App Icon

IQ Map Receiver (Waypoints and Tracks)

Beskrivning

*** starting with connect IQ 4.22.x local Bluetooth communication is reenabled by Garmin, please update your Apps</p><p></p><p>A Tool to send Waypoints, Tracks (Courses), Locations and Segments from mobile phone mapping application (Google maps or OSMAnd+) and GPX files to Garmin Fitness device over Bluetooth </p><p></p><p>!! No Internet required for Track Upload !!</p><p></p><p>-- general hint: Start Button is for Waypoint transmission control, menu button is for track transmission control --</p>

Nyheter

2.4.9 Add support for the MARQ™ Adventurer and MARQ™ Commander</p><p>2.4.8 support for the Fenix 6, venu and captainmarvel/firstavenger devices</p><p>2.4.7 Garmin reenabled support for local Bluetooth communication with Connect App 4.22.x, switch from localhost to 127.0.0.1 IP</p><p>2.4.6 full support of edge 830/530 WiFi always on mode (NEW! setup in Garmin Connect), edge 520/530 button mapped</p>

Krav

Companion App

Android App on Google Play

Ytterligare information

Behörigheter

Den här appen måste ha åtkomst till:

  • Skicka/ta emot information till/från internet
  • Sparad information till exempel banor, rutter, waypoints, spår eller träningspass
  • Skriv platser till en enhets platslista
  • GPS-plats
  • Approach® S60 Approach® S60
  • Captain Marvel Captain Marvel
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore Edge® Explore
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • epix™ epix™
  • First Avenger First Avenger
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Venu Venu
Medelbetyg: (84 betyg)

Grzegorz1975
den 31 juli 2019 | Version 2.4.6

Fenix 3, version 2.4.6 of IQ MAP receiver. While trying to transmit waypoints the app switches the watch off and it restarts Phone app gives the message that transmission was succesful, still no waypoints downloaded to the watch.

Sergiosulaco
den 25 juli 2019 | Version 2.4.6

I can upload manual wp, but can't upload GPX file. I need help to setup fit server path. No idea what i have to do. Garmin connect 4.21( i can't install 4.19.1) and garmin fenix 5 thanks!

Balazs Szogi
den 19 maj 2019 | Version 2.4.5

Great app, however when using the course upload function, tutn by turn navigation is not working (although it does when using Garmin Connect for the same purpose). Any suggestions?

Svar från utvecklaren
den 19 maj 2019, schlupp73

Hi Balazs, Well the data for turn by turn navigation of to be taken from somewhere. I only support the route data when you create a track with OSMand. You can enable the support in the settings. I do not use additional commercial routing services. Kinds

Daniel Feuerstein
den 11 maj 2019 | Version 2.4.5

Good app, but i can't bring a track to my fenix 3hr. If I share a route in osmand with iq the app does not find my watch. waypoints are working.

Svar från utvecklaren
den 12 maj 2019, schlupp73

Hi Daniel, I'm sorry. Track transfer is not supported by the older Fenix 3 device. Required features are only available in Fenix 5 devices or newer. Kinds

Gabi D
den 23 april 2019 | Version 2.4.3b

I test it a few month ago with my fenix 3 and it worked fine. After the latest update I couldn't sync waypoints to my fenix 3. I hope you will fix it soon.

Svar från utvecklaren
den 24 april 2019, schlupp73

fixed. as you see in the change notes, the rights management of Garmin changed so the older API was not usable any longer. should work fine now. please leave a note if you mind for some feedback.

Zbigniew
den 13 april 2019 | Version 2.4.2b

Works very well. Helps a lot with fast uploading of locations

Keith Williams
den 26 januari 2019 | Version 2.4.2b

Love this app on my Fenix 5 Plus. Wish I could install it on my Edge Explore cycle computer.

Svar från utvecklaren
den 24 april 2019, schlupp73

latest versions do support the edge devices now. please have a look and leave some comments. Kinds

Luca
den 30 december 2018 | Version 2.4.2b

have a fenix 5. managed to load waypoint from google map fine. did not managed to download a gpx file unfortunately. need detailed help to do so. moreover, since goggle mail do not support gpx generation, how can i create a gpx file from the mobile (instead of using other pc based systems?) thanks if you can reply luca

Svar från utvecklaren
den 24 april 2019, schlupp73

Hi Luca, to sum up for all here. I would use OSMAnd+ from the play store in Android to create gpx files for Waypoints or tracks (no need to buy anything or reinvent the wheel). you can directly share from OSMand application to IQ Mapreceeiver, and no internet is required when sufficient maps are installed. Kinds

Nuno Pinto
den 4 november 2018 | Version 2.4.2b

It works for way points so I am happy, however I can't find instructions for all the features

Kroezcontrol
den 10 september 2018 | Version 2.4.2b

This app will also be very nice for some edge devices, like the 520m

Svar från utvecklaren
den 24 april 2019, schlupp73

Hi Kroezcontrol, should be supported now.

