App Icon

SmartWake

Popis

If you are running into problems or bugs, please contact us via "Contact Developer" before writing a bad review.</p><p></p><p>**SmartWake was nominated for Best App for active lifestyle by Garmin https://www.garmin.com/en-US/blog/developer/connect-iq-developer-awards-2019-nominees/ **</p><p>Also check out our new SmartWake version with heart rate variability feature (HRV) 'Implays Morning HRV' https://apps.garmin.com/en-US/apps/af4e8329-8494-4e6e-927b-9596f67c75e2</p>

Čo je nové

- App-Not-Starting on some devices Bug fixed.</p><p></p><p>- Balloon Tool Tip added on start-up. (Can be switched on/off in App-settings)</p><p></p><p>- Venu Support Added</p><p></p><p>- Fenix 3 HR Support</p><p></p><p>- Updated flow in setup picker for alarm time, wakeup-window and snooze on vívoactive® devices. (Picker opens when hitting watch button and no swipe necessary to confirm anymore, just hit watch button to proceed)</p>

Ďalšie informácie

Povolenia

Táto aplikácia vyžaduje prístup k:

  • FIT súbory (záznamy o aktivitách)
  • Zaznamenať ďalšie informácie do súborov aktivity
  • Uložené informácie, ako napríklad dráhy, cesty, zemepisné body, prejdené trasy alebo tréningy
  • údajom snímača (napr. ANT+, srdcový tep, kompas),
  • História srdcového tepu, barometra, teploty a nadmorskej výšky
  • Nahrajte údaje snímača vo vysokom rozlíšení do súboru FIT (môže výrazne zvýšiť veľkosť záznamového súboru)
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 745 Forerunner® 745
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
  • fēnix® Chronos fēnix® Chronos
  • Venu® Venu®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
Priemerné hodnotenie: (počet hodnotení: 58)

Sureka
Streda, 2020, septembra 9 | Verzia 1.3.1

It works really good! you have to find out which settings are good for you. I would like the 'activity' not to be saved automatically.

Mike
Pondelok, 2020, augusta 24 | Verzia 1.3.1

Works fine but it triggers livetrack

Jacob
Streda, 2020, augusta 12 | Verzia 1.3.1

absolutely useless

Odpoveď vývojára
Štvrtok, 2020, augusta 13, BlackTusk

Hello Jacob, sorry to hear that! We constantly try to keep the functionality and the user happy with this free product. Could you provide us more information what the problem is. What device are you using? Did you follow the instructions on how to setup your Garmin watch that the vibration and sound setting derive from your watch settings? It would be great if you could contact us over "Contact Developer" to that we can try to improve the user experience or even find out what went wrong on your device. Thanks in advance.

Abedron
Utorok, 2020, augusta 11 | Verzia 1.3.1

During activity sleep monitoring not working. Alarm not started...

Odpoveď vývojára
Štvrtok, 2020, augusta 13, BlackTusk

Hello Abedron, What Device are you using? Did you follow the instructions in how to setup the Garmin watch to derive sound and vibration setting properly? Did you download the app after the Garmin shutdown? We are still experiencing some delay with garmin services, but even without the shutdown it took a while for garmin to process the information coming from their watch on their servers. From what we know from Garmin Health API it can take up to a day until the highest validation state is reached (without using our app). Garmin provides about 6 or 7 different validation states of their sleep tracking. Since sleep is only calculated on Garmin servers and not on the watch this is not really in our hands. Did you check if the sleep tracking changes over time? If you could answer us over "Contact Developer" we can try to improve the User Experience. Thanks!

Timothy
Piatok, 2020, júna 12 | Verzia 1.2.8

While in general, it is good; it does conflict with Garmin's Body Battery and doesn't allow it to recharge overnight. Also as it counts an an "activity" it is necessary to silence your phone as otherwise it constantly shouts out activity stats like heartrate (assuming you have it set to notify you while performing an activity) while trying to sleep. Sort those out and it will be 5*.

Teara Parker
Štvrtok, 2020, júna 11 | Verzia 1.2.8

Works well BUT this keeps your body battery from recharging after your sleep.

Eric Saldana
Štvrtok, 2020, mája 7 | Verzia 1.2.8

Works as expected, could be nice to be able to chose different vibration modes/strength

Victor Moore III
Utorok, 2020, apríla 21 | Verzia 1.2.8

This worked well for alarming silently in the period I specified. I did notice the Garmin Connect Body Battery counts Smart Wake as an activity and therefore doesn’t recharge or credit my time asleep to the Body Battery when sleeping with this app. Is there a fix for this?

