App Icon

Bontrager Light Control


Bontrager Light Control data field gives you the ability to directly control the modes of any connected Bontrager RT series lights. Once the lights are paired with the Edge computer, the data field will display a graphical battery status, and buttons to quickly change the mode of the connected headlights and taillights.</p><p></p><p>To Setup:</p><p> 1. Download and install the data field to you...

Новые функции

1.1.1 - Edge 1030 support. CIQ SDK version 2.3.4.</p><p>1.0.8 - Updated build using the new CIQ SDK version 2.2.6</p><p>1.0.7 - Updated build using the new CIQ SDK version 2.2.5</p><p>1.0.6 - Fixed potential crash in the settings screen</p><p>1.0.5 - Updated build using the new CIQ SDK version 2.2.4</p><p>1.0.4 - Fixed an issue with the version number not updating when updating to a new version...

Дополнительная информация


Данному приложению требуется доступ к следующей информации:

  • Отправка данных на датчики сторонних производителей или получение данных от них по беспроводному интерфейсу через модуль ANT
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 820 Edge® 820
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
Средняя оценка: (Отзывы: 25)

Mike Jacoubowsky
4 Март 2018 г. | Версия 1.1.1

There should be an over-ride to the ambient light sensor. During daytime, I want to have the headlight "flashing" at all times, but if you go through a tree-covered area, it switches to solid mode, thinking it's "dark" and you need the light to see. It's in such conditions that I really want that light flashing! Plus it's a bigger drain on the battery. So my ask would be to tie an automatic mode into the Garmin's built-in ability to know sunrise & sunset times. Thanks!

Ответ разработчика
5 Март 2018 г., TrekBicycles

Hi Mike, The 'auto' mode is controlled by Garmin, and reflects the settings you have for the light network. The other buttons are overrides to whatever the Edge has put the lights into. What you are describing is actually the intent of the light control. If auto is not doing what you want, you can quickly change to whatever mode you need, and then give control back to the Edge when you are done. Hope that helps.

Felipe Serra
1 Март 2018 г. | Версия 1.1.1

What setup for using always the same mode, for example: All Day Flash, how do i setup the network light options and the light it self? By the way i have only one ant+ light . Does the brake functionality works on Flare RT? Can i lock the mode? As in Flare R only?

Ros Tocker
30 Декабрь 2017 г. | Версия 1.1.1

headlight is always in high-mode on timerstart or garmin is ractivated after break does not change mode before turn off in sleepstate, permanently low- or medium-mode is missing or automatically reactivate the last mode after break with garmin sleepstate, important on long tours to save batterypower.

Peter van Wijk
3 Октябрь 2017 г. | Версия 1.0.8

Werkte erg goed op mijn Edge 1000. Helaas niet compatibele met de Edge 1030!!!

Ignacio Ramirez Gonzalez
29 Сентябрь 2017 г. | Версия 1.0.8

Don't work with my new Edge 1030¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

Sam Golden
26 Сентябрь 2017 г. | Версия 1.0.8

You should be able to configure the auto mode, first off there is no documentation as to what auto mode even does. Secondly maybe I don't want my headlight in low or high mode and I want it in a flash mode depending on day or night. It would be great if you could set things like above X speed I want the mode to be HIGH LIGHTS, if I am below x speed set to day or night flash etc... people are going to want different settings here, ultimately I should be able to configure different profiles based on what I am doing too. If you don't want to provide such configuration let at least document what "auto" mode does for the headlight and tail light as I have both and I can't tell what it is trying to do. Lots of potential here, GIVE SOME UPDATES!

Ответ разработчика
5 Октябрь 2017 г., TrekBicycles

Auto is controlled by the Edge light network mode. Your options in the Edge setup are: Auto - Ambient light controlled for day and night settings HiVis - Puts the lights in flashing modes Individual - The Edge does not automatically set the modes. Your ideas are good, I would advise passing them along to Garmin. They control what the network modes do on the Edge.

13 Сентябрь 2017 г. | Версия 1.0.8

It works well with my Bontrager Flare RT. However, I feel as though it is really better suited to being a Widget, rather than a data field. Data Field screens are precious, and there's no reason to have to scroll through this app when I rarely have to use it. I'd rather swipe down on my Edge 1000, swipe right or left and have the light controls available there.

