App Icon



My grandpa was watchmaker and I am programmer and runner ;) ...This is analog watch face with five hands displaying some useful data like Sunrise/Sunset*, current phase of the Moon, altitude, daily steps and their progress towards the goal, 7-days history chart, burned or active calories, walked distance, heart rate**, etc. Highly configurable***.</p><p></p><p>(*) For Sunrise/Sunset computation the last known GPS position is used. If nothing is displayed, you have to fetch the current satellite data via any of the activity apps which uses GPS.</p>

Čo je nové

IMPORTANT: This watch face is FREE, but its development took me a lot of hours and I'm still trying to make it better (there were more than 96 upgrades until now :). Therefore, if you like it and use it regularly - please make a small donation to my PayPal account: (anything of a price of coffee would be highly appreciated ;) Thanks!</p><p></p><p>v7.08 (requested feature):</p>

Ďalšie informácie


Táto aplikácia vyžaduje prístup k:

  • polohe GPS.
  • História srdcového tepu, barometra, teploty a nadmorskej výšky
  • Športový profil aplikácie Garmin Connect™
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • vívoactive® 3 vívoactive® 3
Priemerné hodnotenie: (počet hodnotení: 582)

Nedeľa, 2019, júna 16 | Verzia 7.08

Great Watch Face. Question: when displaying dual time instead of moon, how is the time zone to be configured?

martinez fabrice
Piatok, 2019, júna 14 | Verzia 7.08

Très bonne face watch mais pour moi il manque il y a possibilité de mettre les pulsations cardiaques en continu et réactualiser en temps réel pensez-vous pouvoir modifier ce paramètre bravo encore

Brian Usher
Streda, 2019, júna 5 | Verzia 7.07.0

I really like this watch face and it has all of the features that I was looking for on an analog face. I am having trouble however getting anything to display on the lower face. It does not seem to be displaying anything related to sunrise sunset. Both fields show as -- --. Any insight would be appreciated!

Odpoveď vývojára
Štvrtok, 2019, júna 6, mbell-SVK

For sunrise/sunset times computation you must fetch the GPS signal at first (your position is needed). Please, read the instructions.

Utorok, 2019, júna 4 | Verzia 7.07.0

Bellissimo quadrante....

Pondelok, 2019, júna 3 | Verzia 7.07.0

Everything's fine but on my tactix Charlie I couldn't turn on the second hand on watchface

Odpoveď vývojára
Pondelok, 2019, júna 3, mbell-SVK

This watch face doesn't have permanent second hand, it works only in full power mode (small hand in the upper dial is transformed into the second hand for 10s each time you look at your watch, if it is activated).

Pondelok, 2019, júna 3 | Verzia 7.07.0

Hi. A single doubt. Since I installed it in the sphere on the left, put what I put in the options, I only get the text "missing history" .... What is the problem? Thank you

Odpoveď vývojára
Pondelok, 2019, júna 3, mbell-SVK

Obviously, missing history is the problem. ;) You have to wear your watch with enabled activity tracking for 7 days at least (have you just bought your watch, isn't it new?).

Colby Pacheco
Sobota, 2019, júna 1 | Verzia 7.07.0

I downloaded this watch face and really like it. I customized the data shown. Now the data has gone back to the default data after a few hours. What am I missing?

Odpoveď vývojára
Pondelok, 2019, júna 3, mbell-SVK

I cannot tell you from what you have written. Please, contact me via "contact developer" so I can help you.

Trevor Tremaine
Sobota, 2019, júna 1 | Verzia 7.07.0

Nice to see all the info on an analog watch face. One question: can you make the small dial meters around the small faces color coordinate with the small hands (or provide an option to change it)?

Odpoveď vývojára
Pondelok, 2019, júna 3, mbell-SVK

I'm sorry, but I do not understand what you mean.

Michael Lloyd
Piatok, 2019, mája 31 | Verzia 7.07.0

Using this on a Fenix 5x. I have been looking for an analog face that includes HR, steps, calories, day/date and altitude on a single face. Appreciate the configuration options. The bottom sub-dial showing local sunrise/sunset times seems to be fixed and cannot be deleted, even when 'show sunrise/sunset indicator' is disabled. Very well done.

Odpoveď vývojára
Sobota, 2019, júna 1, mbell-SVK

"Show sunrise/sunset indicator" option enables the indication of sunrise or sunset on the main dial 45 minutes ahead of the event. Furthermore, the sunrise/sunset times on bottom dial can be exchanged by the min/max and current HR as well. There are tons of possible configurations, just play with it. :)

Frankie Rainieri
Utorok, 2019, mája 28 | Verzia 7.07.0

Absolutely love this face although I’m having issues displaying correct min/max for heart rate. It was correct earlier today but now hours later much lower numbers unless these values are an average?