Daniel Stalder
Štvrtok, 2020, apríla 9 | Verzia 1.2.8

It works perfect. No issues, works exactly as described on my fenix 5. Thank you very much for your work.

Mom's
Pondelok, 2020, apríla 6 | Verzia 1.2.8

J'aime beaucoup le principe de votre appli par contre même en désactivant le rétroéclairage je perds en général plus de 30% de la batterie. J'espère que vous ferez une mise à jour pour qu'elle s'active une heure avant le réveil par exemple.

David
Piatok, 2020, apríla 3 | Verzia 1.2.8

It works perfectly. No issues, works exactly as described and wakes me up reliably! As a hearing aid user this is a lifesaver!

יואב כץ
Pondelok, 2020, marca 30 | Verzia 1.2.8

The alarm only vibrate once and not multiple times so i cant wake up

Odpoveď vývojára
Utorok, 2020, marca 31, BlackTusk

Hello, sorry to hear that. What Garmin device are you using? It behaves very different on all devices. Please contact us via "Contact Developer" so we could figure out what the problem is.

Robyn
Štvrtok, 2020, marca 19 | Verzia 1.2.5

I really like the concept but it’s unusable as the battery dies in one night (e.g. 75%-2%). Would be great if it didn’t have to be an activity as then doesn’t follow watch “sleep settings”.

Odpoveď vývojára
Pondelok, 2020, marca 23, BlackTusk

Hello, sorry to hear that. Unfortunately the battery usage is not really under our control and highly depends on the watch model you are using. We did everything to reduce battery usage to the minimum and for some watches we achieve 4-5% over night. As by design all Connect IQ Apps are "Activities" we can not do anything about it. Could we ask what device you are using? Thanks.

Carlos Alberto Balseiro Mayi
Utorok, 2020, februára 18 | Verzia 1.2.5

Great no-nosense application. Hope Garmin allow it to work with Stress Level and Body Battery in the future.

Kevin Gandingco
Piatok, 2020, februára 14 | Verzia 1.2.5

Installed the SmartWake app on my Fenix 6S Sapphire. Followed all the instructions, including settings for backlight/alerts/tones and making the app a “favorite”. The app name appears on my list of apps, but it won’t open or start. I can’t set the app’s alarm. Selecting any other app works just fine, so I know it’s the SmartWake app that is broken. Sent a message to the developer, but he/she never responded. Maybe they’ll respond to this review.

Odpoveď vývojára
Nedeľa, 2020, februára 16, BlackTusk

Hi Kevin! Sorry for you feedback being unanswered. Although Its a fee app and we ineed get a lot of mails, we aim to answer every single one of them. We could not reproduce the bug you mentioned. We successfully tested it on a Fenix 6S Pro and we could open it and set an alarm. It works perfectly fine in the simulator as well. You might want to update your firmware or reset the watch. Another issue could be that app would not load properly from ConnectIQ store. You can try to delete it and reinstall it, but please don't forget to sync in between.

Vee
Sobota, 2020, februára 1 | Verzia 1.2.5

Great app! Works perfect on my Fenix 5s after backlight setup. Battery drain is definitely under control. Thank you, Developer! P.S. hope to see sleep goal feature with fall asleep detection ;)

Odpoveď vývojára
Nedeľa, 2020, februára 16, BlackTusk

Thanks Vee for you feedback!

Faedi
Nedeľa, 2020, januára 19 | Verzia 1.2.5

As mentioned in other comments, battery usage is an issue. 70% of my vivoactive 4 wasn't enough to get through the night. Display light was turned off and the screen was locked. Hope for a fix, thanks

Odpoveď vývojára
Pondelok, 2020, januára 20, BlackTusk

Hi Faedi! We hope for a fix, too. As mentioned in other comments, battery drain is due to unwanted GPS usage. We think about cancelling support for vivoactive 4 devices until garmin finally fixes the bug. You can find more information here https://forums.garmin.com/developer/connect-iq/i/bug-reports/gps-always-on-during-activity-recording-in-ciq-apps and here https://forums.garmin.com/sports-fitness/healthandwellness/f/venu/209601/gps-activated-for-non-gps-actives

Nick
Pondelok, 2020, januára 6 | Verzia 1.2.4

tried it on Forerunner235. I like the concept, but it can not be used because my battery is always empty before the morning comes. Also I could not Switch of the backlight of the Display. It shines all the night long. Too bad.

Odpoveď vývojára
Pondelok, 2020, januára 13, BlackTusk

Hi Nick! In the section "app info" you may find more information for best performance including backlight. Since all tonal alarm, vibration and backlight settings derive from the general setting of the watch you need to do some adjustments prior to using it. Make sure you change backlight "during activity". All connectIQ apps derive their settings from that category. Regarding battery usage, can you tell us more about it? Did you start with 100% and it is empty before you wake up? How often do you usually charge your watch. There are several users that complained about excessive battery drain on forerunner 235 in the past.

