App Icon

Xert Workout Player

Descrição

Discover, Improve, Perform with Xert Breakthrough Training - Two Time Winner Best Connect IQ App Award!</p><p></p><p>The Xert Workout Player offers athletes the most advanced workout capabilities available on the market today. Xert's SMART workouts are the only system calculated, dynamically adjusting workouts. The system and players can determine your unique interval targets based on your fitness as of today and can also adjust across a variety of dimensions such as target power and interval duration *as you perform the workout* to improve the overall training you receive. Paired with Garmin Connect Mobile, the Xert Player logs in to Xert Online (www.xertonline.com), obtains your latest Fitness Signature, downloads your selected workout, configures the exact workout interval intensities and durations specific to you and then plays the workout using your power meter and/or smart trainer. With your smart trainer, it will do trainer control. If you have both a power meter and smart trainer, it will do powermatch and trainer calibration on-the-fly. The app also sends telemetry back to Xert Online so you can view your data online via the Xert Remote Player (https://www.xertonline.com/remote) and follow your workout progress. </p>

Novidades

Version 3.3 brings exciting new features that enable greater variety in your workouts including ramps, slope-mode (mixed-mode) and smart, dynamic power intervals based on target MPA that adjust their target power based on your fatigue at the moment. </p><p>Version 3.5 Workaround that addresses 3rd Party ConnectIQ datafields with Background Service conflicts.</p><p>Version 3.6 Improves access to more workouts using more Garmin Edge devices.

Informação adicional

Permissões

Esta aplicação requer acesso a:

  • Envie/receba dados através de rádio ANT para/de sensores de terceiros
  • Enviar/receber informações de/para a Internet
  • Ficheiros FIT (registos de atividade)
  • Gravar informações adicionais em ficheiros de atividade
  • Posição de GPS
  • Dados do sensor (por exemplo, ANT+, ritmo cardíaco, bússola)
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
Média de classificações: (51 classificações)

Jon Bekenstein
28 de Dezembro de 2018 | Versão 2.05

Fantastic workout player on the Edge 1000. The XERT workouts have helped me improve my FTP by more than 20% last year. But the power button broke on my 1000 and I have switched to the Edge 1030. Unfortunately, some (apparently not all) of the Edge 1030 devices freeze/stall with the workout player, and mine is one of them. I have 3 bikes with 3 different power meters and the problem occurs with all 3. Developer is working with me to trouble shoot. My old 1000 still works great indoors and outside (I use a paper clip to turn it on/off) with the XERT workout player. There seems to be some connectivity issue between the 1030 and the IQ Connect servers. The player freezes after an elapsed time reaches any number that ends __9:59. It restarts with reconnecting, but you will miss the intervals changing when it is stalled. I will update when this is resolved. I am using Public Beta 6.46 firmware. Same thing happened with the official 6.30 firmware. UPDATE: It turns out that using XERT workout player with Stanislav Bures' My Edge2 on the device causes the problem. Both data fields use Background Services, and maybe My Edge2 uses Background services even when it is only loaded and not just when it is running. Maybe Stanislav can fix that. All is great in the universe of XERT, though I also like My Edge2.

Justas Mažuolis
10 de Dezembro de 2018 | Versão 2.05

I have edge 820, started the smart workout - "Hot blooded-2" and after few minutes it freezes the display. you can pause workout or select trainer menu, but in the main workout window all data some king stopped and did not change. i dont know what to do, tried reinstall app several times. :(

Resposta do programador
10 de Dezembro de 2018, Xert-BaronBiosystems

If you're not using a power meter for powermatch, configure the trainer on the Garmin sensors menu. If the Garmin works with your trainer natively, it should also work without issue in the app.

Roland Philipp
24 de Outubro de 2018 | Versão 2.05

Love the app. Used it with my Edge 1000 without any problems. However, I switched to Edge 1030 and the app keeps freezing after a few minutes. Same problem after re-starting the app or the unit and also after re-installing the app.

Resposta do programador
24 de Outubro de 2018, Xert-BaronBiosystems

Hi Roland, Kindly send an email to our support group at [email protected] with some details (username, workout you are using) and we can help troubleshoot. Cheers.

Steve Waterhouse
3 de Setembro de 2018 | Versão 2.03

Great info but Images and #'s are way too small for use while riding outside.

