App Icon

Temperature

Description

GARMIN WARNING: This widget is intended only as a flight planning aid and is NOT for in-flight use and should NOT be used as a primary information source. The widget uses barometric altimeter data from the watch/device and it will not function properly in a pressurized environment and should not be used in a pressurized aircraft.</p><p></p><p>The Temperature widget is based *heavily* on Garmin built-in temperature widget (for the D2™ Bravo) but is designed to work with the Garmin tempe™.</p>

มีอะไรใหม่

Version 0.9.7</p><p> • added support for vivoactive 3</p><p> • added configurable display of fractional temperature</p><p></p><p>Version 0.9.6</p><p> • added support for displaying temperature from internal sensor (CIQ 2.1.x devices only)</p><p> • added support for D2 Charlie</p><p></p><p>Version 0.9.5</p><p> • changed colour of graph end pointer to white</p><p> • added support for Approach S60</p>

ข้อกำหนด

ฮาร์ดแวร์ที่ใช้คู่กัน

Get the Hardware

Additional Information

Permissions

This app requires access to:

  • Sensor data (i.e., ANT+, heart rate, compass)
  • ประวัติอัตราการเต้นของหัวใจ, บารอมิเตอร์, อุณหภูมิ และความสูง
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
Average Rating: (28 Ratings)

Ken Bostock
18 มิถุนายน 2562 | Version 0.9.9.1

Just added this to my watch. Curious to know what DALT and the number underneath mean?

Graham Runn
7 มิถุนายน 2562 | Version 0.9.9.1

Just what I have been looking for ! Works great with the Tempe sensor. Quick to connect good display and data.

Michael Klingberg
13 พฤษภาคม 2562 | Version 0.9.9.1

Pretty good on MARQ Expedition - thank you !!

Gerölltrampel
4 พฤษภาคม 2562 | Version 0.9.9

Design and function is really superb. In addition, the developer was very helpful when I contacted him. Thank you for your good work!

Test
30 เมษายน 2562 | Version 0.9.9

Good temperature app but it can not be set to negative offset.

การตอบกลับของผู้พัฒนา
30 เมษายน 2562, DouglasR

What you are experiencing is a problem with the Garmin Connect Mobile app; you cannot enter in a negative sign into the offset field until you've first entered a number. So to set an offset of "-1.4", first enter in "1.4" then put the negative in front of that.

Christian Tintore
17 เมษายน 2562 | Version 0.9.8

Su vivoactive 3 non funziona con sensore esterno tempe, mostra solo temperatura del sensore interno

Michael Brzeski
26 มีนาคม 2562 | Version 0.9.7-upd5

Ok

Christopher Lawley
4 ธันวาคม 2561 | Version 0.9.7-upd5

Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || Nice, clear display (except for "DALT". What on earth is "DALT"?) || Recommended || °C /°F chosen via Garmin Connect/Express

Steve Guluk
10 กันยายน 2561 | Version 0.9.7-upd5

How to set in Degrees rather than Celcius?

Labrie JS 🇨🇦
26 สิงหาคม 2561 | Version 0.9.7-upd5

Tempe device did not Working on vivoactive 3. Idea. Add additional line to include the min and max temperature

Tomasz
9 สิงหาคม 2561 | Version 0.9.7-upd5

I have a Garmin TEMPE but widget doesn't work with vivoactive3. It work only when you switch on other activity application.

Carsten Blankenburg
3 พฤษภาคม 2561 | Version 0.9.7-upd3

Bitte fügen Sie die Minimum und Maximum Werte hinzu. Vielleicht rechts und links neben dem aktuellen Wert. Was auch noch schön wäre, wenn man einstellen könnte, wann genau die App alle gespeicherten werte löscht. Wenn Sie das machen könnten, ist diese Anwendung für meine Trekkingtouren Perfekt. Vielen Dank und weiter so.

Jennertu
19 เมษายน 2561 | Version 0.9.7-upd3

hhh

Aleksandra Ivić 🥋 🇭🇷
26 มีนาคม 2561 | Version 0.9.7-upd3

Hi. I have VA3 and I also have Garmin Tempe. Tempe works fine with activities but I just can't make it work with this widget. Any suggestion?

การตอบกลับของผู้พัฒนา
26 มีนาคม 2561, DouglasR

Hi there. Please use the Contact Developer link so I can get more information and try to determine why this widget might not work properly with the vivoactive 3. Thanks!

