mark_brown
2 de Dezembro de 2018 | Versão 2.14
I use before every run to monitor recovery, excellent app. highly recommended.
Resposta do desenvolvedor
9 de Dezembro de 2018, fbbbrown
thanks for the review, v 2.17 now includes SDNN, pNN50 and pNN20 metrics.
Dexter101010
8 de Novembro de 2018 | Versão 2.10.0
I've buyed this application and i've added to the data field in cardio application. The problem is that the data field show me : "No HRM Det". I've registered with the provided code and i even turn off the wrist HRM but still the same message. I have tried to input serial number for HRM strap but i can't, dar because the application support only numbers in serial window. My serial number for HRM, contain letters also. Please advice.
Resposta do desenvolvedor
8 de Novembro de 2018, fbbbrown
Thanks for reviewing, but for technical questions it is best to contact me using the ‘Contact Developer’ link.
Both HeartMonitor Apps require an ANT chest HRM.
Setup: Leave the optical HR set to ON and Disconnect the Chest HRM from your watch, from settings,sensors,HRM set the status to OFF.
The app will make the connection to the chest hrm, since it needs all the information provided by the HRM.
Please update this review.
Thanks
Fbbbrown
Simon Friis
30 de Outubro de 2018 | Versão 2.9
App works just fine, and is easy to use once installed and purchased.
I have a question:
My "Rmssd" base is around 50
My "average HRV" is around 75.
I have an understanding of what "rmssd" is, but what is""average HRV"?
Resposta do desenvolvedor
3 de Novembro de 2018, fbbbrown
Thanks for the review. The average hrv is the sum hrv values divided by the number of times the hrv is calculated. It is the average of the session.
Philly84
22 de Outubro de 2018 | Versão 2.7
I just installed the app(the 99cent version). I'm not sure if I'm doing something wrong but there are no values appearing for any of the xHR, rrHRV....ect.
I have a garmin premium heart rate chest strap and it's connected.
Resposta do desenvolvedor
22 de Outubro de 2018, fbbbrown
Thanks for the review.
Disconnect the Chest HRM from your watch, from settings-sensors-HRM set the status to OFF.
The app will make the connection to the chest hrm, since it needs all the information provided by the HRM.
Ali Ahmad
5 de Outubro de 2018 | Versão 2.6
When I start the app, it says "No HR" detected and just crashes. There is an icon remains on the screen sticks with escalamation mark with IQ.
Resposta do desenvolvedor
5 de Outubro de 2018, fbbbrown
Sorry your having a problem, please uninstall, restart and reinstall. if you still have a ! problem contact me directly. For the HRM, disable the HRM in the watch settings before starting the App. the app will make the connection to the HRM directly.
Rolf Fredheim
25 de Setembro de 2018 | Versão 2.3
App works well once you figure it out. My heart rate monitor seems to miss a beat occasionally, resulting in spikes in the data. Getting meaningful RMSSD scores as a result is hard. There should be an easy fix by omitting data points where the interval is more than (e.g.) twice the moving average.
Center For disruption
17 de Setembro de 2018 | Versão 2.2
This app allows the collection of relevant data regarding HRV, RMSSD and RR intervals which was precisely what I needed. It was hard to find how it worked at first, but then it is super easy to use. I recommend it.
Resposta do desenvolvedor
17 de Setembro de 2018, fbbbrown
Thanks for the review! Once the user turns of the Chest HRM sensor in setting, the app is easy to use.
Federico De Olivera
10 de Setembro de 2018 | Versão 2.1
Hello, it would be grate if the graphics show the average value in a selected period, like the other garmin connect graphics.
Resposta do desenvolvedor
17 de Setembro de 2018, fbbbrown
Thanks for the review. Yes a graph would be ideal and im developing a live selectable graph and history hrv graph. Thanks
Martin
2 de Setembro de 2018 | Versão 1.6.2
The App is basically useful, however with some downsides:
Artefacts are not cleaned. A missed beat from the HRM will make all data useless. However, with Garmin HRM´s this is quite common, so from my readings, there is alsways at least one artefact. Most of other (Android based) applications will normally recognize and clean this.
Secondly, there is the renaming of the data fields. If you want to further analyse the data, e.g. with Golden Cheetah which does also standard HRV calculations, the HR field is not present and renamed for "Raw Chest HRM Heart Rate" for whatever reason.
Resposta do desenvolvedor
8 de Setembro de 2018, fbbbrown
Thanks for the review, I did a update v2.0 that includes Optical HR support and corrects the corrupted rMSSD that you mention. I still have some more wirk on this app but has greatly improved. The raw HR is the Heart Directly from the HRM and is unfiltered by the Garmin Firmware.
Raymond Cruz
18 de Agosto de 2018 | Versão 1.6.1
When I press start my Edge 820 stalls. Needed to hard reset to be able to use the edge again. Now I cannot uninatall this app. Please update with an option uninstall.
Resposta do desenvolvedor
23 de Agosto de 2018, fbbbrown
Raymond, I went out and bought an EDGE to correct this issue. Turned out that there is a bug in the SDK that prevented EDGE line from exiting properly. This issue in now corrected in v1.6.2.
Thomas Müller
17 de Agosto de 2018 | Versão 1.6.1
Did not find any HRM on a Garmin Fenix 5 - connected or not. I tried 2 HRM following the rather confusing instructions. Also the 5 min. tial is stupid: who can make a serious decision within that time.
Resposta do desenvolvedor
18 de Agosto de 2018, fbbbrown
Sorry your having an issue, contact me directly and i will give you support to get this app to work for you.
1.) you need an Ant+ Chest HRM, a Bluetooth HRM will not work. 2.) disable the chest HRM in the main menu, Settings, Sensor menu in your watch. (The app will create the comunications directly to the HRM. If this step is not done, the app will show, HRM NOT DETECTED.). This is how your Monitor+HRV session will look.
https://connect.garmin.com/modern/activity/2929808001
Device App 
