23 พฤษภาคม 2562 | Version 2.61-upd7
I loved it on my Edge 520. Could you please make it compatible with 530? I miss it already!
26 พฤษภาคม 2562, bjarnib
Just released ver 2.7
steven van heerden
9 เมษายน 2562 | Version 2.61-upd7
Works nice i on my edge 520 plus. Easy to ride right watt zones on the road. Graph in the middle is nice to see past few seconds. Like the colours. Lap time doesn't stop when ride is paused.
25 มกราคม 2562 | Version 2.61-upd7
5 พฤษภาคม 2561 | Version 2.61-upd5
This app is good for what it does, which is to show graphically the wattage being put out. I use it mostly for indoor sessions that require me to hit a watt zone target for a lap time (lap time is my second field, 3s watts is the main). After some non-intuitive fiddling with the zones, I've managed to show the zones the same as my lactate blood tested zones. However, there's a really annoying display feature with 5 numbers evenly spaced that have NO correlation with the zones... the colours and the Z meter field are accurate, but those 5 crappy numbers are really distracting... but can't be turned off.
(even in the picture description it's faulty. The 1 is next to the grey, the 2 is next to the light green z2, but the 3 is next to the z4 yell and the 4 is next to the z6 red band.)
3 star until the developer gets rid of the useless and distracting 5 number series, or replaces them with the real zone numbers.
5 พฤษภาคม 2561, bjarnib
Hello Matthew and thanks for the review, To clarify, the numbers around the scale are denoting the wattage scale (x100) for some reference. I.e. 1 denotes 100, 2 for 200 etc. The throught being to tie the othewise non-labeled zone pallette to a wattage scale. Hope this explains this a bit.
10 กุมภาพันธ์ 2561 | Version 2.61-upd2
Why do I have 10 zones on my Garmin 520? How about making it so that you can choose between a 5/7 zone system? And the option to choose % or zone 1/5/7?
10 กุมภาพันธ์ 2561, bjarnib
Please get in touch directly via the email link if you have questions. I will be happy to work with you. Note that by defining the zones properly you can effectively choose the number of zones displayed on your device. The zone definition in percentages allows you to change only your FTP as it changes and not reenter all the zones.
14 มกราคม 2561 | Version 2.61-upd
I've been using this data field on my Fenix 5x for about five rides so far. It has been really helpful. What's great is the ability to create custom zones, change smoothing options, and display cadence. The little time vs power plot is helpful too; it's nice to know which zones I was in when I wasn't looking at my watch. Like another commenter requested, I would also like to be able to edit the zone names. I use the same zone definitions as that person (1,2,X,3,Y,4,5). Thank you!
13 มกราคม 2561 | Version 2.61-upd
Seems to work great on a fenix 5s for running power so far, Not sure if its doable or a quick fix but Can you code it so the Zone txt is editable?
Id like it to say 1, 2 , x, 3 , Y, 4, 5 rather than 1,2,3,4,5,6,7 to mach the zones I use.
Also id like to use your hr guage on the Fenix 5s I have if that can be coded as well!
5 มกราคม 2561 | Version 2.61-upd
Great idea, but still testing it. I have a Fenix 5x and can't figure out how to change the app's settings; it is not clear to me from the write-up. I'd like to experiment with the 3s/10s/30s averaging, and with the %FTP zones. Also, is it possible to set the extra field to pace? Thanks.
28 ธันวาคม 2560 | Version 2.61-upd
On my Fenix 3 hr doesn’t work.
Problaby its my fault....
Somebody can explane to me the correct use of this app? Thanks a lot....
28 ธันวาคม 2560, bjarnib
Please check the instructions on the download page. You need to create a new screen with only one field and then you select the ConnectIQ field PowerGauge to display on the screen. This is helpful also : Check the section on Data Fields. http://www.dcrainmaker.com/2015/01/connect-iq-intro.html
Also make sure you have a poer meter connected and providing data to your fenix. This app requires a power meter to work.
25 ธันวาคม 2560 | Version 2.61-upd
Great. Stable, works as described on my Fenix 3. Good UX, readability. The smoothing options meet my needs, usually 3s. One more field would be nice, and I'd make it my home data screen.
6 ตุลาคม 2560 | Version 2.61
This App works fine on Edge 1030.
Some suggestions for a little improvement: The power curve in the middle is not very useful. Its better to create another field and move the power field to the position of the curve. The new field has the same format as power data field, where the user would select between hr, km/h, cadence etc.
