POWER EDGE FIELD is a Zones Based Multi Field for climbing and time trial specialists, performance and racing, with Estimated Power Calculations with a 20 variable algorithm similar to strava, using GPS, Cadence and Speed Sensor, Wind speed and Air Density, Rolling resistance and Air Drag Coefficients, When Power meter is not present, With 10% Margin Error tested with a Garmin Vector, compatible with Strava, WKO5, Training Peaks and Golden Cheetah, for extended info visit web site https://sites.google.com/view/powerbikepro/home</p>
2.0.0 Initial Realase</p><p>2.1.0 Calculated Power add</p><p>2.2.0 Acceleration is now on lap speed</p><p>2.3.0 Zones Colors Fixed</p><p>2.3.8 Updated to SDK 3.1.4</p><p>2.4.0 Uses Profile Weight and Height for estimated power calculations</p><p>2.4.1 Grade Add</p><p>2.4.8 No Zones option to save memory</p><p>2.5.4 Black Background Add</p><p>2.5.5 Max/Min Speed Add</p><p>2.6.0 Speed Zone Optimised</p>
Esta aplicação requer acesso a:
Ryonma
19 de abril de 2022 |
Versão 6.5.9
Que diferencia hay entre las diferentes versiones de esta app??
Marcin Kamiński
13 de março de 2022 |
Versão 6.5.5
Hello. Great application. I have an edge 530 and I don't know how to change the data fields.
Luis M
12 de outubro de 2021 |
Versão 6.0.7
Me gusta esta claro ci los datos muchas veces no son exactos sobretodo cuando vas a rueda pero en subida una subiendo solo me vale. Mucho de referencia..aunque algunos valores no se ni aque se refieren una breve referencia no estaría mal
Anand Prakash
2 de julho de 2021 |
Versão 5.8.4
Xavierbv
29 de maio de 2021 |
Versão 5.6.5
Parece muy buena aplicación pero me da unas cifras muy altas. Por ejemplo he sacado una media de 214w cuando por mi experiencia con potenciómetros hubiese sacado aproximadamente unos 150w. No sé si hay manera de poder corregirlo dentro del apartado de configuraciones.
Francesco F.
2 de maio de 2021 |
Versão 5.6.1
Hello can you please create a version of this app replacing calories and wind direction with distance and timer, as it used to be? On my Edge 530 the dynamic fields don't work. Thank you very much for this.
Owen Llewellyn
28 de março de 2021 |
Versão 5.6.0
Whilst data are liable to be only approximate compared to more direct measures of power output, as a relative measure of personal of performance it is very good. The cPower reading lags by a few seconds- most noticeable after starting to pedal (after a bit of freewheeling, say) but the lag seems less than 5 seconds. It would be nice to be able to customise the data fields but it seems this isn't possible due to design constraints. It may not prove to be as accurate as a full blown power meter but what do you want for the [optional] price of a cuppa. Will definitely continue to use and evaluate.
Maximo Santillan
8 de março de 2021 |
Versão 5.5.8
Estoy probando en lo que es depósito excelente pero también quiero probar con esta aplicación
Miguel Martínez Laureano
16 de fevereiro de 2021 |
Versão 5.5.7
Genial y maravillosa ...simplemente la mejor. No hay otra igual .
Henryk Lazar
5 de janeiro de 2021 |
Versão 5.5.0
Distance and time disappeared in the last version? Why? Is it possible to revert to an earlier version? Garmin Edge 530.
Gerry Kluck
16 de dezembro de 2020 |
Versão 5.4.6
Very nice app. Thank you. I've been using it for quite some time now w/ my 520 Plus. Recently it seems that the layout has changed; swapping out elapsed time and putting in calories, and swapping out distance and putting in heading. I would say for many of us who ride regularly on familiar roads, these new fields are not important. Can I revert back to the original layout somehow, or is there another "Power Bike" app that you have made that I should be installing instead?
Resposta do programador
16 de dezembro de 2020,
xuxumatu
Thanks for the review, sorry for the inconvenience, i had to put heading and wind to improve power calculations but you can change to Power Bike Lite or use both, these are also free. here is the link: https://apps.garmin.com/en-US/apps/25148221-d7f4-4cbc-a51d-1382f79f2f43
Isra
7 de dezembro de 2020 |
Versão 5.4.4
Otra pregunta que tengo es que, en mi caso que tengo un Garmin Edge 530 señalas el uso conjunto de Power Bike Field + Power Edge Lite, los dos en la misma pantalla en 2 campos, en campos separados? por qué el uso conjunto? disculpa la pregunta y muchas gracias por todo!!
Gaby Vera
15 de novembro de 2020 |
Versão 5.2.0
Absolutely the best app in store, i don´t know why has very few downloads but it´s great thanks a lot!
Francesco F.
15 de novembro de 2020 |
Versão 5.1.9
Potentially a great app, but dynamic data fields don't work on my Edge 530
Jacek
15 de agosto de 2020 |
Versão 4.8.1
The application is great, the measurements seem to be reliable, I have a question, what is `a power seconds` is factory set to 30, can it be changed? what will be the consequences?
Joxerra
3 de agosto de 2020 |
Versão 4.7.3
La aplicación tiene buena pinta, pero hay algo que no entiendo, ¿qué significan A power y C power? ¿Qué diferencias hay entre ambas?
Mario Perez
5 de julho de 2020 |
Versão 4.6.1
Mis felicitaciones al autor por esta genial app. Es, sin duda, la mejor app para estimar los valores de potencia de todas las que he probado. Me gustaría proponerles para futuras versiones, la posibilidad de poder ajustar los datos de potencia mostrados entre W y W/Kg. (Entiendo que la variable Kg puede ser tomada del perfil de usuario). Reitero,mis felicitaciones!
gary zimmerman
14 de junho de 2020 |
Versão 4.4.1
This is an awesome datafield, and very nice to have a estimated power calculation without a meter. Is there an assumption for bike weight? Or is that assumed to be included in the Garmin Connect Profile weight?
Joe
2 de junho de 2020 |
Versão 4.3.6
Installed the App on my Garmin 520 and used on this morning's ride. It's great to get power info without forking out for an expensive power meter accessory. (Yes, may not be 100% accurate - but suits me fine - I'm no pro). Would be great to be able to set the amount of fields to be displayed. My eye sight is not what it used to be and I find the smaller characters/numbers are sometimes difficult to read. But I'm not taking anything away from the great app and excellent work by the developer. Many thanks.
Omar Humberto Gómez Orozco
1 de fevereiro de 2020 |
Versão 3.8.9
This is a truly wonderful app! It looks so good and it is so finely designed. just change to dynamic color zones hidden feature, They are amazing and help. I highly recommend it.
Maurizio
19 de janeiro de 2020 |
Versão 3.8.4
Maurizio
17 de janeiro de 2020 |
Versão 3.8.1
I've been trying this data field for a few days and I'm very satisfied with it, everything works great, one of the best definitely, but I would suggest to the developer if it was possible to insert the power at 3 seconds. Thank you for your excellent work
Resposta do programador
17 de janeiro de 2020,
xuxumatu
thanks for the review!! real power or cPower?? I got another app called power bike pro that is just a one field, but you can choose the estimated power average seconds. if that's not the case, I´ll try to put seconds average on this app, thanks a lot.