Benji Knights Johnson
Pondelok, 2020, januára 6 | Verzia 1.2.4

Absolutely great concept, however, it doesn't actually work as I seem to be swipping left accidentally in my sleep and cancelling the alarm/activity.

Odpoveď vývojára
Pondelok, 2020, januára 13, BlackTusk

Hi Benji, you might want to lock your screen during runtime of the app. Depending on your watch, garmin also offers auto-lock. You find more information in the section "App info".

Manka
Sobota, 2019, decembra 21 | Verzia 1.2.4

There was no vribration on alarm (vivoactiveHR). Gesture for backlight is off and vibration is set to high. Also the "cog wheel" button is missing on app screen.

Odpoveď vývojára
Pondelok, 2020, januára 13, BlackTusk

Hi Manka. It seems totally fine in the connectIQ simuator. All buttons are there. Since we do not have a vivoactiveHR we need your input on that one. Can you send some screens to the contact adress? Did you switch off gesture for backlight in the menu entry "during activity" or "not during activity". Since garmin connectIQ apps create an activity (by design) you might want to make sure that you set it correctly. We do not alter vibration in any way. It is a global setting of the watch. Vivoactive HR has known issues with the vibration alarm and intensity. You might want to check garmin forum for that.

Marko
Nedeľa, 2019, decembra 15 | Verzia 1.2.3

Alarm itself seems to work. But uses too much battery to be really useful. It drains from 60-70% per night. My device: Vivoactive 4

Odpoveď vývojára
Piatok, 2019, decembra 20, BlackTusk

Hi Marko. Some users reported that high battery consumption is due to gps activation on vivoactive 4. We do not even use gps feature explicitly in the app. When we find that to be true, we will report this bug to Garmin. There might be a workaround for that, but we have to check if this is resonable, since we would have to change our app for every device just to be able to support vivoactive 4.

Paul Mannarino
Sobota, 2019, decembra 14 | Verzia 1.2.3

The sleep cycle detection and alarm seem to work great. The battery drain however is very bad. It usually drains about 60% per night. I have the Vivoactive 4.

Odpoveď vývojára
Piatok, 2019, decembra 20, BlackTusk

Hi Paul! Thanks for the feedback. It seems that we have an issue with battery consumption on vivoactive 4. We will investigate it (see answer on top of your review) but we cannot promise anything. Best case we can find a solution or garmin can fix the problem. Worst case we have to discontinue support for vivoactive 4.

MT
Piatok, 2019, novembra 29 | Verzia 1.2.1

Great app. Uses less battery than Sleep as Android. Better with "save as activity" turned off. Would like to see stress and body battery fixed. Would like gentle vibrations with increased intensity.

Odpoveď vývojára
Nedeľa, 2019, decembra 8, BlackTusk

Hi MT, thanks for your input! As I mentioned below, this is beyond our control. You can help us by forwarding the issue with the body battery to the garmin support. You can also help us by adressing the stress issue. There might be a chance that it can be calculated retrospectively. Interestingly sleep can be calculated although an activity is running. Vibration alarm sounds like a good idea for a new feature!

Milan Fischer
Piatok, 2019, novembra 22 | Verzia 1.2.1

It works, but fenix 6 does not mesures stress and body battery when activated

Odpoveď vývojára
Nedeľa, 2019, decembra 8, BlackTusk

Hi Milan, thanks for your review. You can help us by forwarding the issue with the body battery to the garmin support. It is a known issue and they said that the device team will fix it with one of the next firmware upgrades. As of now, stress cannot be evaluated during runtime of an activity. I guess the main purpose of an activity is to do a workout, which does not ceate usable data for stress evaluation. Again this is a usecase that was probably not forseen by Garmin, but if enough people adress it, they might consider changing it. For us, creating an App was the only way to implement the sleep phase alarm.

Per Klitgaard
Štvrtok, 2019, novembra 21 | Verzia 1.2.1

It drains more battery than i like. But its a really good app. I like the idea with preset hours of sleep, so it could wake me after 7 hours of sleep. I was a bit annoyed that it records my activity to strava. But have seen that it has been fixed :-)

Odpoveď vývojára
Sobota, 2019, decembra 7, BlackTusk

Hi Per, thanks for your feedback. Sorry for the limitations of the app, we tried to get the maximum out of it regarding battery consumption. We are looking into a sleep goal feature.

Ľutujeme, k dispozícii ešte nie sú žiadne štatistiky.