App Icon

Xert Workout Player


Getting started guide:</p><p></p><p>The Xert Workout Player plays Xert's unique Smart Workouts. Using Garmin Connect Mobile, the Xert Player logs in to Xert Online (, obtains your latest Fitness Signature, downloads your selected workout, configures the exact workout interval intensities and durations specific to you and then plays the workout using your power meter and/or smart trainer. With your smart trainer, it will do trainer control. If you have both a power meter and smart trainer, it will do powermatch and trainer calibration on-the-fly. Playing Smart Intervals, it will auto-adjust interval power and duration, reducing/increasing intensity and slowing/accelerating the timer depending on how an interval is executed in real-time. Easily adjust target power or trainer resistance with swipes / up-down clicks. It will learn your cadence preferences and provide indication of when you're pedaling too fast or too slow. The app also sends telemetry back to Xert Online so you can view your data online via the Xert Remote Player ( and follow your workout progress. </p>


Xert Workout Player wins Best Connect IQ App Award for 2017 and 2019!</p><p></p><p>Version 3.3 brings exciting new features that enable greater variety in your workouts including ramps, slope-mode (mixed-mode) and smart, dynamic power intervals based on target MPA that adjust their target power based on your fatigue at the moment. Super cool. </p><p>This version also brings support for the Edge 1030 plus.

Ytterligare information


Den här appen måste ha åtkomst till:

  • Skicka och ta emot data via ANT-radio till och från tredjepartssensorer
  • Skicka/ta emot information till/från internet
  • FIT-filer (aktivitetsinspelningar)
  • Registrera ytterligare information i aktivitetsfiler
  • GPS-plats
  • Sensordata (d.v.s. ANT+, puls, kompass)
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
Medelbetyg: (44 betyg)

Robert Corry
den 23 december 2020 | Version 3.3

I installed the App on an Edge 1030 Plus. Couldn’t initiate the App, kept getting an Unknown Error when Authorising it. Contacted Support, they were very helpful, they advised to try logging in with WiFi disabled on the Edge. The App then logged in correctly. Haven’t tried using it yet, wanted to post the above for the benefit of others trying to get the App installed.

Bart Bloomquist
den 26 juni 2020 | Version 3.2

How come its not available for the Edge 1030 plus?

Svar från utvecklaren
den 27 juni 2020, Xert-BaronBiosystems

Hi Bart, Garmin is investigating. Hope to see the liisye resolved shortly.

den 26 juni 2020 | Version 3.2

Flawless for me on my 530. Indoors use. This a very high quality, feature packed app in par with the built in Garmin software. Beautiful, functional, useful, can even do powermatch and broadcast to the remote player! I can now free my phone and get rid of the ant+ dongles. Nice touch, it adds extra information on the fit file that goes to garmin connect. Excellent!

Alexander Liffers
den 20 juni 2020 | Version 3.2

The player works a treat, although I always struggle to keep the power in the green zone while cycling outdoors, but hey I'm new to this. The problem, however, is after using the workout player, the next time I turn on 530 to just use the normal built-in activities I find that all the sensors I have registered are disabled and I need to individually enable them all again. Not just power/speed/hrm, but all the others like lights. Somewhat related, is Xert at looking to integrate with Garmins workout API to push workouts that way, rather than a dedicated app, or possibly making the workout player a field? At least for users that are using it outdoors and don't need it to control trainers.

Alessandro Busetto
den 2 maj 2020 | Version 3.1

Hi, I have installed version 3.1 on a Garmin Edge 820 and there are various issues. 1. Cannot access the app menu 2. Cannot exit the app once opened 3. App freezes when discarding an activity Pairing with trainer is ok, but given the above issues the app is unsable. Please help! Thank you

Svar från utvecklaren
den 2 maj 2020, Xert-BaronBiosystems

Hi, Kindly send support requests to our support group: [email protected] Thank you.

Michał Szaliński
den 28 mars 2020 | Version 2.08

All is good and really improvig, however it does not save GPS data when doing workout outdoors. Garmin Edge 530

Svar från utvecklaren
den 6 april 2020, Xert-BaronBiosystems

You can enable GPS in the app!

den 7 mars 2020 | Version 2.08

I installed it and set as instructed, but when I went to discard workout, Edge 1030 froze on on this page and nothing else helped, than holding power button to perform hard reset. This happened 4 out 5 cases when. Set up for powermatch with pedals as instructed. I dont have any other installed apps and no datafield, that could cause conflict

Graham Turner
den 4 mars 2020 | Version 2.08

Installed and signed up but after authentication and returning to device there is just a small error picture and so doesn't work, not sure what's going wrong.

Svar från utvecklaren
den 5 mars 2020, Xert-BaronBiosystems

Hi Graham. You can try and disable wifi. There are known issues with Garmin devices. If that doesn't work, get help with our support team at [email protected]

Mårten Larsson
den 6 januari 2020 | Version 2.08

Great app EXCEPT Evert other time I try to start the app on my Edge 1030 the app refuses to login. Most of the time it works after a reboot but sometimes it takes 10-15 minutes just to get going.

Svar från utvecklaren
den 6 januari 2020, Xert-BaronBiosystems

The app relies on connectivity to the Xert server through your Garmin Connect Mobile interface. If the Garmin isn't connected to Garmin Connect Mobile, the app is not able to login. Ensure your Garmin is connected to Garmin Connect Mobile and your phone is connected to the Internet prior to starting the app. It will work 100% of the time if there is proper communication to the server.

den 2 januari 2020 | Version 2.08

Excellent, there is a learning curve in to it but it is wonderful app once you figure it out.

