App Icon

Running Power

说明

This app displays your current running power. If you are new to training with running power, try this one first.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garmin devices to calculate and show your running power in real time — as well as after your run.</p>

新功能

Changes made from version 1.60 to 1.70:</p><p>- Fixed an issue with Lab Averages within workouts</p><p>- Support for the Fenix6/6s/6x series</p><p></p><p>Changes made from version 1.50 to 1.60:</p><p>- Updated compatible devices</p><p></p><p>Changes made from version 1.40 to 1.50:</p><p>- Support for the Forerunner 945 and the MARQ collection</p><p></p><p>Changes made from version 1.30 to 1.40:</p>

附加信息

权限

此应用程序需要对下列各项的访问权:

  • 通过 ANT 无线电向/从第三方传感器发送/接收数据
  • 当处于非活动状态时,它在后台运行(可能影响电池使用时间)
  • 面向互联网双向发送/接收信息
  • 将其它信息记录到活动文件中
  • GPS 位置
  • 心率、气压、温度、和海拔高度历史数据
  • 您的 Garmin Connect 健身档案
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
平均评级: (117 个评级)

Hans ter Horst
2020年3月31日

Works perfectly fine with my fenix 5x and pod, and the app is free, so why complain?

Pottier Stéphan
2020年3月27日

les puissances sont bien trop elevées. Powers are too much high. useless and screw my stats whit training peaks .... stuff : fr935 + hrm4

Drew
2020年3月25日

I'm curious as to the negative reviews on this, I surmise that some aren't using the required equipment (need a Pod or Strap to get the Power data in the field, watch alone won't work). It works beautifully for me. I can drop the power data into any data field no matter how many are on the screen. I have a screen with Power, Heart Rate, Pace, and Lap time remaining. I can use a combination of these to ensure I hit the right speed and HR.

Brad Lane
2020年3月23日

Needs to support other power pods (e.g. - Stryd)

Peter Airbilly Bilik
2020年3月22日

Please make it possible to run on multi field screen. Now I don't see the wattage

Imran Ali
2020年3月13日

Useful training field. No issues with this for me on my FR945. The data field updates real-time during both indoor and outdoor activities. Syncs with Garmin Connect, all good.

St. Clair Mellard
2020年3月9日

I use power meter on my bike and the values are not the same but it is consistent. I am able to use it effectively to control heart rate. I use the HRM Tri and I wonder what a pod on my shoe would say

Dragos
2020年3月4日

I used with Fenix 5xPlus and it was useful. I installed on 6x Pro and even the app appear in data fields on Garmin connect, nothing on watch, like it is not installed. I used with dinamic pod. Could have some advice? Thank you.

Antoni Pons
2020年3月4日

Scam. You need to use HR monitor from Garmin, which is x5 times more expensive than a normal one...

Johan Liebenberg
2020年3月2日

On Fenix 6 with 5 or 6 data field display, the power is not fully visible as it gets cut off. The word "Power" is too big and you can only see half of the power reading. A suggestion would be to make this adapt like the other standard data fields.

Eran Levi
2020年2月26日

Works well on the watch and data is also available in Garmin Connect. Good job!

Tim Banting
2020年2月24日

Really confusing. In Garmin Connect you can have power zones set based on FTP and a Lactate threshold test. On the mobile app it doesn't seem to sync the sheetings and the zones don't map.

Mark
2020年2月21日

Power gauge working well. Set alerts for zone 2 power range, and get sufficient high and low alerts. Alerts would be better if they could also vibrate (like other training alerts) so you know to look at your watch. Would also be better to integrate running power into normal training widget (like cycling power training) as a lot of training programs can now upload running workouts with power intervals.

Mauricio León
2020年2月8日

The power graph drops to 0 for some seconds several times during all my treadmill activities since version 1.70 published on September 13, 2019. Before that it was ok indoor and outdoor.

tlonsway
2020年1月31日

Had to add custom field to running app on my Fenix 5 them I was able to see the chart. Interesting metric.

Ericlauzon
2020年1月22日

Doesn't work with forerunner 935....

Stanislav
2020年1月21日

Doesn't work in my 935. Garmins apps are pretty lame. Does Garmin care about customer? Flagship and apps lame and watch freezes when using maps...

Jose Avila
2020年1月16日

Doesn’t show any power with my hrm-tri and a garmin 935. Please fix!

Thomas Tiotto
2019年12月24日

The power number is cut off as the “Power” header is to large in the data field.

Logan Petty
2019年12月23日

Really like it, but weird formatting bugs on FR945 after firmware 3.90 update.

buddhah_au
2019年12月3日

Recently stopped working on Fenix 5x!! Please fix.

Martin Christensen
2019年12月3日

Useful consistent feedback on pace and effort, started liking this a lot considering the rather poor fenix5+ actual pace measures. Today it stopped showing any value though, but guess this is a bug that will be fixed soon.

Gabriel Fernandes Silva
2019年12月3日

Suggestions: 1) Bigger numbers in single mode field, so people with vision problems can read easier 2) Allow power data to be uploaded to Strava 3) Release a Garmin tutorial to set Power Zones (what test we should do to determine power zones)

Albert
2019年11月30日

Not working on Fenix 6X with Stryd. Please, we need native power integration from Stryd on all running modes... I'm training with power zones and its a must

Heined
2019年11月22日

Not working with Fenix 6X Pro running 4.30

  • 1(共 3)

抱歉,尚无可用的统计信息。