Utorok, 2020, júla 7 | Verzia 0.23
Approach S62 shows "None Paired" ? S62 is on the support list.
Streda, 2020, júla 8, jim_m_58
Pairing refers to a paired Tempe Sensor. Do you have one?
The internal temperature is not available on the s62, so a tempe is the only option.
Streda, 2020, júna 24 | Verzia 0.23
fenix3 HR - I only get temperature from the Tempe-sensor, no Internal reading showing on the screen. (Temps v. 0.23)
Piatok, 2020, júna 26, jim_m_58
The f3 doesn't support CIQ reading the internal temperature. Internal temp is only available on newer devices.
Štvrtok, 2020, júna 11 | Verzia 0.22
Internal temperature is not available on Forerunner 245. Can you implement an option to disable the internal temperature? Tempe works fine.
Štvrtok, 2020, júna 11, jim_m_58
I'll add it to my list of things to look into
Streda, 2020, mája 27 | Verzia 0.22
I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.
Streda, 2020, mája 27, jim_m_58
You must be thinking of a different widget as this one never vibrates. Could it be the FW is doing a vibrate when it connects to the tempe?
Streda, 2020, mája 20 | Verzia 0.22
Ok, very very Ok.
Piatok, 2020, mája 15 | Verzia 0.22
Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.
Pondelok, 2020, mája 11 | Verzia 0.22
I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.
Utorok, 2020, mája 12, jim_m_58
It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.
Sobota, 2020, mája 2 | Verzia 0.22
It doesnt work in Forerunner 235, i dont know why, please help me!!
Nedeľa, 2020, mája 3, jim_m_58
The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.
Štvrtok, 2020, apríla 9 | Verzia 0.22
No salecen grados centigrados
Štvrtok, 2020, apríla 9, jim_m_58
C or F is based on a standard setting on your watch.
Under Settings/System/Units, set Temperatature Units to C or F.
Utorok, 2020, marca 31 | Verzia 0.22
Installed on my Vivoactive HR and doesn't work.
Utorok, 2020, marca 31, jim_m_58
Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.
Piatok, 2020, januára 17 | Verzia 0.21.7
does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.
Piatok, 2020, januára 17, jim_m_58
The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.
Sobota, 2019, decembra 21 | Verzia 0.21.6
This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!
Nedeľa, 2019, decembra 22, jim_m_58
In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor.
As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.
Streda, 2019, júla 31 | Verzia 0.20.1
Streda, 2019, júla 17 | Verzia 0.20.1
So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) :
Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause.
Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.
Štvrtok, 2019, mája 9 | Verzia 0.20.1
Очень полезное приложение для тех, у кого есть garmin tempe.
Работает отлично на garmin fenix 5X plus.
Streda, 2019, januára 2 | Verzia 0.18
Great widget Jim! Keep up the good work
Streda, 2018, decembra 12 | Verzia 0.18
Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?
Štvrtok, 2018, decembra 13, jim_m_58
Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.
Utorok, 2018, decembra 4 | Verzia 0.18
Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended
Utorok, 2018, decembra 4, jim_m_58
Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.
Streda, 2018, novembra 28 | Verzia 0.18
Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!
Utorok, 2018, októbra 30 | Verzia 0.18
Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???
Streda, 2018, októbra 31, jim_m_58
That's the version number of the app.
Štvrtok, 2018, októbra 25 | Verzia 0.18
Excellent. Exactly what i was looking for. Totally 5 stars!
Enrique Del paso
Sobota, 2018, júna 30 | Verzia 0.17-upd3
On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...
Sobota, 2018, júna 30, jim_m_58
The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.
Piatok, 2018, júna 29 | Verzia 0.17-upd3
Great and simple
Pondelok, 2018, júna 25 | Verzia 0.17-upd3
Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.
Utorok, 2018, mája 1 | Verzia 0.17-upd1
Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max