Streda, 2019, februára 6 | Verzia 2.69.2
Is possible to have a metric unit system and Italian language? Thanks
Streda, 2019, februára 6, jim_m_58
Statute or metric as based on the settings on your watch. Under "Settings-System-Units"
This app is only available in English.
Nedeľa, 2019, januára 13 | Verzia 2.68
Great app, love it!
But can we get an option to turn off elevation alerts? It's not needed for me to have it vibrate every time I climb up or down... I know I'm climbing anyway! :D
Nedeľa, 2019, januára 13, jim_m_58
In app settings, turn off the "Dots for Floors On Chart"). The wording changed to
"Floors Alert and Show on chart" in the current version.
So you can already turn it off.
Sobota, 2019, januára 5 | Verzia 2.68
Any plans adding map support on Edge devices?
Nedeľa, 2019, januára 6, jim_m_58
Yes, for the edge 1030, but it's taking a bit longer than for the fenix 5x and fenix 5+ devices.
Streda, 2019, januára 2 | Verzia 2.67
After two days of attempts of registering my track I've uninstalled it and chose another one.
I used it on a Vivoactive 3. It got continuously paused while I was moving (a vibration informed me every time of them). It lost a lot of the gps and altitude data. I'm sorry to give a bad review but my experience with this app has not been so good. There are others that offer more and that I used with no problems
Streda, 2019, januára 2, jim_m_58
I'm not sure what you mean by "registering my track". The only way to pause the app is by pressing the button, so it shouldn't happen randomly. Are you sure you are seeing this with Hike2 and not another app? Please use Contact Developer so we can sort this out
Nedeľa, 2018, októbra 7 | Verzia 2.64
Esta aplicación cuenta los pasos?
Nedeľa, 2018, októbra 7, jim_m_58
On devices that track steps, it shows steps on the same screen where calories are displayed. Edge devices don't track steps, and on others, Activity tracking must be on.
Change screens with up/down buttons or swipes to see the different screens
Utorok, 2018, októbra 2 | Verzia 2.64
Sorry, the "GPS" option is not displayed in "Settings".
Utorok, 2018, októbra 2, jim_m_58
That's not available in any CIQ device app. The way it works, is it uses the setting from the last native app you used. It's nothing with Hike2 itself. Please use "contact developer" (on the right) for questions like this instead of leaving reviews.
Piatok, 2018, septembra 21 | Verzia 2.63
Good app as per reviews however not able to locate option to switch on GPS. I have tried means available but not able to do it.
Piatok, 2018, septembra 21, jim_m_58
Hike2 turns on GPS itself. If you are seeing a delay getting GPS, start something like the native run app, and wait for it to "go green". It shows better progress in getting a fix than is possible in CIQ.
Streda, 2018, septembra 19 | Verzia 2.63
I've installed app on VA3 and it works perfectly. Big thanks to the developer. It has everything i expected and even more
Nedeľa, 2018, septembra 9 | Verzia 2.63
Great hiking app, best one imo available. Only complaint is when I sync the watch to the phone app, the hiking activity doesn't show up anywhere in the phone app so you won't have a history of your previous hikes.
Nedeľa, 2018, septembra 9, jim_m_58
It should show up under "all activities" on your phone (Activities,All Activities) Hiking doesn't have it's own category like Walking, Running, Cycling do. That's a decision by Garmin.
Piatok, 2018, augusta 31 | Verzia 2.62
Nedeľa, 2018, júla 29 | Verzia 2.62
why do I not receive notifications, missed calls or what's apps while recording. With the original Garmin Apps it works perfectly, but yours is not showing anything...
Nedeľa, 2018, júla 29, jim_m_58
Please use "Contact Developer" and supply info such as the device you have and it's firmware version. There also is an about in the settings for most devices for what type of notifications you want to see while in an activity, so check on that. Are you sure your phone is connected at the time (see what the phone says)
Piatok, 2018, júla 27 | Verzia 2.62
I wanted an app for hiking that showed plenty of details about the hike, was not complicated to use and provided reliable data. Well Hike2 does all of that and has the added benefit of being free! Pretty surprising for an app of this quality. It’s been working great on my VA3. I was also pleasantly surprised by the quality and speed of the support. I asked them several different questions and they were all answered within a few hours. I highly recommend this app and this developer.
Streda, 2018, júla 25 | Verzia 2.62
Gute Wander App. Würde eine deutsche Übersetzung gut finden. Autopause gibt es wohl keine?