Cowboyzer
den 24 augusti 2018 | Version 2.4.2b

App intelligente peccato non sia possibile inserire coordinate UTM.

Lloyd Edwards
den 29 april 2018 | Version 2.4.1

This app has potential but i cant get it to work. All I want to do is download a gpx file to my mobile then send it to my Garmin Fenix 5.. i didnt think it would be this hard! This app works on waypoints but every gpx file gives me the following error message (gpx conversion ok...but timestamp overwritted from source switch auto calculation off?). There are quite a few setting options and not sure exactly what they all do. Not to sure what 'Fit Server' ? When should i check box 'Waypoint and App/Widget? Any advise kindly welcomed. Thanks

Svar från utvecklaren
den 29 april 2018, schlupp73

Hi Lloyd. Very good. You didi the first step and impprted a gpx file, the tool added timestamp data. Next step is to start the Fenix iqmapreceiver app or widget, press the menu button, select IQReceiver and request for e.g. the last imported track. A track can only requested from a watch, it can not be send from a phone instead. You can contact me directly when you have further questions.

Albert
den 19 mars 2018 | Version 2.4.1

Funciona molt bé en l'Epix , però només per enviar WP, no sé enviar una ruta sencera important-la d'un GPX. Sinó donaria les 5 estrelles

Svar från utvecklaren
den 19 mars 2018, schlupp73

Hello Albert. Thx. I target to use the garmin features on the devices to use the full mapping from osm. Route transfer needs support that is only provided by the new Connect IQ 2.x devices (e.g. fenix5). Sorry

Christophe Emery
den 17 januari 2018 | Version 2.3.2-upd1

Installed both Apps (Android & Garmin) easily then imported a GPX File with Waypoints inside (Android Manner). 2 + Begin & End Waypoints dicovered and then uploaded through BT to #fenix3. Only the Elevation is missing. GREAT Tools and at least something usable to upload Waypoints without Cable or Wifi.

LemoNidas
den 11 januari 2018 | Version 2.3.2-upd1

Garmin Fenix 3 with Google maps on androind combo works great.

Patrik Lindgren
den 30 december 2017 | Version 2.3.2-upd1

Does not work on Fenix 3

Svar från utvecklaren
den 24 april 2019, schlupp73

should work fine. do you have any issues?

TT
den 7 december 2017 | Version 2.3.2-upd1

Does not work on Fenix 3 HR with Nexus 6P 8.0

Svar från utvecklaren
den 24 april 2019, schlupp73

should work fine. do you still have any issues?

Artur Kub
den 2 november 2017 | Version 2.3.2-upd

When ios application?

Svar från utvecklaren
den 24 april 2019, schlupp73

i´m not a Mac user, sorry.

asamartino
den 18 oktober 2017 | Version 2.3.2-upd

Do not work for Quatix 3? Will it work

Svar från utvecklaren
den 24 april 2019, schlupp73

the Quatix comparable to the Fenix 3 series should work fine. please use the latest version

wissler
den 14 oktober 2017 | Version 2.3.2-upd

Super appli ! A ce jour c'est la seule app qui permet de transférer des tracks et waypoints du téléphone mobile vers la montre Garmin, sans avoir besoin d'une connexion internet.

Sharon
den 9 oktober 2017 | Version 2.3.2-upd

I've been searching for apps that would send coordinate of any location I found on Google Map to my new Garmin Femix 5X and this is the only app that seems to be able to do exactly what I want. I installed it last night and at first it does seem to work when I shared to location found on Google Map to IQMapReceiver. It only fired up to screen with empty fields of location name, longitude and latitude for me to fill in. After tweaking the setting a bit (enable Internet access and MPRS ) it did automatically populate those fields when I shared a location from Gmap. However, the values of longitude and latitude it entered does not match those of the location I just shared. Bugs?

Nico G
den 28 juli 2017 | Version 2.3.2-upd

Works fine on fenix 3 / companion apps for waypoint but i'm not able to import gpx / fit track. Fit server is enable, but il always a null waypoint instead off track. What is the exact procedure to send gpx / fit file to fenix 3 ? does it work ?

maggotbnr
den 28 maj 2017 | Version 2.3.1

no funciona en mi fenix 3 desde la ultima actualizacion

Svar från utvecklaren
den 24 april 2019, schlupp73

should work fine. please use the latest version

Andrew Kong
den 27 maj 2017 | Version 2.3.1

Does not work on Fenix 3 HR with LG V20

Svar från utvecklaren
den 24 april 2019, schlupp73

should work fine now, please update to the latest version

AgentClepp
den 26 maj 2017 | Version 2.3.1

The new track-up-load frature works fine on fenix 5s!

Det finns tyvärr ingen statistik tillgänglig ännu.