The widget shows the current temperature of your Garmin device in degrees Celsius, Fahrenheit, and Kelvin. Press START or tap the screen to change the units of measurement. Large font is used. No Internet connection is required.</p><p></p><p>First, the widget reads the internal sensor data. The sensor is affected by body heat, so the value is an average between your body temperature and the ambient temperature. If you need to know the ambient temperature, remove the device from your wrist. Wait 10 minutes for the device to show the ambient temperature. Some devices require you to connect an external temperature sensor to the watch (for example, Forerunner 245, Gpsmap 66/86).</p>
2.4.2 - SDK 4.2.4, new devices added</p><p>2.3.1 - SDK 4.1.7, new devices added</p><p>2.2.9 - Ui fix and workarounds, speed improvements.</p><p>2.2.7 - SDK 4.1.4, new devices added</p><p>2.2.6 - SDK 4.1.1, new devices added</p><p>2.2.5 - new devices added, fenix 7 series, epix (Gen 2)</p><p>2.2.3 - SDK 4.0.7, correction for Oregon 7xx, Montana 7xx messaging system: tempe sensor required</p><p>2.1.2 - correct supported devices list</p>
Táto aplikácia vyžaduje prístup k:
Adrian
16. novembra 2021 |
Verzia 2.1.2
Red Dragg
12. októbra 2021 |
Verzia 2.1.2
Taylor
20. septembra 2021 |
Verzia 2.1.2
Very simple widget, but it works with Vivoactive 4, where I wasn't able to display temperature otherwise.
Darko
6. septembra 2021 |
Verzia 2.1.2
Excellent for seeing a current temperature in decimal value! Thank you!
Torijano
24. augusta 2021 |
Verzia 2.1.2
No corresponde a la temperatura real, mucha diferencia
Odpoveď vývojára
24. augusta 2021,
Navicom
Please read the description. App shows temperature from internal sensor. Body heat + environmental temperature = average tempetature. It is Garmin design, if you have any propositions and improvements please contact them via garmin.com/ideas. Not us. We just show you the readings from the sensor your device has. Thanks for 1 star. Very motivating. Have a great day!
Adam Župka
22. augusta 2021 |
Verzia 2.1.2
Vívoactive 4, not working "NOT SUPPORTED, INVALID SENSOR DATA"
Odpoveď vývojára
23. augusta 2021,
Navicom
We suspect it appeared after you updated software, right? Please contact support.garmin.com and replace your device. Garmin started the game to disable features from the devices in released firmware. May be the Edge Explore Story raises again. Sad but true.
Jorge Aranda Jordà
21. augusta 2021 |
Verzia 2.1.2
Al tercer día de tenerlo instalado se ha cambiado a grados Fahrenheit solo y no consigo pasarlo a Celsius
Daniel H.
9. augusta 2021 |
Verzia 2.1.2
Schade keine Einstellung zum Kalibrieren, oder sonstiges. Auch kein Temperaturverlauf von 4 Stunden oder so schade
Евгений
28. júla 2021 |
Verzia 2.1.2
Температуру не замеряет! Выше 29.5 не показывает
Odpoveď vývojára
29. júla 2021,
Navicom
Сожалеем, это не медицинский прибор. Температура измеряется встроенным датчиком, на который влияет как температура вашего тела, так и температура окружающей среды. Термодинамическое равновесие устанавливается внутри корпуса часов и температура внутри никогда не будет равна температуре вашего тела. Так работает датчик, это дизайн Garmin. Это написано в описании продукта. Благодарим вас за высокую оценку нашего труда и желаем успехов в путешествиях! От всей души, спасибо!
Krzychu
21. júla 2021 |
Verzia 2.1.1
Work great. I take off watch, wait 5min and i have room temp. Preety nice!
Jacob Rasmussen
13. mája 2021 |
Verzia 1.9.9
Works perfect on D2 air. Even the manual states no temp sensor. I have perfect reading. It’s even better than my old D2 Charlie
Jimba Rauer
4. mája 2021 |
Verzia 1.9.9
This app works great, thank you. I use it with a Garmin Venu and the Garmin Tempe sensor and it works just fine. It reads the watch first then it reads the Tempe sensor. I've had to go in and manually connect the Tempe sensor to my watch before but that's not this app's fault.
Pollon
21. apríla 2021 |
Verzia 1.9.9
Przemysław Kaczorek
13. apríla 2021 |
Verzia 1.9.9
Działa z czujnikiem ANT, prawidłową temperatura pojawia się po ok. 30 sek.
Денисенко Роман
6. apríla 2021 |
Verzia 1.9.9
Это температура микросхемы, не окружающей среды. Соответсвеннено нет смысла от этих данных. Руку тоже не измеряет.
Paco Vigil
16. marca 2021 |
Verzia 1.9.9
Zachary Nikolayev
27. februára 2021 |
Verzia 1.9.6
Pretty useless. Unless you have 10 min to wait around just to find out ambient temperature of your environment.
Agus Pianoman
21. februára 2021 |
Verzia 1.9.6
It works fine. I take off my watch and, in a few minutes, it shows the same temperature as my weather station. Thank you!!
Pablo Sonder
16. februára 2021 |
Verzia 1.9.6
Odpoveď vývojára
19. februára 2021,
Navicom
Read the description: "It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental temperature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature." It is Garmin Hardware design. If you have any propositions and concerns - contact Garmin Support.
KAyers84
6. februára 2021 |
Verzia 1.9.6
Downloaded it after checking to see if my watch was compatible....but its not supported after all.
Константин
2. februára 2021 |
Verzia 1.9.6
Работает корректно. При сравнении с комнатным термометром совпадает до десятой градуса. До - 5°С работает точно. При более низкой температуре не проверял.
Alecroft
26. januára 2021 |
Verzia 1.9.6
No funciona o estoy muerta porque si mi temperatura es de 30º o menos, sería imposible estarlo
Odpoveď vývojára
27. januára 2021,
Navicom
Read the description: "It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental temperature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature." It is Garmin Hardware design. If you have any propositions and concerns - contact Garmin Support.
DK
16. januára 2021 |
Verzia 1.9.6
Garmin Vivoactive 3. Seit 3 Tagen funktioniert das Widget nicht mehr.
Maciej Piecko
24. decembra 2020 |
Verzia 1.9.6
It is working with FR245 and Tempe ext. sensor only when currently connected to the sensor. Wigdet connects to the sensor automaticly every time its displayed and when widget is not visible it disconects from the sensor. The connection time is long, I have to wait a while to see the reading. I doubt if it is useful in that configuration.
Odpoveď vývojára
24. decembra 2020,
Navicom
That is Garmin design and the way how the Tempe works internally - it lowers power consumption and broadcast information rarely. If you are electrical engineer, or have another ideas how to improve the situation - you can write garmin.com/ideas. Thank you for review.