5 ตุลาคม 2560 | Version 2.61
This is the perfect app (version 2.61) to visualize your power zones for running (with STRYD foot pod) and cycling. I use this app on FR935 (running power) and Edge 1030 (cycling power) without problems. Very useful is that you can adjust the low power value from 0 Watt to 200 Watt and the high power value down to 300 Watt. So you can get a high resolution of visualization of the really interesting power zones.
25 สิงหาคม 2560 | Version 2.4
Works well on edge 520. Use this screen most of the time. Easy to configure zones for an old bloke who can't see small numbers when riding.
2 กรกฎาคม 2560 | Version 2.4
How I can configure the data fields and zones for this app on my garmin 820?
3 พฤษภาคม 2560 | Version 2.32
Works really well with the Fenix 3. Would be great if your FTP could sync with Garmin user settings.
30 เมษายน 2560 | Version 2.32
Working brilliantly with Stryd for running on the F3. If only the power designation range (1-2-3-4-5) was moved on the inside as it overlaps with average power on top. Z1 for running is around 80-90% for running, so half of the range is Z1. Could we also request for more options for runners like pace, HR zone, vertical speed (essential for hill climbing) etc?
22 เมษายน 2560 | Version 2.32
400W is too high minimum limit for handcyclists. This limit should be removed or lowered significantly.
15 เมษายน 2560 | Version 2.32
Works great, until the IQ! screen comes up per the previous reviewer.
This is on Edge 1000 with latest firmware.
Needs to be more stable, then 5 stars!
14 มีนาคม 2560 | Version 2.3
If you touch the screen while display this a IQ! is displayed instead of the data field. And it won't come back to PowerGauge until you reboot the Edge820.
What does the numbers 0-5 stand for? Obviously it it not the powerZones as there are seven of them.
If these things are fixed I will change my rating to ⭐️⭐️⭐️⭐️⭐️
14 มีนาคม 2560, bjarnib
The numbers 0-5 represent the watt readout (x 100) I.e. 1 = 100w. Regarding the data field disappearing when touching the screen, please make sure you have the latest firmware installed. You may want to try uninstalling/reinstalling the data field.
13 พฤศจิกายน 2559 | Version 2.2
Cannot get this to work at all on the Edge 520. It displays the graph okay, but I don't get any reading when Im using it. Let me know how to fix this and not only would it get 5 stars but I would gladly donate for your work, cos it looks like it would be well worth the money, if it works.
23 ธันวาคม 2559, bjarnib
Please get in touch directly via the link on the page to get this working. Make sure your power meter is connected and working with your Edge device.
6 พฤศจิกายน 2559 | Version 2.2
the lap time doesnt work with workouts
23 ธันวาคม 2559, bjarnib
Please get in touch directly and provide further description, Note that the lap timer is only triggered via actual press of the lap button. The workout lap time is unfortunately not accessible from the developed app.
29 ตุลาคม 2559 | Version 2.1
Like this app but would be great if I could see cadence too. If you made the power and lap fields slightly smaller you should be able to fit in.
21 ตุลาคม 2559 | Version 2.1
Overall i find it a nice app but i thing there could be a couple improvements:
The power curve in the middle does tell you much. It creates a visual distraction at best.
It would be much better if you remove the curve and move power up and in its place. Then create another field between power and lap time, with the same format as power data field, where the user would select between hr, cadence and other data.
10 ตุลาคม 2559 | Version 2.0
Can't set Pwr in zones higher than 200W fix this any I'll change review to 5*
21 ตุลาคม 2559, bjarnib
Please note that power zones are set in percentages of FTP - not watts. So 100 corresponds to your FTP.
20 กันยายน 2559 | Version 2.0
- Color Zones are way off after changing FTP making this app useless.
- Zone 7 is undefined
- not possible to set Power to instant (only 3, 10, 30s)
- lack of custom datafields.
Overall nice app, I like it for recovery rides, but crappy effort & bugs. Fix it. A good idea would be to add a second pointer to the graph. One for instant power, the other one for 30s.
21 ตุลาคม 2559, bjarnib
Please note that power zones are set in percentages of FTP - not watts. So 100 corresponds to your FTP. Also you need to update your FTP in the app settings since Garmin unfortunately does not enable developer access to your FTP set in the User Power Settings. Please get in touch if you are aware of bugs or problems.