Natxo Baile
11 กุมภาพันธ์ 2561 | Version 0.9.7-upd1

In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app

การตอบกลับของผู้พัฒนา
12 กุมภาพันธ์ 2561, DouglasR

Hi there. In order to get an accurate temperature reading, you need a Garmin TEMPE external sensor. The internal temperature is displayed when there is no external sensor connected.

Karl-Heinz Walter
30 ธันวาคม 2560 | Version 0.9.6-upd1

Funktioniert super mit der Fenix5. Synchronisation mit Tempe dauert ca. 5 sec. Zusätzlich zur Temperatur lasse ich mir die aktuelle Höhe anzeigen.

Pascual 1959
26 พฤศจิกายน 2560 | Version 0.9.6-upd1

Acabo de instalar en un fenix3 y no funciona.

การตอบกลับของผู้พัฒนา
27 พฤศจิกายน 2560, DouglasR

Hola. El widget requiere un sensor externo Garmin TEMPE para mostrar la temperatura en los dispositivos Fenix 3. *** Hi there. The widget requires a Garmin TEMPE external sensor in order to display the temperature on Fenix 3 devices.

Wilbur
1 พฤศจิกายน 2560 | Version 0.9.6-upd

Does not work with vivoactive 3. Temp reading is always between 27-31.

การตอบกลับของผู้พัฒนา
10 พฤศจิกายน 2560, DouglasR

Hi there. The temperature reading you are seeing is the watch "internal" temperature, which is affected by your body heat. To get an accurate reading you require a TEMPE external sensor from Garmin. Once you watch is connected to a TEMPE the "internal" indicator will disappear and the temperature reading from the TEMPE will be displayed.

Cloudjang
9 กันยายน 2560 | Version 0.9.6-upd

hope add temp point like 32.5℃

Mohamed Bel Haj Hassine
5 สิงหาคม 2560 | Version 0.9.5-upd

Don't work on F5X

การตอบกลับของผู้พัฒนา
9 สิงหาคม 2560, DouglasR

Hi there. As I mentioned in our email conversation, you must have the Garmin tempe external sensor for this to work as this widget is only designed to display the readings from the tempe sensor.

DS-Garmin
4 สิงหาคม 2560 | Version 0.9.5-upd

keine Anzeige bei Fenix 5x. Bitte noch einmal überprüfen und updaten.

การตอบกลับของผู้พัฒนา
9 สิงหาคม 2560, DouglasR

Hi there. As I mentioned in our email conversation, you must have the Garmin tempe external sensor for this to work as this widget does not read the internal temperature. Once you have the required tempe sensor the widget will work.

Ted S
25 มีนาคม 2560 | Version 0.9.3

It is very nice to see the temperature with the curved graph in addition to the numeric value. It would be better though to be able to configure the scale of the graph to at least have the range match that the external Tempe Sensor can measure. My Tempe will only read the temperature down to -20C and the specifications also indicate that this is the case so why have a graph go down to -40?

Alan
21 ธันวาคม 2559 | Version 0.9.1

Good looking Widget, works excellent with the Tempe, look forward to see more from this developer ... Thanks

Liviu Popa
30 พฤศจิกายน 2559 | Version 0.9.1

A very welcome graphical temp display (in comparison to the blunt text from the original temp widget). However, tempe has also the min/max values for the day. Would be nice to have 2 markers on the scale showing the min/max with some colours (blue/red) or simple indicators. Also, a third option for the bottom window should be the min/max temp values, after all it is a temperature widget, so I would like to have max info about temperatures :).

การตอบกลับของผู้พัฒนา
1 ธันวาคม 2559, DouglasR

Hi there and thanks for the feedback. Displaying the min/max is on my radar to do but unfortunately will require a lot more work as the widget would have to connect to the "tempe" directly instead of using the access through the watch. However, as I said, that is definitely on the list of things to add in the near future.

Denis Martin
26 พฤศจิกายน 2559 | Version 0.9.0

Looks great but it won't let me display my elev in meters. Tried multiple times, even powered on/off, un/re-installed... nope.

การตอบกลับของผู้พัฒนา
28 พฤศจิกายน 2559, DouglasR

Hi there. The version you installed (the first release) did not display elevation; it only displayed *density altitude* (which is basically elevation corrected for temperature and pressure) because the widget was originally designed for pilots. The new version (0.9.1) now allows you to display the elevation or density altitude. You can configure both versions of the widget to use metres or feet using GCM or Garmin Express.

Sorry, no statistics available yet.