Temps

Описание

A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.A Tempe Sensor is needed to see the Tempe dataIf you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58

Новые функции

0.19 - removed support fo vivoactive 3 devices, as the Tempe is no longer available to widgets on it.0.18 - added support for Oregon, Rino, and GPSMAP 66

Дополнительная информация

Первый выпуск: 6 апреля 2017 г.
Updated: 2 мая 2019 г.

Версия: 0.20.1

Связаться с разработчиком
Отметить как неприемлемое

Разрешения

Данному приложению требуется доступ к следующей информации:

данные датчиков (т. е. ANT+, частота пульса, компас)
Архивные данные по показателям частоты пульса, давления, температуры и высоты

Approach® S60
D2™ Bravo
D2™ Bravo Titanium
D2™ Charlie
D2™ Delta
D2™ Delta PX
D2™ Delta S
Descent™ Mk1
ForeAthlete® 230J
ForeAthlete® 235J
ForeAthlete® 630J
ForeAthlete® 735XTJ
Forerunner® 230
Forerunner® 235
Forerunner® 245
Forerunner® 245 Music
Forerunner® 630
Forerunner® 645
Forerunner® 645 Music
Forerunner® 735XT
Forerunner® 935
Forerunner® 945
fēnix® 3, quatix® 3, tactix® Bravo
fēnix® 3 HR
fēnix® 5, quatix® 5
fēnix® 5 Plus
fēnix® 5S
fēnix® 5S Plus
fēnix® 5X, tactix® Charlie
fēnix® 5X Plus
fēnix® Chronos
GPSMAP® 66i
GPSMAP® 66s / 66st
MARQ™ Athlete
MARQ™ Aviator
MARQ™ Captain
MARQ™ Driver
MARQ™ Expedition
Oregon® 7 Series
Rino® 7 Series
vívoactive® HR

Средняя оценка: (Отзывы: 38)

Написать отзыв

Yarik
9 мая 2019 г. | Версия 0.20.1

Очень полезное приложение для тех, у кого есть garmin tempe. Работает отлично на garmin fenix 5X plus.

John Paul Istre
30 апреля 2019 г. | Версия 0.20

Does not work on the Forerunner 235, and if it was not created to work on this device, then why would you create this widget to support it?

Ответ разработчика
30 апреля 2019 г., jim_m_58

The 23x doesn't have an internal temperature sensor, but as the description says, you have to have a Tempe for it to work with that, and I guess you don't..

Murray Keogh
2 января 2019 г. | Версия 0.18

Great widget Jim! Keep up the good work

Dušan Jurkovič
12 декабря 2018 г. | Версия 0.18

Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?

Ответ разработчика
13 декабря 2018 г., jim_m_58

Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.

Christopher Lawley
4 декабря 2018 г. | Версия 0.18

Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended

Ответ разработчика
4 декабря 2018 г., jim_m_58

Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.

Emanuel Chiculita
28 ноября 2018 г. | Версия 0.18

Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!

barry
30 октября 2018 г. | Версия 0.18

Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???

Ответ разработчика
31 октября 2018 г., jim_m_58

That's the version number of the app.

Alan Formstone
25 октября 2018 г. | Версия 0.18

Excellent. Exactly what i was looking for. Totally 5 stars!

Enrique Del paso
30 июня 2018 г. | Версия 0.17-upd3

On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...

Ответ разработчика
30 июня 2018 г., jim_m_58

The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.

Łukasz Tatys
29 июня 2018 г. | Версия 0.17-upd3

Great and simple

jsanchezi
25 июня 2018 г. | Версия 0.17-upd3

Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.

PERO.BS
1 мая 2018 г. | Версия 0.17-upd1

Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max

Simon
2 марта 2018 г. | Версия 0.17

Top

Jája 🇨🇿
13 февраля 2018 г. | Версия 0.17

Shows only Tempe temperature, Internal "Not Available", F3 HR.

Ответ разработчика
13 февраля 2018 г., jim_m_58

In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)

Natxo Baile
11 февраля 2018 г. | Версия 0.16.1

In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app

Ответ разработчика
11 февраля 2018 г., jim_m_58

The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.

DzoLoMartelet
2 февраля 2018 г. | Версия 0.16.1

Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.

Christian
28 января 2018 г. | Версия 0.16.1

Works beautifully on the Fenix 5X.

Nicole van den Heuvel-Voskuil
24 января 2018 г. | Версия 0.16.1

I have a vivo active 3 and the tempe sensore bt it won't show the temperate of the tempe sensor. Every thing is connected but it won't show :-( what i am doing wrong?

Ответ разработчика
24 января 2018 г., jim_m_58

Widgets time out very quickly on the va3, and the Tempe can take a minute to connect. Try again, but tap the screen every 15 seconds or so, as that resets the widget timeout.

andrej-svk
12 января 2018 г. | Версия 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
12 января 2018 г. | Версия 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
12 января 2018 г. | Версия 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

Labrie JS 🇨🇦
2 января 2018 г. | Версия 0.15-upd

Great app, since you can't make the tempe graph, can you show the Alt tempe reading in the last 2-3 hrs. Any thing to have spme king of history. If not can you show the max and low internal and external temperature for the last 24 hrs.

Bernardo1985
6 ноября 2017 г. | Версия 0.15-upd

Muy buena aplicación. Funciona bien sobre el Garmin Fenix 5X. Como punto a mejorar, realizar una representación del gráfico más visual y legible. Recomiendo

Mark Elbogen
8 октября 2017 г. | Версия 0.15

Great app. One question: is there a way to have a second graph which shows the graph of Tempe temperature as opposed to internal?

Ответ разработчика
9 октября 2017 г., jim_m_58

Since the widget only runs for a short time, it really can't collect the info to draw a graph for the Tempe. The internal data is collect by the Fimware, so that's easy to display.

JoseNG2
1 октября 2017 г. | Версия 0.15

Very good widget. Could you create one like this but only with pressure?

Извините, в настоящее время статистика недоступна.