iRpz ®
7 de Outubro de 2018 | Versão 2.64
Esta aplicación cuenta los pasos?
Resposta do programador
7 de Outubro de 2018, jim_m_58
On devices that track steps, it shows steps on the same screen where calories are displayed. Edge devices don't track steps, and on others, Activity tracking must be on.
Change screens with up/down buttons or swipes to see the different screens
Timothy Tang
2 de Outubro de 2018 | Versão 2.64
Sorry, the "GPS" option is not displayed in "Settings".
Resposta do programador
2 de Outubro de 2018, jim_m_58
That's not available in any CIQ device app. The way it works, is it uses the setting from the last native app you used. It's nothing with Hike2 itself. Please use "contact developer" (on the right) for questions like this instead of leaving reviews.
Chander Mishra
21 de Setembro de 2018 | Versão 2.63
Good app as per reviews however not able to locate option to switch on GPS. I have tried means available but not able to do it.
Resposta do programador
21 de Setembro de 2018, jim_m_58
Hike2 turns on GPS itself. If you are seeing a delay getting GPS, start something like the native run app, and wait for it to "go green". It shows better progress in getting a fix than is possible in CIQ.
Rolland
19 de Setembro de 2018 | Versão 2.63
I've installed app on VA3 and it works perfectly. Big thanks to the developer. It has everything i expected and even more
Allamerican2529
9 de Setembro de 2018 | Versão 2.63
Great hiking app, best one imo available. Only complaint is when I sync the watch to the phone app, the hiking activity doesn't show up anywhere in the phone app so you won't have a history of your previous hikes.
Resposta do programador
9 de Setembro de 2018, jim_m_58
It should show up under "all activities" on your phone (Activities,All Activities) Hiking doesn't have it's own category like Walking, Running, Cycling do. That's a decision by Garmin.
Beniamin
31 de Agosto de 2018 | Versão 2.62
Awesome app
Rnny
29 de Julho de 2018 | Versão 2.62
why do I not receive notifications, missed calls or what's apps while recording. With the original Garmin Apps it works perfectly, but yours is not showing anything...
Resposta do programador
29 de Julho de 2018, jim_m_58
Please use "Contact Developer" and supply info such as the device you have and it's firmware version. There also is an about in the settings for most devices for what type of notifications you want to see while in an activity, so check on that. Are you sure your phone is connected at the time (see what the phone says)
RobbieYo
27 de Julho de 2018 | Versão 2.62
I wanted an app for hiking that showed plenty of details about the hike, was not complicated to use and provided reliable data. Well Hike2 does all of that and has the added benefit of being free! Pretty surprising for an app of this quality. It’s been working great on my VA3. I was also pleasantly surprised by the quality and speed of the support. I asked them several different questions and they were all answered within a few hours. I highly recommend this app and this developer.
RoNNoS
25 de Julho de 2018 | Versão 2.62
Gute Wander App. Würde eine deutsche Übersetzung gut finden. Autopause gibt es wohl keine?
Luciana Vieira
20 de Maio de 2018 | Versão 2.53
I used it for a 13-day walk and it worked perfectly fine! Everything you need!
edmasamo
4 de Maio de 2018 | Versão 2.53
I like the latest review, however - I noticed that the floors climbed vibration comes up quite a lot! It didn't used to do it as much, is there any way to adjust/customize how often it vibrates? or to turn off the vibration for floors climbed? It feels like a bit too much.
Thanks
Resposta do programador
5 de Maio de 2018, jim_m_58
That happens when the firmware thinks there was a floor up or down. While in Hike2, there is a general setting for vibrations/tones, there's not one that specific to each type of message like this. In settings, you can turn off "Dot for Floors" and this will also turn off the message for floors (and their location on the chart), but the count will still show on the floor/intense minutes screen.
Peter Johnson
27 de Abril de 2018 | Versão 2.53
Everything you need for serious walking without gimmicks or flashy graphics. Works well on FR645.
Helmut
24 de Abril de 2018 | Versão 2.53
Tolle App verwende sie sehr häufig Höhenmessung sehr gut und auch die anderen Funktionen sehr gut nur wieder so
Gus
28 de Março de 2018 | Versão 2.52
Отличное приложение! Сегодня протестировал. Впечатления самые лучшие. Спасибо за труд! Удачи Вам!
HGK 柯浩天
26 de Março de 2018 | Versão 2.52
Lots of useful info, good presentation, many customization options.
donP73
23 de Fevereiro de 2018 | Versão 2.50
Good revision in the last version!
I would ask: there's a way to enable/disable GLONASS mode?
