App Icon

Chrono style watchface


Configurable chrono style watchface providing analogue and digital gauges. </p><p>+ 1 Hz mode; +64 colours; + while awake, information is cycled in gauges; + altitude graph on F3 derivates; + sensor history gauges with graph; + a lot of configuration possibilities </p><p>If you like this watchface consider a donation:</p><p>Discuss this watchface at the Garmin Foru...

Čo je nové

v1.48 Support for Descent MK1 and sdk 2.4.1</p><p>v1.47 Minor graphical changes, inactive symbols are shown now (alarm, bluetooth, notifications)</p><p>v1.46 Minor bugfixes in alt graph and sunset/sunrise calculations</p><p>v1.45 S60 should be compatible with firmware 2.9 now. Be aware: You should update to firmware 2.9 to get the full functionallity of this update. New features for S60: 1 Hz m...

Ďalšie informácie


Táto aplikácia vyžaduje prístup k:

  • História srdcového tepu, barometra, teploty a nadmorskej výšky
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5
  • fēnix® 5S fēnix® 5S
  • fēnix® 5X fēnix® 5X
  • fēnix® Chronos fēnix® Chronos
  • vívoactive® 3 vívoactive® 3
  • vívoactive® HR vívoactive® HR
Priemerné hodnotenie: (počet hodnotení: 158)

Pondelok, 2017, december 11 | Verzia 1.48

This is by far my favorite watch face! it has everything I want on the face and you are able to configure this to your exact preference. I would give it 5 stars but i have had to reboot, uninstall/reinstall the watch face 3 times in the last few day. I am using the Fenix 5X and iPhone IOS 11.2 even with that, i use this face almost exclusively. it would be absolutely perfect without the crashing.

Odpoveď vývojára
Streda, 2017, december 13, DirkN.

Hi, are you able to send me your CIQ_LOG.TXT file in the garmin/apps/logs directory on your device? That way I may have a chance to see, where your problem is.

Sobota, 2017, december 9 | Verzia 1.47

Una delle più belle e ben fatte... completamente personalizzabile

Piatok, 2017, december 8 | Verzia 1.47

could not get it to download.tried it three times

Odpoveď vývojára
Sobota, 2017, december 9, DirkN.

This is not related to my watchface, please be fair. Have you tried the garmin express app on pc? The installation of this watchface may take a few minutes with a mobile phone. Are you sure you finished it?

Piatok, 2017, december 8 | Verzia 1.47

I have this installed on my FR235 for the last 2 weeks and am loving it! The color customization and patterns are great. I have green hands on a purple rombus background and it's stunning. The moonphase window is also killer!

Odpoveď vývojára
Sobota, 2017, december 9, DirkN.

Thanks for your nice feedback.

Streda, 2017, november 29 | Verzia 1.46-upd

highly configurable which is really nice, but it resumes back to default configuration eventually, and now the watchface even unavailable

Utorok, 2017, november 28 | Verzia 1.46-upd

Wondering how you go about changing the color scheme. I have it install on my Fenix 3. Thanks!!

Štvrtok, 2017, november 23 | Verzia 1.46-upd

There seems to be a new problem - and one that seems to affect all watchfaces. It's not possible to configure them any more! The configure function on my Garmin Connect App on my iPhone has vanished! Not just for your watch face, but for all of them. This has happened in the last couple of weeks. I've tried re-installing, clearing out application and slots to free memory, but to no avail. Any idea what the issue might be? I'm on firmware 6.0.0 on a Fenix 5.

Odpoveď vývojára
Sobota, 2017, november 25, DirkN.

Hi, from what I read this problem occures on iphones with ios11. There is a workaround in the forum somewhere. Cheers

Utorok, 2017, november 7 | Verzia 1.46-upd

Crash each hour on fenix 5x. Try to uninstall install not work.

Odpoveď vývojára
Utorok, 2017, november 7, DirkN.

Did you reboot after uninstall? By the way, please write me an email so we can discuss your problem. I spend a lot of time in this so I am not really keen on 1 star ratings, especially if you consider, that this watchface is free...

Pondelok, 2017, október 23 | Verzia 1.46

I tried to install your watch face on my Fenix 5 - but when trying to activate it on the watch it doesn't appear in the list. At the end of the list on the watch it only shows "iQ" - but not your watch face. With other watch faces from the store it worked.

Odpoveď vývojára
Štvrtok, 2017, október 26, DirkN.

Could you try to reinstall it or reboot your device? From other users with a fenix 5 I know it works. If that does not help, please write me a mail so we can tackle this issue together.

Nedeľa, 2017, október 22 | Verzia 1.46

Very nicely done with lots of options. A bit limited on my vivoactive HR because of the space available. Lots of great information that I use each day. Thanks for providing this app.

Piatok, 2017, október 20 | Verzia 1.46

No start appena in 735 xt

Odpoveď vývojára
Nedeľa, 2017, október 22, DirkN.

please try to restart your watch as stated in the app info.

Nedeľa, 2017, október 8 | Verzia 1.46

crashes on fenix 5x since FW 5.84 and 6.0 / falls back to fefault settings. esp when you have an incomming call Works OK on fenix 5

Odpoveď vývojára
Nedeľa, 2017, október 8, DirkN.

