12 de Novembro de 2019 | Versão 1.9.2
Very good data field. Can you please get the Elite Crono Fluid added? I have the following Speed and Virtual Power rating from Elite. Speed(KMH) Power 10,35 20,88 30,190 40,325 50,505
6 de Setembro de 2019 | Versão 1.9.2
I am getting very low power readings when going uphill (3-10%). I expect 150-180W based on Strava readings, but I am getting 10W or less. It looks like (bike+rider) weight (or grade) are being ignored altogether. I am using an Edge 520 plus (has barometer, not sure it uses it), and I have speed and cadence sensors.
Any ideas? Could it be that it does not work if I am using feet/miles/pounds instead of metric units?
11 de Julho de 2019 | Versão 1.9.1
great app, it would be perfect if the watt data from the app can generate an estimated IF or can be integrated in garmin connect like for who has a power meter. these data will complete the statistic graphs with a lot of useful data!
14 de Junho de 2019 | Versão 1.9.1
Hey Shane, keep up the good job! Excellent app you have developed!!! All the best, Mike
8 de Junho de 2019 | Versão 1.9.1
Sometimes data is erratic, and spiky a lot. I did'nt understand the reason, better the developer make a simpler version, calculating using the weight, speed, slope real-time.
7 de Maio de 2019 | Versão 1.9.1
Nice app: it let’s me know instantly about my power and stores them in the Garmin Connect that I can analyze later!! It may be not perfect but it solves all my necessities!! Good job!!
14 de Abril de 2019 | Versão 1.9.1
I had a lot of expectations, but it looks as if the (default) settings are incorrect. I have peaks of more than 1900W and a average of almost 400W. My FTP is not even 200W, so this is far from realistic. Is there something with the (default) settings that needs to be adjusted to get more realistic values?
Because I still hope it will work, I will rate it as "OK", but for now it does not work.
9 de Abril de 2019 | Versão 1.9.1
Great app..So..only a question...it's necessary imposted FTP value on device ?(Garmin Edge 520)..
29 de Janeiro de 2019 | Versão 1.9-upd3
Great app. i want to know if there is a chance to get the 20m value too.
23 de Outubro de 2018 | Versão 1.9-upd3
Best estimated power, is there a way to print on garmin connect best 20 min power??
13 de Outubro de 2018 | Versão 1.9-upd3
resultats correct jusqu a la derniere mise a jour. depuis en montée resultats tres bas et proche de zero. que se passe t il?
Jose Moreno 🇪🇸🇮🇨
8 de Outubro de 2018 | Versão 1.9-upd3
This application is useless.
26 de Agosto de 2018 | Versão 1.9-upd3
I thought at least this will be a good "live" estimate, especially going uphill but there must be some serious problems with the maths involved (or how data is provided by garmin). I would have liked the numbers displayed but strumbling around with 300 W on a recovery ride, pretty unrealistic...
I have a feeling that aerodynamic drag/rolling resistance is massively overestimated in standard configuration, e.g. going a bit downhill with no preassure on the pedals generated watt numbers around 250 W
To summarize: Better display hm/h and the gradient on your garmin to give you a feeling on how hard you are pressing the pedals, or get a powermeter...
22 de Agosto de 2018 | Versão 1.9-upd3
there ara some strange peaks on descents
11 de Julho de 2018 | Versão 1.9-upd3
app doesn't work on climb or anytime that the gradient change...on climb goes to zero on descent calculate too much watt...works better till some months ago...but now unuseful
7 de Maio de 2018 | Versão 1.9-upd
Warning MTB fans, this app is based on speed, so for guys like me, is not useful, I had a power of 280 watts descending and 15 watts in a steep climbing. No make sense for MTB.
Is clear that the programmer did an excellent job for other kind of bikes,Road, Triathlon etc.
5 de Maio de 2018 | Versão 1.9-upd
pas de resultats coherents sur fenix 3hr ,meme au dessus de 40 TOURS MINUTES RESTE A 0
17 de Abril de 2018 | Versão 1.9-upd
I use this with a fixed gear bike and Garmin 520. It seems like the app doesn't recognize the grade of hills: going uphill (low cadence, slower speed) I get pretty low power estimates. Going downhill (sometimes 140+ cadence and 30+ mph) vPower is 450w+. That's the opposite of the power meter readings on my other bike. The app seems pretty accurate on flats and low grades. Any thoughts?
13 de Abril de 2018 | Versão 1.9
Thanks for a great app, great service from developer. Data very accurate. Thanks.!!
1 de Abril de 2018 | Versão 1.8.3
Works just perfekt. Very nice app. Thanks!
28 de Março de 2018 | Versão 1.8.3
Works perfect. Gives a really good watt estimate on the ride, and all data is available in Garmin Connect afterwards. Great work :-)
25 de Março de 2018 | Versão 1.8.3
Now with the peaks corrected is the best of the bes iq app for estimated power thanks a lot you save me a powermeter!!
23 de Março de 2018 | Versão 1.8.2
I used to be quite happy with the data shown. But the new release with the “no cadence“ option does not make any sense at all. Is there a possibility to use the app without this nonsense?
Resposta do programador
24 de Março de 2018, Shane_Coetser
Sorry for that Stephan. The calculation should however work correctly if a cadence sensor is connected.
2 de Março de 2018 | Versão Version 1.8.1
Great for what it is, downloaded 5 different virtual power data field apps for my Fenix 3 hr, and tested against my Garmin power meter, and this was by far the most accurate and stable.
I just wish the data shown, could be uploaded to Connect with the rest of the ride data, is that even possible????
Resposta do programador
20 de Março de 2018, Shane_Coetser
There has been a few issues, but looks like data is now uploading to GC.
Jaime Martín Granda
13 de Fevereiro de 2018 | Versão 1.80-upd1
You also could match the values that calculate with BPM...
With BPM you have another way to calculale Power.
Maybe both inaccurate ways to calculate virtual power would be better tan one :) And decide if do an average or a weighted average towards one or another depending of the moment (Changes of bpms, altitude, cadence or so...)
As powercal, with a little TEST with a real power sensor at home (in the trainer) you could calibrate or ask for results to get BPM/power rates and so...
Then when going outside with any bike without power sensor, trying to estimate it better... In example for me at this moment, at constant efforts aprox:
167W - 115bpm
228W - 140bpm
274W - 159bpm
319W - 177bpm
365W - 185bpm