Mohammad Faisal Bin Abdul Ghani
den 11 november 2019 | Version 2.08

Love it!

den 31 oktober 2019 | Version 2.08

Tengo continuas desconexiones con el teléfono desde mi edge 520 plus cuando quiero usar el remote player en el pc. He probado a reinstalar la aplicación y connect mobile pero sigue igual.

Svar från utvecklaren
den 6 januari 2020, Xert-BaronBiosystems

You should remove all datafields (except for Xert datafields) on your Garmin since some interfere with running apps.

Henry Tambor
den 28 september 2019 | Version 2.08

The Xert workout player is innovative software. There is a learning curve to the Xert approach to power metrics, so don't expect to use this software intuitively. Spend some time getting to know their system and you will find that this is great software.

Lok Chai
den 26 augusti 2019 | Version 2.08

Xert is adaptive. Just follow the Advisor whenever you want to workout. This app is great for indoor and outdoor rides. The premium monthly plan is 9.99 so... just cost you a few beers to try and you get the added benefits of weight loss.

den 25 juli 2019 | Version 2.08

Top! Just invest some time to figure out Xert.

den 2 juli 2019 | Version 2.08

...geht überhaupt nicht, lässt sich nicht synchronisieren, immer dieser Ärger mit den unvollkommenen Apps :(

Svar från utvecklaren
den 2 juli 2019, Xert-BaronBiosystems

It works perfectly when configured properly. Contact support and we can help you.

DONNAY Jean Francois
den 21 februari 2019 | Version 2.07

Well’really great, when Work , (1 Time by month )

Svar från utvecklaren
den 21 februari 2019, Xert-BaronBiosystems

Hi Jean Francois. Contact support at email address [email protected] for help in using the software. It works every time when you follow the correct steps. Thank you.

DONNAY Jean Francois
den 29 januari 2019 | Version 2.05

Really great but....why so small characters? impossible to read on the bike. What a pity :-(

Jon Bekenstein
den 28 december 2018 | Version 2.05

Fantastic workout player on the Edge 1000. The XERT workouts have helped me improve my FTP by more than 20% last year. But the power button broke on my 1000 and I have switched to the Edge 1030. Unfortunately, some (apparently not all) of the Edge 1030 devices freeze/stall with the workout player, and mine is one of them. I have 3 bikes with 3 different power meters and the problem occurs with all 3. Developer is working with me to trouble shoot. My old 1000 still works great indoors and outside (I use a paper clip to turn it on/off) with the XERT workout player. There seems to be some connectivity issue between the 1030 and the IQ Connect servers. The player freezes after an elapsed time reaches any number that ends __9:59. It restarts with reconnecting, but you will miss the intervals changing when it is stalled. I will update when this is resolved. I am using Public Beta 6.46 firmware. Same thing happened with the official 6.30 firmware. UPDATE: It turns out that using XERT workout player with Stanislav Bures' My Edge2 on the device causes the problem. Both data fields use Background Services, and maybe My Edge2 uses Background services even when it is only loaded and not just when it is running. Maybe Stanislav can fix that. All is great in the universe of XERT, though I also like My Edge2.

Justas Mažuolis
den 10 december 2018 | Version 2.05

I have edge 820, started the smart workout - "Hot blooded-2" and after few minutes it freezes the display. you can pause workout or select trainer menu, but in the main workout window all data some king stopped and did not change. i dont know what to do, tried reinstall app several times. :(

Svar från utvecklaren
den 10 december 2018, Xert-BaronBiosystems

If you're not using a power meter for powermatch, configure the trainer on the Garmin sensors menu. If the Garmin works with your trainer natively, it should also work without issue in the app.

Roland Philipp
den 24 oktober 2018 | Version 2.05

Love the app. Used it with my Edge 1000 without any problems. However, I switched to Edge 1030 and the app keeps freezing after a few minutes. Same problem after re-starting the app or the unit and also after re-installing the app.

Svar från utvecklaren
den 24 oktober 2018, Xert-BaronBiosystems

Hi Roland, Kindly send an email to our support group at [email protected] with some details (username, workout you are using) and we can help troubleshoot. Cheers.

Steve Waterhouse
den 3 september 2018 | Version 2.03

Great info but Images and #'s are way too small for use while riding outside.

den 7 augusti 2018 | Version 1.81

Trying this out, seems like it has a bug with the Edge 1030 at least where it doesn't save the GPS data when one is done. On the forums this was mentioned as a possibility, and I have now verified by doing a few attempts. This results in missing data on Xert, let alone connect/strava, etc. Still trying to track down more info on this.

Svar från utvecklaren
den 20 augusti 2018, Xert-BaronBiosystems

This has been determined to be a firmware issue that is being looked at by Garmin. We hope to see it addressed in a subsequent firmware release.

den 7 juni 2018 | Version 1.81

I do not have a power meter and my trainer is "dumb". I tried to input figures in the Resistance submenu on my Edge 520 to have Xert calculate watts from speed/cadence/resistance in the same way that Zwift does. However, clicking on Resistance takes me back to the main screen. Is that to be expected? Does Xert not produce derived watts?

Svar från utvecklaren
den 8 juni 2018, Xert-BaronBiosystems

The player currently only supports devices with real power data - smart trainers and power meters.

Javier Carrion
den 31 maj 2018 | Version 1.81

No funciona de buena manera en Garmin 1030 Al guardar los datos no muestra velocidad, distancia y metros ascendidos.

Svar från utvecklaren
den 1 juni 2018, Xert-BaronBiosystems

Garmin is aware of this issue with the 1030. We hope to resolve it shortly.

Det finns tyvärr ingen statistik tillgänglig ännu.