Gabriel Wehle (el Gabo)
9 Сентябрь 2017 г. | Версия 1.0.8

no work Edge 1030

Alberto Montes
14 Июнь 2017 г. | Версия 1.0.8

I have 4 buttons. First is 'IND' which makes nothing for me. Then I can configure 2nd and 3rd buttons and the 4th is fixed to OFF. So for example I can program 'Day Flash' and 'Night Flash' (which is great) but...why cant program the other 2 buttons? As the light has 5 modes (Day-DayFlash-Night-NightFlash-OFF) would be great to have 5 instead 4 buttons or at least be able to configure 'IND' as well.

Ответ разработчика
21 Июнь 2017 г., TrekBicycles

Hello, Thank you for your review. I want to clear up the operation for you. The light control is intended to work with the automatic system on the Edge. The 'IND' says that your light network is set to Individual Mode. In this mode, the light control will only allow you to switch between the two programmed buttons and Off. If you switch your light network to be either AUTO or Hi-Vis, then you have the ability to use the two middle buttons as 'over-rides' to the system. To change the light network, go to the sensor menu for lights, and change network mode.

Adam Pirillo
9 Июнь 2017 г. | Версия 1.0.8

This app works fine and the interface is simple, but it is annoying that you can not easily switch between ALL the modes the light has available. You have to go into the menu and switch things. For example I'd like to be able to go from high medium low and flash but you only get two options and than you have to go into the settings to change the two options.

Pat Toher
16 Май 2017 г. | Версия 1.0.7

The user interface seems quite nice but does not function at all on my Edge 1000 (firmware 12.2). In addition to one Ion 800 headlight and two Flare RT taillights, I am also running Dura Ace Di2 9150 (newest groupset) with the EW-WU-111 D-Fly (also newest model D-Fly). The native Garmin light control works normally, albeit somewhat flakey and intermittent, but Bontrager's app continually displays "Forming Light Network" but it never does. It seems that third party apps and Garmin need more beta testing. -111 D-fly (also newest model D-Fly). The native Garmin light controls work normally, albeit somewhat flakey and intermittent, but Bontrager's app continually displays "Forming Light Network" but it never does. It seems that third party apps and Garmin need more beta testing.

Ответ разработчика
21 Июнь 2017 г., TrekBicycles

Thank you for taking the time to write a review. The 'forming light network' is actually coming from the Edge system itself, and the light control has to wait for that to finish before it can do anything. There have been a lot of updates in the last few months, so I would encourage you to try it again with the latest version of FW and build of the light control.

Kenneth Lenger
19 Апрель 2017 г. | Версия 1.0.7

The app itself seems OK, but it does not play well (or not at all) with other 3rd party apps. I've tried 3 different gear ratio apps and the Garmin Edge crashes with every combination of a 3rd party app + the Bontrager app. Trek/Bontrager: Any chance of fixing this?

Vicente Gomez
31 Март 2017 г. | Версия 1.0.5

Pienso como Franges. Dado que la mayoría de usuarios tenemos una sola luz, se podría configurar para que en el caso de solo detecte una, toda la pantalla este dedicada a ella, y así poner todos los modos para elegir

12 Март 2017 г. | Версия 1.0.5

muy buena !! estaria bien una app para el rada garmin varia!!

5 Февраль 2017 г. | Версия 1.0.4

Very cool app !

Phill Mai
1 Февраль 2017 г. | Версия 1.0.4

Set any data screen size to 1, then change the field to the app. It works perfectly!

22 Январь 2017 г. | Версия 1.0.3

je voudrais savoir comment fonctionne le systeme decelaration automatique

21 Январь 2017 г. | Версия 1.0.3

Esta bien, pero si solo tienes la luz delantera o la trasera, no debería aparecer en pantalla la que no tienes y así habría sitio para todas las configuraciones en pantalla

19 Январь 2017 г. | Версия 1.0.3

great app for great lights!

4 Январь 2017 г. | Версия 1.0.1

While there's not much wrong with a Transmitr remote, saving some grams by controlling lights from the Garmin is nice. Data field controls all Ion or RT together. For example I have 2 of each. Toggling option for Ion affects both front lights, same for RTs in the rear. One button and both front or rear lights switch modes. You can set which 2 pattern/brightness options you want available besides the unchangeable auto and off buttons. Battery status of each light is always on at top of display field. It takes up an entire screen, but the layout crams plenty of options and battery info without appearing too busy or cluttered and the separation between buttons is good.

29 Декабрь 2016 г. | Версия 1.0.0

Perfekt. So soll es sein!

Filipe Catarino
25 Декабрь 2016 г. | Версия 1.0.0

Para quem tem as luzes ion rt e flare rt este data field é Excelente!!! Funciona na perfeição

Извините, в настоящее время статистика недоступна.