A running power estimator using pace and gradient based on Manetti et. al. (https://www.ncbi.nlm.nih.gov/pubmed/12183501). The running power is saved to FIT. Note that GPS-calculated elevation may have major distortion and affecting Run Power results.</p><p></p><p>Example: Running 95 minutes and burning 1400cal. 1400 * 4184 / (90 * 60) gives an average of 1084.7 Watt .</p><p></p><p>Settings:</p><p></p>
V 3.3.2</p><p></p><p>Add new supported watches</p><p>Upgrade to SDK 3.2.5</p><p></p><p>V 3.3.0 </p><p></p><p>Upgrade to SDK 3.2.3</p><p></p><p>V 3.2.4.</p><p>Upgrade to SDK 3.2.2. Added newest watches.</p><p></p><p>V 3.2.3</p><p>Upgrade to SDK 3.1.7. Added newest watches.</p><p></p><p>V 3.2.0</p><p>Upgrade to SDK 3.0. Different float parsing for user settings. </p><p></p><p>V 3.0.0</p><p>Upgrade to SDK 2.4.4</p>
Esta aplicação requer acesso a:
Anciano
15 de Fevereiro de 2021 | Versão 3.3.0
Zoran Luković
6 de Fevereiro de 2021 | Versão 3.3.0
Tisztul_A_Visztula
7 de Janeiro de 2021 | Versão 3.2.4
It’s time to correct it :-) “ Example: Running 95 minutes and burning 1400cal. 1400 * 4184 / (90 * 60) gives an average of 1084.7 Watt .” Instead of 90 it should be 95. To be honest I spotted it when I first downloaded the app years ago, but was curious whether any other users highlights it or not. Shame on them for not doing that, and shame on me for the test.
Noginho
31 de Dezembro de 2020 | Versão 3.2.4
I don't exacly understand, when i'm running i should set 24% of efficency? Or 100%?
Kuba
29 de Dezembro de 2020 | Versão 3.2.4
Hi, thanks for super data field. But i need to rise my power.. What should i change in the settings?
diegoruner
4 de Novembro de 2020 | Versão 3.2.4
I not understand that number i have in the AVERAGING TIME OF PACE and DISTANCE FOR GRADIENT. What number should for me? thanks
Resposta do programador
4 de Novembro de 2020, tmatthey71
AVERAGING TIME OF PACE : the time interval the pace is average over. Longer interval more smooth pace and short more respossive, but more unstable due to measurements fluctuating. DISTANCE FOR GRADIENT : The distance the calculate the gradient. gradient = distance / elevation difference
Erik Schoob
1 de Outubro de 2020 | Versão 3.2.4
Sadly the data field shows me only a timer on my FR945. Additionally there is no data recorded regarding running power
Lee Tze Kirk
29 de Setembro de 2020 | Versão 3.2.4
1st go at the app. Muz say it looks good! I can see the power data on garmin connect but does not show up on Strava. Would be great if can be displayed on Strava!
CCA
28 de Julho de 2020 | Versão 3.2.3
Great app and simple way to have run power estimation without other device. After reading the Manetti et. al article an prorun.nl review I wonder if possible to have excel/Google sheet to calculate run power estimations for past workouts? Thanks.
Resposta do programador
28 de Julho de 2020, tmatthey71
Thx! This should be possible with Excel. You'll need to extract distance, time, (pace or speed,) and elevation into Excel. The changeling part is to find current velocity and gradient to be smooth enough, but still capturing the details. For the gradient you can use Excel linear regression and for velocity a window average over 10-30s. Doing this as post process you can get more accurate velocity and gradient values, since you look ahead, which my data field cannot. Then use Minetti.
John L. TTW
26 de Junho de 2020 | Versão 3.2.3
Excellent ! Thanks for this app ! Where is possible to see avg power by circuit in Garmin connect... ? Impossible for me to find that.
Forest Runner
28 de Maio de 2020 | Versão 3.2.3
Aplikacja super. Mam tylko pytanie odnośnie bardzo dużych różnic w wskazaniach mocy w porównaniu do Garmin Runnig Power. Tam są zdecydowanie większe wskazania mocy. Nie wiem teraz która aplikacja daje rzetelniejszy odczyt..
ANGEL GARCINUÑO PACHO
24 de Maio de 2020 | Versão 3.2.3
HOLA Me podrias explicar si puedes en español que son: Averaging time interval of pace Distance frequency Efficiency Gradient averacing factor para poder power los datos adecuados a mi Gracias
Wesley De Almeida Junior
17 de Maio de 2020 | Versão 3.2.3
Excellent App. Easy to use. It would be interesting to correct the 20% variation detected in the revirew.
Bob
16 de Maio de 2020 | Versão 3.2.3
Great idea. Can you list the defaults in the description on connectiq, I'm not sure if I changed them or not from having it previously installed. Also, possible to have a treadmill mode? Maybe allow user to enter treadmill grade option or default to 1%.
Adam Jakab
4 de Maio de 2020 | Versão 3.2.3
Hey! Thanks! This is really good. I wanted to have a look at the power estimation algorithm but the Bitbucket source code repository seems to be private. Is that intentional?
Ryan S
6 de Abril de 2020 | Versão 3.2.3
Really great data field. I don’t have a Stryd, but I’ve always wanted to be able to train with power. This seems like a good way to do that without spending hundreds of dollars on power meters. As with some of the other reviews, I would only ask for a couple of extra features: 1) Average Power 2) Some mechanism for setting a target power range 3) The ability to export the power data to partner apps Again, this is an AWESOME data field. I’d high recommend it!
Tisztul_A_Visztula
4 de Abril de 2020 | Versão 3.2.3
Still love it. 2 questions: A) if I use a footpod speed/pace data to be averaged come from there, right? B) Is grade calculated by the data field from elevation change and distance change or does the data field directly take the grade calculated by the watch?
Gean Gustavo Brum
9 de Março de 2020 | Versão 3.2.3
Great App. One thing would be usefull: When you export the fit file the epower could be exported to. At the present moment, when you export the activity, this data is not attached.
Marian Chicu
17 de Fevereiro de 2020 | Versão 3.2.3
it's brilliant! I ran a couple of times with a Stryd (the v2 - hr strap) and the numbers it showed are not far at all! yes, highly recommended!
Pieter Oosthuizen
6 de Fevereiro de 2020 | Versão 3.2.2
Hello! Can you open compatibility for the Fenix 6 series please? (I have used it on my previous watch - 645, and would like to continue with it) Thanks
Justin Mayfield
17 de Janeiro de 2020 | Versão 3.2.2
Tom
18 de Dezembro de 2019 | Versão 3.2.2
Pieter Oosthuizen
14 de Agosto de 2019 | Versão 3.2.2
Hello! Downloaded and did one run with it :) Do I need to adjust the 'Efficiency' from 24% to 100% for running or can I keep the default? Ref: 'Efficiency: Setting to 20-24% gives you approximately similar power out as for cycling, where as 100% is the energy you burn during running.'
Ainda não estão disponíveis estatísticas.