App Icon

Running Power

Opis

This app displays your current running power. If you are new to training with running power, try this one first.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garmin devices to calculate and show your running power in real time — as well as after your run.</p>

Novosti

Changes made from version 1.50 to 1.60:</p><p>- Updated compatible devices</p><p></p><p>Changes made from version 1.40 to 1.50:</p><p>- Support for the Forerunner 945 and the MARQ collection</p><p></p><p>Changes made from version 1.30 to 1.40:</p><p>- Fix bug where wind power was always disabled</p><p></p><p>Changes made from version 1.20 to 1.30:</p><p>- Support for the fenix5/5s/5x Plus series</p>

Dodatne informacije

Dovoljenja

Program potrebuje dostop do:

  • Pošiljajte podatke senzorjem drugih proizvajalcev in jih prejemajte od njih s programom ANT Radio
  • Program naj deluje v ozadju, ko ni aktiven (vpliva lahko na avtonomijo baterije)
  • Pošiljanje/prejemanje informacij v internet/iz interneta
  • Beležite dodatne informacije v datoteke dejavnosti
  • Lokacija GPS
  • Srčni utrip, barometer, temperatura in zgodovina nadmorske višine
  • Vaš vadbeni profil v storitvi Garmin Connect™
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
Povprečna ocena: (57 ocen)

Denis Verner
21. maj 2019 | Različica 1.60

Average power is gone since new update.

Frank Groenewoud
19. maj 2019 | Različica 1.60

Not working as expected on the 945. Data on Garmin connect shows only some spikes

Edgar Montalvo Escamilla
15. maj 2019 | Različica 1.60

It's working, however when using training peaks, it does not show the power on the gauge.

javier1153
04. april 2019 | Različica 1.40

¿Como podría calcular las zonas de trabajo de potencia?

Keithshu
29. marec 2019 | Različica 1.40

I can't read the power data in Garmin Connect after ran with forerunner 935.is it required wearing running pod in order to able to read the data?

MaBoMaBo
24. marec 2019 | Različica 1.40

+30% overstated measurements vs Stryd. Stryd matches Garmin's vo2max...

Daniel Göthberg
22. marec 2019 | Različica 1.40

Have you any others that have cope with the problem that the running power (Garmin Lab) stopped working mid March for Garmin 935 watch. It have been working until recently, it just stopped and now I can´t see the power anymore when I am out running.

Edward Wong
13. marec 2019 | Različica 1.40

never show any data no matter in my Fenix 5 nor Garmin Connet App

Dejan Bogdanovic
03. marec 2019 | Različica 1.40

Today no avg and graphs at garmin connect? Fenix 5 and 935, both. During activity shows data field ok.

Piero Cosimo
27. februar 2019 | Različica 1.40

the power data as it is is unusable. it also varies too much to constant efforts in plan. you should be able to set the interval to 3" 5"

Benjamin
26. februar 2019 | Različica 1.40

Perfect Datafield :)

Hanspeter Berger
12. februar 2019 | Različica 1.40

it works accurate...cool :-)

christian de marco zompit
07. februar 2019 | Različica 1.40

seems to work good!!

Andrew Lind
01. februar 2019 | Različica 1.40

Me too, MarekU!!! No Running power on garmin connect. I can see the power when I view the activity on the runalyse website though so it is being saved away

Carlos Simon
01. februar 2019 | Različica 1.40

Me too, MarekU!!!

MarekU
31. januar 2019 | Različica 1.40

Don't see any Power graph in Garmin Connect after synchronizing my running data (Garmin 935). I installed the application and can configure zones & all other parameters. It shows the current Power meter data while running. Anyone having the same problem with version 1.40.

Sergio
11. januar 2019 | Različica 1.40

I don't know why but since the last update my power data low alot. For example, on December 2018, runing at 5:38 give me 310 Avg Running Power, on January 2019 running at 5:29 give me 77 Avg Running Power!!!!!!!!!!!!!!!

Fran
10. januar 2019 | Različica 1.40

Good application, but it's the same as Juan Maria Jimenez that in the intervals doesn t calculate the average of the Watts.

Pablo de las Heras
13. december 2018 | Različica 1.30

As Juan Maria Jiménez said on December 4th, I have de same problem with my Fenix 5. If you need it, I can send you pictures of this problem. I imagine this is a software mistake but if only it was solved as soon as possible. If it wasn't for this problem, I would give 6 stars without doubt.

Juan Maria Jimenez
04. december 2018 | Različica 1.30

Good morning, There is a problem with the Garmin Labs applications with the watts in Garmin and it is the following. when I do series, with LAPS, when I look at the summary, it does not take out the average watts of the LAP ... In the graph I'm going to 450 watts, but then the average of the series comes out at 380 watts. It would be fine, that this ruling will be solved. Understand the problem. If you leave me an email I would send the images.

Ikkal
04. december 2018 | Različica 1.30

Not working on fenix 5x plus. Disappointing..

Sotiris Diamantopoulos
02. december 2018 | Različica 1.30

Please provide an option to smooth values. In its current implementation, running power is only useful as a post-exercise tool. Trying to use it in real time, as I run, power values are fluctuating too much to be of any use. Essentially, I am trying to smooth the values myself, averaging the last 3 seconds, which is the last thing a runner needs to do while running or racing. An option to smooth values with a variable smoothing window (e.g. 3-10s) would render this datafield much more useful.

Ralph
30. november 2018 | Različica 1.30

I really do like to have the running with Power option on Garmin. Unfortunately very little is published and google only finds over and over the same reviews .... I read a lot about running on power on: https://thesecretofrunning.com/wp-content/uploads/2018/01/31-Second-test-of-Garmin.pdf and their theory is very solid. They can exactly calculate the power numbers and confirm stryd values. Your numbers seem to follow a different approach and the watts are approx 30% higher. I would appreciate if you can add a config option to select which power model to follow. This would allow to follow training plans designed for the power ranges displayed by stryd. Thanks for a brief answer and considering for an update release ! Would be nice to have for the spring training season ;)

Krzysiek
21. november 2018 | Različica 1.30

Good app! Just one question - need some guidance on setting the zones. Can anbody help? ☺

RafaelMonge
05. november 2018 | Različica 1.30

Hello good day I write to you in relation to the "app running power" I would like to train with the power parameter while I run, but currently it is not possible to set up training with power. I give an example done with trainingpeaks: Workout Details Warm up 2.00 km @ 277-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Active 3.00 km @ 415-454 W Zone 4 - Threshold-Zone 5 - High Intensity Recovery 1.50 km @ 296-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Cool Down 1.00 km @ 198-237 W Zone 1 - Recovery / Walking Is there any way for fenix 5 to warn me that I am within the correct range of power at each step?

Statistika še ni na voljo.