App Icon



Configurable data field. </p><p>=================================</p><p>How to apps setting:</p><p></p><p>=================================</p><p>Do you like it? You can support my work with a small donation.</p><p>=================================</p><p>Thanks Bradford Herder for the amazing youtube video


V 1.7.3 - According to the LOG files, the app was crashing to display the heart rate zones. I believe this update already fixes this bug.</p><p>V 1.7.4 - The update this time is for Edge Explore 2. There have been a few crashes in the LOG due to lack of memory. According to the simulator, the application is taking up 80kB of the 124.5kB, so I am unable to do more in this regard. Maybe Garmin should check the firmware of their devices and prevent similar crashes</p>

Informação adicional


Esta aplicação requer acesso a:

  • Envie/receba dados através de rádio ANT para/de sensores de terceiros
  • Executar em segundo plano quando não está ativo (potencialmente afetando a vida útil da bateria)
  • Gravar informações adicionais em ficheiros de atividade
  • Posição de GPS
  • Dados do sensor (por exemplo, ANT+, ritmo cardíaco, bússola)
  • O seu perfil de fitness do Garmin Connect™
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 1040 Edge® 1040
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 540 Edge® 540
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® 840 Edge® 840
  • Edge® Explore Edge® Explore
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 2 Edge® Explore 2
  • Edge® Explore 820 Edge® Explore 820
Média de classificações: (346 classificações)

Marc Anthony Ouwerkerk
2 de dezembro de 2023 | Versão 1.7.8

Just Installed "my edge2 " on my edge 1030 (not plus) haven't used it yet but my Question is speedometer shows your speed in miles is there anyway I can set it to metric system KILOMETRER(s) instead of MILE(S) any info is welcome

Michael Charbonneau
17 de novembro de 2023 | Versão 1.7.8

Mostly great. The wind data was a bit confusing when it first appeared. Sometimes it did not jibe with the separate Wind Field data field. If fact I wasn't sure where this app was getting their data from. I guess it's from default weather app on my edge 830, though that app has significant issues with refreshing or even loading data from my phone. I wish there was a way to set data sources. I can tell that this is ongoing effort so I look forward to further development. Thank You for the great work!

Nando Rguez
12 de novembro de 2023 | Versão 1.7.8

Se puede cambiar El idioma?

Daryll George Dacayana
1 de novembro de 2023 | Versão 1.7.8

how to install?

Dascalu Cristian
22 de outubro de 2023 | Versão 1.7.8

Can't even instal it on Garmin Edge 1040 ! ... so useless.

Francisco Miguens Portero
10 de outubro de 2023 | Versão 1.7.8

No funciona con edge 1040

3 de outubro de 2023 | Versão 1.7.8

How do I get the temperature and HR measures on this app? Both are blank. Love it otherwise.

Karl Bruck
29 de setembro de 2023 | Versão 1.7.8

Für mich eine der besten! Läuft auf meinem Garmin 830 absolut stabil.

Herman ten Bruggencate
28 de setembro de 2023 | Versão 1.7.8

Before installing Garmin 1040 FW 18.23 the My Edge2 datafield working fantastic. After installing FW 18.23 and later FW 18.25 it crashed during cylcing and Garmin 1040 crashed also. Reinstalling My Edge2 datafield don't work. Anyone suggestions?

Francesco Marchitelli
21 de setembro de 2023 | Versão 1.7.8

I can't remember my last time cycling with no MyEdge running. It simply a fantastic DataField/App. But now, on the Garmin 1040 (FW 18.23) MyEdge interferes negatively, inhibiting the Garmin to reconnect to (all) Sensors after the StandBy/Sleep mode (used e.g. for a lunch break or similar). If I deinstall MyEdge the Garmin works perfectly - If I reinstall MyEdge the sensor connection issue after sleep mode is here again.

16 de setembro de 2023 | Versão 1.7.8

The app works great. Only if you choose automatic browsing of the fields, the commas on the bottom edge overlap the numbers a little.

Willem Hegeman
30 de agosto de 2023 | Versão 1.7.8

Screen in Night mode!

Tomáš Nagaj
25 de agosto de 2023 | Versão 1.7.8

Love it! Use it as my default screen on Edge 1040 Solar.

Andrew Nicol 🏴󠁧󠁢󠁳󠁣󠁴󠁿
8 de agosto de 2023 | Versão 1.7.8

best data field, so much information without being to hard to digest whilst riding. 1 gripe is the power meter - when setting the power meter to the analogue dial I would have liked a lower setting for the max, just now the needle hovers over the avg reading which is annoying

1 de agosto de 2023 | Versão 1.7.8

impossible d'ouvrir l'app avec le 1040

28 de julho de 2023 | Versão 1.7.8

Fonts for current time, avg and max speed could be bigger.

Petr Procházka
25 de julho de 2023 | Versão 1.7.8

Very good

Roman Štarha
20 de julho de 2023 | Versão 1.7.8

I can't install to Edge Explore :(

Christian Eidensten
18 de julho de 2023 | Versão 1.7.8

The best ever,clean and all the info i need on a Ride!

16 de julho de 2023 | Versão 1.7.8

Dla mnie rewelacja. Używam n Edge 830. Działa niezawodnie. U mnie zawsze na pierwszym ekranie przy jeździe rowerem.

Rom Fettes 🇱🇺🥊🚵🏼‍♀️🐕
30 de junho de 2023 | Versão 1.7.8

best Dashboard ever. Only downside it crashes frequently, and needs to be resynced through puggin the Edge device into the Laptop. Usually it happens while in holidays, and I don't have the LAptop with me. I read in the release notes it could have to do with Garmin's memory allocation. On the other hand other Dashboards like the SPH Graph do not crash! Please, please fix it :-)

Michael Owen
29 de junho de 2023 | Versão 1.7.8

I love this dashboard. I've tried some of the others but I keep coming back to this one. On super long rides I have also noticed that the datafield can crash, but I have a workaround of duplicating that activity profile on the garmin and swapping to that activity profile when it does crash and then I have a working dashboard again without interrupting my ride or loosing any data. I hope this can be fixed but I've noticed the ride needs to be in excess of 4 hours before I have a problem. One request would be to support a field for left/right power meter balance for those of us with dual sided power meters.

Hans Koolen
26 de junho de 2023 | Versão 1.7.8

Last Sunday only the IQ logo crashed on the screen and then all IQ screens stopped working. And this is not the first time, it has been happening since April. Anyone suggestions???

Don Sergio
16 de junho de 2023 | Versão 1.7.8

this is the best program for my edge 1040 solar cycling computer!!! the only thing missing is the di2 transmission's battery level screen. and so everything is mega super!

David Lupomesky
1 de junho de 2023 | Versão 1.7.7

Velice zdařilý doplněk. Graficky perfektní a přehledné. Všechny důležité informace na jedné obrazovce. Možnost změnit údaje dle potřeby. Možná jen by to chtělo časový filtr na měření % stoupání - moc rychle se mění hodnoty. Jinak super! Děkuji.