Odpoveď vývojára
Streda, 2019, mája 29, mbell-SVK

These values are read from HR sensor history and correspond to your min and max heart rate within last 4 hours. The values are not anyhow manipulated.

Tony McDonnell
Utorok, 2019, mája 21 | Verzia 7.07.0

Doesn't load onto a garmin forerunner 235

Odpoveď vývojára
Streda, 2019, mája 22, mbell-SVK

Power cycle your watch, then try again.

Utorok, 2019, mája 21 | Verzia 7.07.0

Wonferful watch face. Unfortunally, I can't be able to set the lower sub-face with sun-rise time, sun set and time to next sun event. Seems that the lower sub-face is pre-imposted with min/max heat rate. I wondered if it is necessary to make a donate to activit it! Thank you for support.

Odpoveď vývojára
Utorok, 2019, mája 21, mbell-SVK

Hi, I would replied to your e-mail request sent through the Garmin Store, but your return address was missing (in such case I'm not able to respond ;). If you want to have sunrise/sunset data in the bottom dial you have 2 possibilities: 1) disable "Show HR" option; or 2) choose to display some HR data in the upper dial. There is no activation code (HandsFive is FREE), but of course any donation will be highly appreciated (there are thousands of downloads, but only very few supporters).

Nedeľa, 2019, mája 19 | Verzia 7.07.0

On of the best designs I've seen so far. Testing now - seems to drain battery a bit faster but I can live with that. VA3

Sobota, 2019, mája 18 | Verzia 7.07.0

Cool watchface, working well! Thanks for your hard work.

Piatok, 2019, mája 17 | Verzia 7.07.0

Excelente Cara de Reloj. es la que tengo la mayor parte del tiempo. bien hecho amigo.

Darren W
Piatok, 2019, mája 17 | Verzia 7.07.0

A very nice watch face with a a lot of data shown without being cluttered. A large second hand that is always on would be the icing on the cake. Appreciate there are reasons why this isn't included.

Josef Krott
Sobota, 2019, mája 11 | Verzia 7.06

Super watchface Please make Anti Aliasing

Marcus Stein
Piatok, 2019, mája 10 | Verzia 7.06

Not loading Fenix 3HR

Odpoveď vývojára
Sobota, 2019, mája 11, mbell-SVK

Try to power cycle your watch and then reinstall the watch face. If it doesn't help, contact me via "contact developer".

Štvrtok, 2019, mája 9 | Verzia 7.05

Excellent Watchface. I don't understand why Altitude does not show in my watch. I use it with FR235 watch. Thank you

Odpoveď vývojára
Štvrtok, 2019, mája 9, mbell-SVK

Hi, it is because FR235 doesn't have pressure sensor and the altitude is given only by GPS which cannot be used by watch face.

Utorok, 2019, mája 7 | Verzia 7.04.0

Hello, I can't switch altitude indicator from feet to meters? Anyone can help me?

Odpoveď vývojára
Utorok, 2019, mája 7, mbell-SVK


Sobota, 2019, mája 4 | Verzia 7.04.0

Pretty good. I would really like to be able to turn the seconds off on the dual time. It's also a major bummer that there is no option to set the dual time to be the same as the analog time instead of being a static UTC offset.

Odpoveď vývojára
Utorok, 2019, mája 7, mbell-SVK

And what is the difference? With static UTC offset you will have dual time the same as local analog time (time shift happens only twice a year and it is going to be cancelled anyway).

Abel Avalos Prada
Piatok, 2019, mája 3 | Verzia 7.04.0

Great job!

Štvrtok, 2019, mája 2 | Verzia 7.04.0

Really very good and interesting. Especially because it can be adjusted. In the Fenix 5, there is a small problem, in the upper circle, the seconds indicator stops at the value of the battery charge. Interestingly, only the clock moves several times, starts the indicator of seconds to walk, but stops again. Thank you

Odpoveď vývojára
Štvrtok, 2019, mája 2, mbell-SVK

Hi, the second hand moves only in full power mode, which lasts for 10 sec when activated by your wrist gesture. That's the design feature and there are several reasons for that, but I am not going into the technical details here.

Utorok, 2019, apríla 30 | Verzia 7.04.0

Hello, I like it but it crashes on the 735xt when I enable the history data (the chart) could it be fixed? Thanks

Odpoveď vývojára
Utorok, 2019, apríla 30, mbell-SVK

Hi, it most probably means only that you do not have enough history data in watch memory (is your watch new or did you perform a factory reset?). Wear your watch for one week and then you can enable it.

Jack P
Pondelok, 2019, apríla 29 | Verzia 7.04.0

Awesome watch face! I've been using it for a week and finally have it set up how I like it on my VA3. Only thing I'd like to see different is being able to add the temperature to one of the dials but otherwise it checks all the boxes. Keep up the great work!

Ľutujeme, k dispozícii ešte nie sú žiadne štatistiky.