Tex/Edgar Nielsen
7 de Agosto de 2018 | Versão 1.81

Trying this out, seems like it has a bug with the Edge 1030 at least where it doesn't save the GPS data when one is done. On the forums this was mentioned as a possibility, and I have now verified by doing a few attempts. This results in missing data on Xert, let alone connect/strava, etc. Still trying to track down more info on this.

Resposta do programador
20 de Agosto de 2018, Xert-BaronBiosystems

This has been determined to be a firmware issue that is being looked at by Garmin. We hope to see it addressed in a subsequent firmware release.

Fabrizio Rigout
7 de Junho de 2018 | Versão 1.81

I do not have a power meter and my trainer is "dumb". I tried to input figures in the Resistance submenu on my Edge 520 to have Xert calculate watts from speed/cadence/resistance in the same way that Zwift does. However, clicking on Resistance takes me back to the main screen. Is that to be expected? Does Xert not produce derived watts?

Resposta do programador
8 de Junho de 2018, Xert-BaronBiosystems

The player currently only supports devices with real power data - smart trainers and power meters.

Javier Carrion
31 de Maio de 2018 | Versão 1.81

No funciona de buena manera en Garmin 1030 Al guardar los datos no muestra velocidad, distancia y metros ascendidos.

Resposta do programador
1 de Junho de 2018, Xert-BaronBiosystems

Garmin is aware of this issue with the 1030. We hope to resolve it shortly.

Francois CM
14 de Maio de 2018 | Versão 1.8

Amazing app for inside training but no as good for outside. I am still trying to find something to train outside with with xert training and my garmin.

Francois CM
14 de Maio de 2018 | Versão 1.8

Amazing app for inside training but no as good for outside. I am still trying to find something to train outside with with xert training and my garmin.

Monika Jäger
21 de Março de 2018 | Versão 1.8

Does not Work with my tacx neo. There is no resistance control at all.

Resposta do programador
21 de Março de 2018, Xert-BaronBiosystems

Hi Monika. If you could kindly send an email to [email protected] It absolutely does work with the Neo. We can help you.

Lok Chai
24 de Fevereiro de 2018 | Versão 1.6

Works great!

Scott Steele
9 de Janeiro de 2018 | Versão 1.6

Great app! Xert is the best platform out there for cyclists that really want to push their limits!

Deon Kretzschmar
18 de Julho de 2017 | Versão 1.3e

Will this work with a Cycleops Pro 400 indoor bike?

Resposta do programador
31 de Julho de 2017, Xert-BaronBiosystems

Check to see if it support ANT FE-C protocol. If so, then it should work fine.

Lok Chai
29 de Maio de 2017 | Versão 1.3c

If you have a power meter, this is the first thing to get and train hard with predictable results.

teissonj
20 de Abril de 2017 | Versão 1.3c

Works well except that speed doesn't go through in Strava then speed is not synchronized in Xert online (with EDGE 520)

Nazar
31 de Março de 2017 | Versão 1.3c

Does this work with kinetic inride?

Resposta do programador
31 de Março de 2017, Xert-BaronBiosystems

Unfortunately, the Garmin Edge devices only connect to ANT+ trainers and Kinetic do not support the ANT+ standard. Our app relies on this connectivity.

brmacdonald
22 de Fevereiro de 2017 | Versão 1.3a

Xert is the best tool for improving your cycling fitness. Period.

Michael Strömgren
12 de Fevereiro de 2017 | Versão 1.2e

Xert is by far the best trainer system I've trained (and I've tried a couple) and this app does the trick so serve you custom training sessions tuned to your fitness goals.

Łukasz
11 de Fevereiro de 2017 | Versão 1.2e

If I could install only one app on my Edge 520, it would have been Xert Player!

Hans Knol
10 de Fevereiro de 2017 | Versão 1.2e

Xert has improved my fitness and will improve yours with its ability to know what you can do. Xert Workout Player is a fantastic tool!

den_om
2 de Fevereiro de 2017 | Versão 1.2c

looks cool...does it work with tacx neo? seems to read data but not control the trainer?

Resposta do programador
3 de Fevereiro de 2017, Xert-BaronBiosystems

Yes. Perfectly. Will control the trainer in erg mode or resistance mode.

the5krunner
30 de Janeiro de 2017 | Versão 1.1e

awesome. great work guys

Declan Makk
29 de Janeiro de 2017 | Versão 1.1e

WAAAAYYY better than TrainerRoad.

Ainda não estão disponíveis estatísticas.