Resposta do programador
23 de Fevereiro de 2018, jim_m_58
That's based on what was last used in native apps (like running), and isn't something I can do from Connect IQ.
michaelyu2011
28 de Janeiro de 2018 | Versão 2.14
Great app. I have used it for more than one year on my va hr. Recently, I noticed that the lap function is not available. Not sure, if you removed it or it would not work on the device.
Resposta do programador
28 de Janeiro de 2018, jim_m_58
There is auto lap function that is off by default, and the lap key itself is used to mark waypoints.
donP73
28 de Janeiro de 2018 | Versão 2.14
Hike2 is my favourite app.
It ha s only one defect, imho:
It would be a good thing if - when we pause - we can have a
summary scrolling screen and below (pushing "down" button) the three options:
1. Resume
2. Save
3. Resume Later
like other native-preinstalled apps by Garmin.
That would make complete Hike2 and allow to save more battery during longer breaks (like in the lunch break)
Resposta do programador
28 de Janeiro de 2018, jim_m_58
When you pause (the resume/dave/discard screen), you can press the back button, and see all the screens you can see when you aren't paused (with an indicator you are paused). Press start again brings back the menu, where you can resume.
"resume later" isn't possible with Connect IQ applications.
CMOS4
22 de Janeiro de 2018 | Versão 2.14
I am not sure yet whether this app will accomplish what I want, which is to have a map of my route from start to finish that will allow me to backtrack along a path until I get back to my starting position. The reason I am unsure still is that following a path back to a way point is not super easy without a compass superimposed on the path showing me the direction to go.
Also I am not sure what you mean by the field labeled "sun up". That sounds like sunrise, but it seems to me what you really mean is that once the sun is up, that is how much day light I have until sunset, since any other interpretation makes no sense because where I live sunrise is 7:38 am and sunset is 5:38, and the other fields state "sunrise in 5:25, sun up: 9:59"
Andi
24 de Dezembro de 2017 | Versão 2.11.2
Hello, I love this app, but lately it didn't record a 3h GPS track despite having fixed GPS in 2 occasions. It is a bit confusing as well to know if you resumed correctly after you paused, pushing the button on va3 should resume tracking but it didn't, had to chose resume on screen. I had some boot loops with my watch, so the bug with GPS track not being recorded may not be linked to the application however using walk native app did record correctly the end of my hike. A bit concerned about app reliability now, but will test again.
Resposta do programador
24 de Dezembro de 2017, jim_m_58
There is a bug in th 2.70 Firmware on the va3 that impacts all CIQ apps that use GPS. We just have to wait for a firmware update. Here's a thread about it:
https://forums.garmin.com/forum/into-sports/health-fitness/vivoactive-3-aa/1284352-gps-with-iq-app-and-v2-70
Lisa
22 de Dezembro de 2017 | Versão 2.11.2
Downloaded. Can't see how i change user setting...? I have a fenix 5s. Any advice?
Resposta do programador
22 de Dezembro de 2017, jim_m_58
There are a couple things you change on the watch itself -like white or black background. On the f5x, long press the up button to get a menu for those.
The majority of settings you change with your phone or Garmin Express. Here's a simple guide to using app settings: https://forums.garmin.com/forum/developers/connect-iq/connect-iq-showcase/115055-how-to-app-settings
Victor Berchet
4 de Dezembro de 2017 | Versão 2.11.2
Works great on my vivoactive3 with a lot of useful info.
However it consumes a lot of battery. What I usually see:
- ~1% per h in watch mode (with activity tracking on),
- ~10% per h in the native run mode (GPS),
- ~20% per h with this app
(Is it possible that some screen consumes more than others ? asking because I spent a lot of time using the compass or the track)
Would love to have a ascension rate (m/min).
Thanks for this good app.
Resposta do programador
6 de Dezembro de 2017, jim_m_58
The compass, the screens with graphs, and the "chart" screen do more when updatings. You may want to go back to something like the main screen when you're not looking at one of those screens.
zm
3 de Dezembro de 2017 | Versão 2.11.2
A greet app. But how to quit/exit app on vivoactive 3?
Resposta do programador
3 de Dezembro de 2017, jim_m_58
On a va3, "back" is a right swipe. That will exit the app before you are recoding of after you've saved/discarded the hike. while recording, it's also how you mark waypoints.
Steve Horstman
29 de Novembro de 2017 | Versão 2.11.2
Love the functionality, but it eats the watch’s battery life. A 4 hour hike took up 90% of the battery charge.
Resposta do programador
29 de Novembro de 2017, jim_m_58
what watch? I get a min of about 8hrs on vivoactives, and more on a Fenix. It should be very similar to something like the native running app in battery usage.
TMK17
6 de Outubro de 2017 | Versão 2.11.1
Works great on my Vivoactive 3. Keep up the great work.
Device App 
