Temps

开发人员的回复
2021年7月4日, jim_m_58

It's trying to connect to a Tempe sensor, Do you have one? If not, all you will see is the internal temperature sensor, which is usually somewhere near ambient temperature, and not really your body temperature. It's the the temperature of the watch,

开发人员的回复
2021年6月21日, jim_m_58

The problem with min/max from the tempe, is that a native sensor,24hrmax and min aren't available. To determine the max and min myself, It would need to be in a background service that runs every X minutes, but the tempe can take a minute or more to connect, where a background can run for at most 30 seconds, so I'd miss a bunch of data. It would also impact the battery..

开发人员的回复
2021年6月6日, jim_m_58

To see the ambient temperature, you need to have a Garmin Tempe and have it paired with your watch.

开发人员的回复
2021年3月23日, jim_m_58

The venu sq doesn't have an internal temperature sensor so for anything to display you need an external Tempe sensor.

开发人员的回复
2021年3月17日, jim_m_58

This doesn't help anyone. Use contact developer and tell me what watch, if you have a tempe connected, etc..

开发人员的回复
2021年3月10日, jim_m_58

With a tempe sensor it can take up to a minute to connect, and on some devices the widget can time out before that happens. Press the upper right button every 20 seconds to restart the time out. You do have a tempe paired to the watch, correct?

开发人员的回复
2021年2月11日, jim_m_58

No. That would require an on-going connection to the tempe, and that would cause some issues like battery drain.

开发人员的回复
2021年1月23日, jim_m_58

One thing about the tempe is is can take up to a minutes to connect, and on a venu sq, widgets time out in less than a minute, So you may have to do something like tap the screen every 20 seconds to keep the widget from timing out.

开发人员的回复
2021年1月2日, jim_m_58

The Venu Sq doesn't have an internal temperature sensor (it's related to not having a baro altimeter) so all it can show is a tempe if you have one paired and connected.

开发人员的回复
2020年12月9日, jim_m_58

Please use "contact Developer" to let me know what's not working, as leaving a 1 star review with no words is useless to both me and other users.

开发人员的回复
2020年9月3日, jim_m_58

No impact on the battery life, as it's a widget and only runs for a short time. I in fact wrote it when native temperature widget started not showing the internal temperature if a tempe was paired.

开发人员的回复
2020年8月18日, jim_m_58

The Tempe is an external sensor, and if you don't have one or it's not paired, this is what you'll see. The internal temperature is the temperature sensor inside the watch. It's internal to the watch, and not body temperature as it's impacted by the ambient air. On the watch, to to settings-system-units and set temperature units to either C or F

开发人员的回复
2020年7月8日, jim_m_58

Pairing refers to a paired Tempe Sensor. Do you have one? The internal temperature is not available on the s62, so a tempe is the only option.

开发人员的回复
2020年6月26日, jim_m_58

The f3 doesn't support CIQ reading the internal temperature. Internal temp is only available on newer devices.

开发人员的回复
2020年6月11日, jim_m_58

I'll add it to my list of things to look into

开发人员的回复
2020年5月27日, jim_m_58

You must be thinking of a different widget as this one never vibrates. Could it be the FW is doing a vibrate when it connects to the tempe?

开发人员的回复
2020年5月12日, jim_m_58

It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.

开发人员的回复
2020年5月3日, jim_m_58

The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.

开发人员的回复
2020年4月9日, jim_m_58

C or F is based on a standard setting on your watch. Under Settings/System/Units, set Temperatature Units to C or F.

开发人员的回复
2020年3月31日, jim_m_58

Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.