Simply Altitude

开发人员的回复
2021年6月23日, simonletts

Thanks for your review. If you have a request it's always best to contact the developer directly. Widgets time out and as such are not meant for the on-going long term display of information.This widget is simply used to show the current value of a sensor so I implemented it as a snapshot with no further complications.

开发人员的回复
2021年6月14日, simonletts

Thanks for your kind review. I can't really take credit for it working well though - it's your watch that's getting the data. I just display whatever it gives me.

开发人员的回复
2021年5月25日, simonletts

如果您的手表是这样想的，那就是我的应用程序将显示的内容。 它只是显示从设备中获得的信息。 If that's what your watch thinks, that's what my app will show. It just displays what it gets from the device.

开发人员的回复
2021年5月25日, simonletts

Thanks. I'm glad it works for you. Also, I apologise if you you think I'm rude (you'll see that's not always the case!). But I get fed up with people being rude about the app, i.e. me, when in reality the app works as it should but the issue is with the watch. 1) Read the description. 2) Contact me directly - you'll always get a positive response.

开发人员的回复
2021年4月16日, simonletts

I'm sorry you don't understand the limitations of this app. It simply displays the altitude given to it by the watch, no more, no less. If you have a question, please contact me directly.

开发人员的回复
2021年1月28日, simonletts

I am very sorry you don't work. I am also sorry you don't know how to use your watch, perhaps you should have asked for help. The widget does work, it displays what the watch tells it, good or bad.

开发人员的回复
2020年12月27日, simonletts

1. You should try contacting the developer for help before leaving a poor review. 2. Calibration isn't impossible. It's a function of the watch, not the app. I recalibrate mine frequently. If yours doesn't allow it, blame it not me.

开发人员的回复
2020年10月20日, simonletts

Thanks for your kind review. It's good to know it works correctly on your watch.

开发人员的回复
2020年9月10日, simonletts

Thanks for your kind review. Very happy it does what you want & glad I could help.

开发人员的回复
2020年8月12日, simonletts

Thanks for your understanding review. I recognise the limitations of my widget with non-barometric devices. I decided it wasn't up to me to not make the app for those watches, it was up to the user to understand their watch and make an informed decision as to whether the app was for them or not.

开发人员的回复
2020年8月5日, simonletts

Thank you for your review. If you need help it's better to use the Contact Developer link than a review. If you read the app description you will see I have already included a link to Garmin's instructions about how to calibrate the vivoactive 3.

开发人员的回复
2020年7月16日, simonletts

Thanks for your kind review. Good to know it works with the Venu.

开发人员的回复
2020年7月13日, simonletts

I'm sorry you can't get my app to work. It just shows what the watch gives it. If your device isn't calibrated you won't get good results. The problem is with the device not the app. If you use your watch properly the widget works well. If you think the issue really is the app why not ask for help before leaving a poor review?

开发人员的回复
2020年7月1日, simonletts

I'm sorry you couldn't get my app to work on your watch. Why not contact me for assistance before leaving a poor review? In what way did it not work? If it really doesn't work I want to know more so I can fix it. The Forerunner 245 doesn't have a barometric altimeter. Did you make sure you had a good 3D GPS fix before using the widget? The app just reports what it gets from the watch.

开发人员的回复
2020年7月1日, simonletts

Thanks for your review. I'm glad it's working for you.

开发人员的回复
2020年5月22日, simonletts

Thanks for your review. My app simply shows your altitude, in a large font, as that was all I needed. If you want more information myABC would be a good choice.

开发人员的回复
2020年5月8日, simonletts

that's great. thanks!

开发人员的回复
2020年3月5日, simonletts

Thanks for your review. I'm glad you understand how to use it! As you say, if the watch isn't calibrated the widget will show the wrong value.

开发人员的回复
2020年3月1日, simonletts

As the description says, the widget simply reads and displays the watch's own sensor value. What you see is what the Garmin system provides. An uncalibrated watch gives poor results. I understand some watches are worse than others.

开发人员的回复
2020年3月1日, simonletts

Thanks for your kind review. Fortunately, it seems, your watch - like my own - returns good altimeter sensor values.

开发人员的回复
2020年1月7日, simonletts

Before leaving a poor review please contact me directly with any questions. As I said in the description the app uses the units set for the watch.

开发人员的回复
2019年10月7日, simonletts

Thanks for your review. I guess the 735 only supports altitude from GPS and you didn't have 3D fix. Unfortunately, as I only have access to my own watch, I don't know the capabilities of all the other possible devices. A shame, I'm sorry it doesn't work for you.

开发人员的回复
2019年10月2日, simonletts

Please contact me first if you have a problem. As the description says, the widget simply displays the altitude returned from the Garmin firmware. If your watch hasn't been calibrated, can't be calibrated or doesn't have access to altitude, unfortunately the results will be poor. The app has no way of knowing if the value it gets from the underlying hardware is good or bad.

开发人员的回复
2019年8月7日, simonletts

I'm sorry the app doesn't work with your watch. It just displays what the Garmin system gives it. If there's no data available it should display 0000 and a message in the top label. Unfortunately, as I only have a Vivoactive HR that is the only real device I can test.

开发人员的回复
2019年6月5日, simonletts

Grazie per la tua gentile recensione.