The fenix 5 and the fenix 5x share exactly the same code. If it runs ok on a fenix 5 and on the simulator and it doesn't run ok on the fenix 5x device I don't see the mistake on my side. Especially, if the error occurs after firmware updates... I would suggest you uninstall my watchface, reboot and install it again and see, if it helps. I don't own a fenix 5x and the simulator doesn't give me realistic results, so tbh I don't know what to do.

Sobota, 2017, október 7 | Verzia 1.46

Warum ist es nicht möglich diese Ausführung für die Fenix 5 an zu wenden? Sehr schade.

Odpoveď vývojára
Nedeľa, 2017, október 8, DirkN.

Welche Ausführung? Die fenix 5 sieht genauso aus, wie es im Vorschaubild gezeigt wird. Ich kann Ihnen leider nicht folgen...

Sobota, 2017, október 7 | Verzia 1.46

I just installed it on Fenix 3HR & spent last 2 hours fiddling its many customization options to get the best look. So far I like it very much - especially background configurations eg. circles. Very nice! Makes watch look expensive. Keep up with the good work. Perhaps you can add other metrics for display like Recovery Time, Training Effect, etc as options for digital section (at bottom of watch face).

Streda, 2017, október 4 | Verzia 1.46

Nice WF! I would love if the second marker would leave a trail and then disapear when it reaches 60 seconds. Just like the older version!
Pondelok, 2017, október 2 | Verzia 1.46

crashes on fenix 5x since FW 5.84 and 6.0 / falls back to fefault settings. esp when you have an incomming call Works OK on fenix 5.

Odpoveď vývojára
Utorok, 2017, október 3, DirkN.

Hi, could you write me an email to investigate this issue?

Sobota, 2017, september 16 | Verzia 1.46

Can not display to my Felix 3

Odpoveď vývojára
Nedeľa, 2017, september 17, DirkN.

Please read the description, especially the part "if you encounter problems...". I have a Fenix 3, too. So I am sure that it does work.

Sobota, 2017, september 16 | Verzia 1.46


Streda, 2017, september 13 | Verzia 1.46

This is an elegant watchface that presents the information I want to see in an attractive style. It provides many, many opportunities for customization, and makes good use of the available resolution. I especially like the treatment of the seconds indicator.

Streda, 2017, september 13 | Verzia 1.46

Works great on fenix 3 hr, I've only one request: is it possible to remove the second hand? It's very unstable and always disappear. Nice work btw!

Nedeľa, 2017, september 3 | Verzia 1.45

It's really a cool face. I have the Vivoactive HR. What I'd like to see for the VAHR would be options to change the margin dashes to triangles and also a digital-style format for the gauges. Basically it's really a cool face but it would be a 5-star for me if there would be a way to digitalize the font and have options for the tick marks--basically to achieve the look available for the Round-style faces.

Odpoveď vývojára
Nedeľa, 2017, september 3, DirkN.

Well the problem with the VAHR is, that the watchface memory is very limited. Custom fonts use quite an amount of memory which I don't have. Same goes with extra options for margin dashes. I am really at the limit now. In addition, you wanted to see triangles as dashes. I can imagine triangles at 3,6,9,12 o'clock, but the other dashes won't work...

Piatok, 2017, september 1 | Verzia 1.45

This watchface checks all the boxes. It lets me see all the info I want to see and lets me customize appearance to my heart's content. And it's attractive, making full use of the available screen resolution. Thanks, Dirk!

Piatok, 2017, september 1 | Verzia 1.45

I love the watch face -- and rated it a well-deserved 5-stars -- but I cannot get my 5x to display the watch faces found in the examples shown on the main page. Out of the five shown examples, I would love to be able to make my 5x watch face look like any one of the first 3 examples. Is there a cheat sheet of sorts that would show the user how to configure this watch face to look like the first three examples on the main watch face page? Thanks.

Odpoveď vývojára
Piatok, 2017, september 1, DirkN.

Well on Fenix 5 derivates I need the outer ring for the permanent seconds. That is why it looks different from the first 2 watchfaces shown in the examples. The third example however is exactly your watchface. This should be doable with your settings. If you need some more explanations just write me an email. Cheers

Štvrtok, 2017, august 31 | Verzia 1.44-upd

Sorry, but I can't get used to it on my Garmin Vivoactive HR. I appreciate that this is very much a work in progress, but it's far from intuitive to use. You have said that the border colour can be changed, but I'm damned if I can figure out how. Also, the limited hands style makes it a little restrictive on the square design - the gauge displays are regularly obscured by the hands until, say, 5 minutes or so has passed and the display is revealed again. Thinner hand styles would alleviate such a problem. I shall probably check back for possible updates. However, at the moment I can't see me using this - I do like the appealing round designs, though.

Odpoveď vývojára
Piatok, 2017, september 1, DirkN.

Well, I said, that you can change the margin colour. I think this is what you call the boder colour. If you look into the settings, there is an option called "margin colour". This is what you are looking for. For the Hands, well I will think of something. I will put it on my to do list.

Pondelok, 2017, august 28 | Verzia 1.44

I like it a lot, it will be great to have some extra designs of hands

Ľutujeme, k dispozícii ešte nie sú žiadne štatistiky.