off. The word "Power" is too big and you can only see half of the power reading. A suggestion would be to make this adapt like the other standard data fields.

Eran Levi
2020年2月26日

Works well on the watch and data is also available in Garmin Connect. Good job!

Tim Banting
2020年2月24日

Really confusing. In Garmin Connect you can have power zones set based on FTP and a Lactate threshold test. On the mobile app it doesn't seem to sync the sheetings and the zones don't map.

Mark
2020年2月21日

Power gauge working well. Set alerts for zone 2 power range, and get sufficient high and low alerts. Alerts would be better if they could also vibrate (like other training alerts) so you know to look at your watch. Would also be better to integrate running power into normal training widget (like cycling power training) as a lot of training programs can now upload running workouts with power intervals.

Mauricio León
2020年2月8日

The power graph drops to 0 for some seconds several times during all my treadmill activities since version 1.70 published on September 13, 2019. Before that it was ok indoor and outdoor.

抱歉,尚無統計資料。