A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>
0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66
Esta aplicação requer acesso a:
Alan Formstone
25 de Outubro de 2018 | Versão 0.18
Enrique Del paso
30 de Junho de 2018 | Versão 0.17-upd3
On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...
Resposta do programador
30 de Junho de 2018, jim_m_58
The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.
jsanchezi
25 de Junho de 2018 | Versão 0.17-upd3
Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.
PERO.BS
1 de Maio de 2018 | Versão 0.17-upd1
Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max
Jája 🇨🇿👣
13 de Fevereiro de 2018 | Versão 0.17
Shows only Tempe temperature, Internal "Not Available", F3 HR.
Natxo Baile
11 de Fevereiro de 2018 | Versão 0.16.1
In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app
DzoLoMartelet
2 de Fevereiro de 2018 | Versão 0.16.1
Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.
Nicole van den Heuvel-Voskuil
24 de Janeiro de 2018 | Versão 0.16.1
I have a vivo active 3 and the tempe sensore bt it won't show the temperate of the tempe sensor. Every thing is connected but it won't show :-( what i am doing wrong?
andrej-svk
12 de Janeiro de 2018 | Versão 0.16
Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!
andrej-svk
12 de Janeiro de 2018 | Versão 0.16
Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!
andrej-svk
12 de Janeiro de 2018 | Versão 0.16
Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!
Labrie JS 🇨🇦
2 de Janeiro de 2018 | Versão 0.15-upd
Great app, since you can't make the tempe graph, can you show the Alt tempe reading in the last 2-3 hrs. Any thing to have spme king of history. If not can you show the max and low internal and external temperature for the last 24 hrs.
Bernardo1985
6 de Novembro de 2017 | Versão 0.15-upd
Muy buena aplicación. Funciona bien sobre el Garmin Fenix 5X. Como punto a mejorar, realizar una representación del gráfico más visual y legible. Recomiendo
Mark Elbogen
8 de Outubro de 2017 | Versão 0.15
Great app. One question: is there a way to have a second graph which shows the graph of Tempe temperature as opposed to internal?
JoseNG2
1 de Outubro de 2017 | Versão 0.15
Very good widget. Could you create one like this but only with pressure?
Andrew Cotter
28 de Setembro de 2017 | Versão 0.15
Installed it on my Fenix 3 and internal temp showing not available. Any suggestions?
Nathan Kofahl
27 de Setembro de 2017 | Versão 0.15
Well done. This solves the problem of having a Tempe paired but not connected which makes the standard temperature widget useless.
KYS
13 de Setembro de 2017 | Versão 0.15
This is great app!!! I have some question. I use vivoactive hr. Internal temperture displayed. But Tempe display 'None paired'. Plz solve this problem!
thr4
10 de Agosto de 2017 | Versão 0.14-upd
Works very well and addresses a gap in watch native functionality (ability to see internal sensor temperature data when tempe is paired). Minor suggestion: allow customization of the date field (from MM/DD to DD/MM etc.) and UI cleanup (don't show version number on main widget screen as it doesn't really carry relevant information).
Lonely rolling
8 de Maio de 2017 | Versão 0.11
It's so simple widget that I love it so much. Temperature is a plain data that I always wanna know sometimes somewhere. Thank you.
Ainda não estão disponíveis estatísticas.