2020年6月7日 | 3.3.3 版
How do you get "Focus" and "Difficulty" as shown on the screenshots? Only prefills MPA and Power
2020年2月12日 | 3.3.2 版
Won't budge off 130 MPAand use my actual MPA. Tried all the tricks, used for hours, reinstalled etc, etc! Pretty frustrating. I'm using a garmin 1030 with current firmware.
Contact support. They can help you with it.
2020年2月3日 | 3.3.2 版
Excellent! Data field works flawlessly on Forerunner 735XT. I like the colour coded power that I am used from the mobile app and it is very convenient that power and MPA are displayed in one field.
2019年11月26日 | 3.3.2 版
Не обновляется поле данных MPA.
Use the Garmin ConnectIQ App to update it!
Mohammad Faisal Bin Abdul Ghani
2019年11月11日 | 3.3.2 版
Naing Moe Aung
2019年11月1日 | 3.3.2 版
2019年8月26日 | 3.3.2 版
This is a must have datafield. It's sort of a "fuel gauge". Great pacing tool.
2019年3月27日 | 3.11-upd2 版
Works great, pretty much as advertised.
For those who see their MPA stuck at 1200W, here are the steps that I had to take to get it to work sync after installing the data field and entering my Xert ID and password on an Edge 520.
1) Phone on, Garmin connect running,
2) Edge520 on, BT on and phone connected
3) Enable the data field in one of your activity profiles
4) Switch to a different profile and start an activity
5) Switch BACK to the profile with the MPA field, start an activity. You should see a yellow dot to the left of the MPA (Still at 1200 for now)
6) Make sure the activity is actually running not paused
7) Wait anywhere from 30" to a few minutes for the Garmin to connect to your phone for the settings
8) Dot should turn green and voila your MPA will now read what is seen in your Xert webpage
As far as how useful this is for racing. I think for wheel-to-wheel racing, it's kinda limited. At the effort levels when you're trying to jump on a break, bridge a gap or whatever, it's not like you have much of a choice how hard to go or for how long. You either need to establish a gap or close it. If that exhausts your MPA, well that's that.
I was hoping that it would show my MPA has refilled even though RPE didn't feel like I was recovered. But in any REAL road racing, you are rarely recovered once the attacks start until the race is over or you're dropped and sit up.
2019年1月18日 | 3.11-upd2 版
Cant even add it to a datapage. Tried dif page layout, but nothing works
Hey Nicolai. It's no different than any other Garmin datafield that you'd add to your activity profile. You can contact [email protected] if you are still having trouble.
2018年10月21日 | 3.11-upd2 版
I find this (and the other related data widgets from Xert) really helpful as they quantify the efforts you are making and guide you, not only for making improvements, but in recovery rides too.
If, like me, you find the setup problematic when upgrading to the latest versions try this really helpful guidance page at Xert:
Remember to turn on your device and start recording for a few minutes to get the fitness signature updates - can take a few minutes!
You need a device supporting ConnectIQ 2 to get auto signature updates each ride.
2018年4月22日 | 3.07 版
It was better old version without user name and passwort and with manual fitness signature updates. I stop to use it.
2018年4月10日 | 3.06 版
It works great! The auto-update saves a lot of hassle which is great. It really takes the garmin to a new level for training.
I'm still learning how to get the most out of the Xert Platform, but so far it replaces my trainerroad subscribtion during the summer time.
2018年4月5日 | 3.06 版
Great app just got a lot better with the signature auto update. Brilliant, thanks for this new feature!
2018年3月19日 | 3.06 版
Latest app will not work with the Edge 1030 it appears it doesn't communicate with GCM to auto update the signature now I am just stuck with the default 1200 MPA.
You may just need to start a recording to get the app to fetch the new values. It might take 5 minutes or so. If you happened to have done a hard reset on the 1030, it unfortunately may then take a few hours. Issue we let Garmin know about.
2018年1月15日 | 2.3.0-upd 版
Wrong values concerning MPA ... on yesterday's ride I should have had at least three Breakthrough efforts (although MPA value decreased too fast in my opinion), my garmin 1000 showed even a breaktrough badge ... in the end on xertonline I had not even one.
may be a good approach, feels embryonic.
Try configuring it with your Xert Code. It will correct the errors in MPA.
2017年10月8日 | 2.3.0 版
I love this app and everything that stands behind it!
I have two comments though:
1. The MPA field seems to have a wrong value. My MPA in xertonline is around 800, but the app on my Garmin has it as 1200... making it ineffective.
2. While I fully understand the math behind TrainingPeaks, Xert has a bit of a learning curve, at least for me. I tried to load "all" the xert apps into my Garmin 520, but then found that it is limited to 4 ConnectIQ fields, forcing me to choose some xert metrics over others. It would be great if Xert could provide a single app (datafield) that has all the relevant metrics, and have Garmin refer to it as a single ConnectIQ.
Nevertheless, very interesting approach to training!
Formatting a multi-datafield app for all the various screen sizes and activity profiles is the main challenge. We are considering a number of updates including what you're suggesting as well as a new apps with additional metrics, improved algorithms and reducing reliance on Garmin Express/Garmin Connect Mobile for configuration. Thank you for your comments.
2017年7月19日 | 2.7-upd 版
Is this going to be available for the 935 anytime soon?
2016年7月20日 | 0.4.3-e8 版
Genial para entrenamientos por potencia, información valiosa en combinación con la web
2016年5月15日 | 0.4.3 版
GasDoc - email me directly through Cycling Center Dallas and I will walk you through setup. It's not Xert, it's Garmin.
Gabriele Tarsia Incuria
2016年4月28日 | 0.4.3 版
If I put my code, the app stop to work and stuck the possibility to add more app
2016年3月31日 | 0.3.0 版
Okay - if there was ONE APP that could alter your training and testing and competitive nature forever, THIS IS IT! Used in conjunction with XertOnline, you'll be able to actually determine, in REAL TIME, your Maximum Power Available, and see JUST HOW MUCH JUICE you have left in your system, for any interval of time! Use for interval training, use in rallies, use in racing, all of it. THIS IS GOLD!