Nedeľa, 2018, mája 20 | Verzia 2.53
I used it for a 13-day walk and it worked perfectly fine! Everything you need!
! @edmasamo (IG)
Piatok, 2018, mája 4 | Verzia 2.53
I like the latest review, however - I noticed that the floors climbed vibration comes up quite a lot! It didn't used to do it as much, is there any way to adjust/customize how often it vibrates? or to turn off the vibration for floors climbed? It feels like a bit too much.
Sobota, 2018, mája 5, jim_m_58
That happens when the firmware thinks there was a floor up or down. While in Hike2, there is a general setting for vibrations/tones, there's not one that specific to each type of message like this. In settings, you can turn off "Dot for Floors" and this will also turn off the message for floors (and their location on the chart), but the count will still show on the floor/intense minutes screen.
Piatok, 2018, apríla 27 | Verzia 2.53
Everything you need for serious walking without gimmicks or flashy graphics. Works well on FR645.
Utorok, 2018, apríla 24 | Verzia 2.53
Tolle App verwende sie sehr häufig Höhenmessung sehr gut und auch die anderen Funktionen sehr gut nur wieder so
Streda, 2018, marca 28 | Verzia 2.52
Отличное приложение! Сегодня протестировал. Впечатления самые лучшие. Спасибо за труд! Удачи Вам!
Pondelok, 2018, marca 26 | Verzia 2.52
Lots of useful info, good presentation, many customization options.
Piatok, 2018, februára 23 | Verzia 2.50
Good revision in the last version!
I would ask: there's a way to enable/disable GLONASS mode?
Piatok, 2018, februára 23, jim_m_58
That's based on what was last used in native apps (like running), and isn't something I can do from Connect IQ.
Nedeľa, 2018, januára 28 | Verzia 2.14
Great app. I have used it for more than one year on my va hr. Recently, I noticed that the lap function is not available. Not sure, if you removed it or it would not work on the device.
Nedeľa, 2018, januára 28, jim_m_58
There is auto lap function that is off by default, and the lap key itself is used to mark waypoints.
Nedeľa, 2018, januára 28 | Verzia 2.14
Hike2 is my favourite app.
It ha s only one defect, imho:
It would be a good thing if - when we pause - we can have a
summary scrolling screen and below (pushing "down" button) the three options:
3. Resume Later
like other native-preinstalled apps by Garmin.
That would make complete Hike2 and allow to save more battery during longer breaks (like in the lunch break)
Nedeľa, 2018, januára 28, jim_m_58
When you pause (the resume/dave/discard screen), you can press the back button, and see all the screens you can see when you aren't paused (with an indicator you are paused). Press start again brings back the menu, where you can resume.
"resume later" isn't possible with Connect IQ applications.
Pondelok, 2018, januára 22 | Verzia 2.14
I am not sure yet whether this app will accomplish what I want, which is to have a map of my route from start to finish that will allow me to backtrack along a path until I get back to my starting position. The reason I am unsure still is that following a path back to a way point is not super easy without a compass superimposed on the path showing me the direction to go.
Also I am not sure what you mean by the field labeled "sun up". That sounds like sunrise, but it seems to me what you really mean is that once the sun is up, that is how much day light I have until sunset, since any other interpretation makes no sense because where I live sunrise is 7:38 am and sunset is 5:38, and the other fields state "sunrise in 5:25, sun up: 9:59"
Nedeľa, 2017, decembra 24 | Verzia 2.11.2
Hello, I love this app, but lately it didn't record a 3h GPS track despite having fixed GPS in 2 occasions. It is a bit confusing as well to know if you resumed correctly after you paused, pushing the button on va3 should resume tracking but it didn't, had to chose resume on screen. I had some boot loops with my watch, so the bug with GPS track not being recorded may not be linked to the application however using walk native app did record correctly the end of my hike. A bit concerned about app reliability now, but will test again.
Nedeľa, 2017, decembra 24, jim_m_58
There is a bug in th 2.70 Firmware on the va3 that impacts all CIQ apps that use GPS. We just have to wait for a firmware update. Here's a thread about it:
Piatok, 2017, decembra 22 | Verzia 2.11.2
Downloaded. Can't see how i change user setting...? I have a fenix 5s. Any advice?
Piatok, 2017, decembra 22, jim_m_58
There are a couple things you change on the watch itself -like white or black background. On the f5x, long press the up button to get a menu for those.
The majority of settings you change with your phone or Garmin Express. Here's a simple guide to using app settings: https://forums.garmin.com/forum/developers/connect-iq/connect-iq-showcase/115055-how-to-app-settings