Simple widget displaying the current atmospheric (ambient) pressure in mm.Hg./mb/hPa/kPa/inHg and altitude (in meters/feet, depends on system settings). Original Garmin barometer widget displays the barometric pressure only. There is no way to display the "raw" (unadjusted) atmospheric pressure on the device except by adding it as a datafield in an activity. This widget displays the atmospheric pressure without having to start an activity.</p>
1.9.5 - new devices</p><p>1.9.3 - new devices, cosmetic improvements in glances</p><p>1.9.2 - translations fix</p><p>1.9.1 - SDK 3.1.9, glances support added, known issue: translations</p><p>1.6.8 - hPa units added, minor fixes</p><p>1.6.7 - SDK 3.1.7</p><p>1.6.6 - SDK 3.1.6, new devices, exit widget fix</p><p>1.6.2 - SDK 3.1.3 (fix), fenix 6, Gpsmap 86, venu, vivoactive 4/4s</p><p>1.5.2 - SDK 3.0.11, Edge 530/830, Forerunner 945</p>
Program potrebuje dostop do:
ROBERTS
09. januar 2021 | Različica 1.9.5
Björn Fröderberg
29. december 2020 | Različica 1.9.5
Great widget. Works perfect for me and my needs :) Wonder if it would be easy to create a variant as a "Data field" as well?
Deiv
20. december 2020 | Različica 1.9.5
Dorin Boca
05. november 2020 | Različica 1.9.5
Can you add a GRAPH? It would be great to track the pressure, not only to see the raw value. Thx!
Andrew
20. oktober 2020 | Različica 1.9.3
Хороший виджет. А если бы вы еще и с температурой объединили бы, чтобы два слота в часах не занимал, был бы вообще идеальным.)
Bernd Hafen
08. oktober 2020 | Različica 1.9.3
Das Widget funktioniert sehr gut auf der Venu. Aber wie wird die Höhe kalibriert ? Über GPS ? Und wenn ja, wird die Höhe ständig per GPS aktualisiert ? In welchem Intervall ? Vielen Dank.
Odgovor razvijalca
08. oktober 2020, Navicom
Altitude calibration on your device can be performed using the manual: https://support.garmin.com/en-ZA/?faq=TBpNa6wJf2AbZK4Jgb99E6 Remember, GPS altitude basement is not so precise as manual enter/DEM (that is not possible on your device, please do not expect all fenix features on it). 3rd party developers have no access to calibration menu so 4 stars are 4 stars only and we cannot help you, sorry again.
David
27. avgust 2020 | Različica 1.9.2
Great app! One question: the watch measures ambient pressure directly and then using altitude determined from GPS signal calculates MSL? I was checking it as a tropical low pressure storm came through and the ambient pressure was dropping (in blue), altitude rising, and MSL (small number at bottom) staying constant. This despite me not going anywhere. Seems like ambient and baro pressures should have been dropping and altitude remained constant. Just trying to understand how this works. Thanks!
Odgovor razvijalca
08. oktober 2020, Navicom
All values readings come from Garmin SDK. We really do not know how Garmin algorithms work inside and what are the values provided in your particular case. Ask them if you are really interested in. Also there are some settings that can affect the result: like constant altitude, constant pressure, automatic detection. Exception was on fenix 3 family: device SDK can provide only altitude and MSL pressure, no direct reading from pressure sensor available, so we calculated ambient pressure using the formula and the temperature.
Dzidu79
01. julij 2020 | Različica 1.9.2
Dzidu79
13. maj 2020 | Različica 1.6.8
would it be possible for the pressure value to be visible without entering the widget?
nmozheyko
26. april 2020 | Različica 1.6.8
Не показывает данные, только синий прямоугольник на экране и нет передачи данных на циферблат! Часы Vivoactive3
Odgovor razvijalca
28. april 2020, Navicom
Воспользуйтесь пожалуйста ссылкой https://apps.garmin.com/en-US/apps/00678298-6672-4228-9c82-c9aa00e43df0/contactdeveloper для обратной связи. Укажите вашу почту, пришлите файл с часов garmindevice.xml. Что-то поменялось у Garmin в прошивках, надо разбираться, раньше всё работало.
Юрий
23. marec 2020 | Različica 1.6.8
Стал показывать на 1кПа меньше, чем на самом деле. С несколькими приборами сверял, в т.ч. с повереным.
Ben
21. marec 2020 | Različica 1.6.8
Works great with 920XT, but what’s the number underneath the altitude?
GotthamAlphaKwesta
20. marec 2020 | Različica 1.6.8
Mohsen
19. marec 2020 | Različica 1.6.8
Very nice widget. Please also add the air pressure chart. For example the last few hours
Dzidu79
18. marec 2020 | Različica 1.6.8
Dzidu79
18. marec 2020 | Različica 1.6.7
Michał
15. marec 2020 | Različica 1.6.7
No hPa junit, impossible to set default junit. Works a little slow on AV4.
Angelika
13. marec 2020 | Različica 1.6.7
Подскажите, пожалуйста, что означает третья цифра? Первая - атм. давление, вторая - высота над уровнем моря, а третья? Спасибо за виджет!
FC. JAVIER DE LA FUENTE GONZALEZ
06. marec 2020 | Različica 1.6.7
Mohsen
03. marec 2020 | Različica 1.6.7
Kanchai Yafan
18. februar 2020 | Različica 1.6.7
Not work my vivo active3 music not accurate pressure.
Odgovor razvijalca
18. februar 2020, Navicom
Sorry about that. Your device is not fenix. Do not expect from it extremely precision. Developers only read from Connect IQ platform the values the device provides. You can try to calibrate altimeter using the manual https://support.garmin.com/en-US/?faq=FmE1UxYdn56rYdmThGbO06
Oleksandr Vorovchenko
26. januar 2020 | Različica 1.6.6
Doesn't work on my FR945. My watch rebooted after the install. It was shown as installed in GC, but was absent in the watch. I've tried to reinstall it, but with no luck. Update: After an hour or so .
Odgovor razvijalca
26. januar 2020, Navicom
Please make sure you have updated firmware on your device via Garmin Express. Also sync with Garmin Connect installs. It will appear in widgets carousel. (Press UP/DOWN buttons few times until you find the widget). Write us about your situation: https://apps.garmin.com/en-US/apps/00678298-6672-4228-9c82-c9aa00e43df0/contactdeveloper
Xavier-Alexandre BILLARD
28. december 2019 | Različica 1.6.6
HappyUnicorn
20. december 2019 | Različica 1.6.6
Statistika še ni na voljo.