Nuki Bridge Opener

Karel Thomayer
10 de Janeiro de 2021 | Versão 1.7.1

The application reports an error at startup "Failed to load Error: -5

EJ Schäfer
4 de Janeiro de 2021 | Versão 1.7.1

das einzige was nervt ist der ständige "Fehler beim laden: -5". Die Menütaste mitte auf der linken seite lange drücken, dann nach ganz unten und daten aktualisieren und es geht. schade dass das app eine verbindung zum handy braucht, anstatt zum wlan. ich habe neben dem türöffner auch den opener, ist alles auf entriegeln eingstellt, der opener öffnet schnell die Haustür bzw. dann später auch die Wohnungstür

Ramon Koch
24 de Dezembro de 2020 | Versão 1.7.1

Every time I open the widget, it starts with error "failed to load data, press menu". After refresh data, all functions work okay. Closing the widget and re-opening returns the same error again. My hardware: Fenix 6X Pro and Huawei mate 20 pro

Markus Seelig
2 de Dezembro de 2020 | Versão 1.7.1

Kleine Startschwierigkeiten meiner. seits. Jetzt geht's. Bin auf die nächste Zeit gespannt. Idee is super

René Zick
28 de Outubro de 2020 | Versão 1.7.1

Some Problems and failures, but at least its works! Thanx very much. Some Garmin-Watches have WLAN, so it is not necessary to communicate via bluetooth. When you are close to Nuki, you are also closeto your WLAN. And so, you have a lot security ways: WLAN-Key, API-Key, Bluetooth-Key.

Carsten
23 de Setembro de 2020 | Versão 1.7.1

The app idea is great, but when I need Internet, there is no reason to use the clock. I have my phone with me and so my door is automatically unlocked. The app only makes sense if I can open the door even without internet/phone.

Toni Frau
18 de Setembro de 2020 | Versão 1.7.1

Please, integrate also via bluetooth

Vít Jirka
17 de Setembro de 2020 | Versão 1.7.1

Works perfect! But it would be great to integrate also opening via Bluetooth for case when you leave phone at home or phone runs out of battery...

Korni
17 de Setembro de 2020 | Versão 1.7.1

Enabled Nuki Web, generate API Token, copied into Widget ... NO function

Jens
9 de Setembro de 2020 | Versão 1.7.1

Es klappt mit der Fenix 5+ ganz gut, muss aber halt mit dem Smartphone verbunden sein, zwingend, keine Direktverbindung Moeglich, wie bei Wear OS (wie ich gehoert hab) - korrigiert mich, wenn ich was uebersehen hab...

Felix Baumann
9 de Agosto de 2020 | Versão 1.7.1

Hallo, Leider ist eine Nutzung mit Vovoactiv 3 von Garmin nicht möglich. Bei falschen API Code erhalte ich 404, bei korrektem ein IQ! Symbol das auch nicht weiter hilft. Beides leider nicht sehr hilfreich. An sich schade, denn die Funktion wie beschrieben wäre super. Hello, The App is Not Working coorect on Garmin vivoactive 3. with correct API Token i get an IQ! With wrong one i get an 404. please einhacke documentation or correct the App. Over all it would be a Great App - if it would work... Br

Thomas Bethke
4 de Agosto de 2020 | Versão 1.7.1

Funktioniert nicht auf einer FENIX 5, nach dem starten kommt nur das „IQ!“

Thomas
30 de Julho de 2020 | Versão 1.7.1

Danke funktioniert mit meiner Fenix 6X pro, wenn es jetzt noch erkennung gäbe das man in der nähe vom Schloß ist wäre es optimal, aber so schon einmal vielen Dank.

André Weiß
22 de Julho de 2020 | Versão 1.7.1

Hello. I acted as described - but I have a yellow exclamation mark on my Marq Athlete after starting the widget. What can be done? Thank you.

Jacek Duda
17 de Julho de 2020 | Versão 1.7.1

After some issues, got the app to work and it works great. If you get 401 error, you need to copy the API very carefully - sadly nuki does not allow copying APIs, so please be careful. Also, the widget works with Android Nuki Bridge - no need to spend 100 euro on Nuki hardware if you have an old phone lying around. Congrats to the developer!

Nico
10 de Julho de 2020 | Versão 1.7.0

Really nice. Now a can leave my phone at home, bluetooth enabled and open my door with my Garmin when I stand in front of it. You did a great job. Thank you

Natascha
28 de Junho de 2020 | Versão 1.7.0

Works perfect with Nuki 2.0 and Vivoactive 4s. Thanks!

Daniel Schumm
5 de Junho de 2020 | Versão 1.7.0

Working again with vivo3. Permissions of API Token have to be set correctly to view and operate smart locks only. Magic Button and „prefer unleach...“ are set, „ Enter automatic ...“ is not.

deaconfrost78
3 de Junho de 2020 | Versão 1.7.0

Hi, I’ve Been facing error message 401. Or get the yellow explanation mark. What I’m doing wrong? I’ve got a Venu and the API token was set. Do you have any tips for me regarding the issues? Many regards. Tobias P. s. tried to send this as a message to you, but won’t work...

Tim
14 de Maio de 2020 | Versão 1.7.0

Works great with Nuki 2.0 and Forerunner 654. Thx!!!!

Anthon Koning
1 de Maio de 2020 | Versão 1.7.0

I have 2 Nukis; 1 * V1.0 and 1 * V2.0. Now the 1.0 works fine but the 2.0 is on the screen but an action will result in an error message. What can I do about this? It is a Vivoactive 3

Beatus Ille
24 de Abril de 2020 | Versão 1.7.0

Omfg! I never thought this is even possible that there is Nuki for Garmin. You made my day so much. Thank you so much!

Kim
20 de Abril de 2020 | Versão 1.7.0

I had to correct my last review. Since the latest update (1.7.0) the widget works flawless. The widget is a real asset. Now I can go jogging without my smartphone or bunch of keys, just my watch, and when I get home I open the widget and press the start button and within seconds the door opens.

Sebastian Maaß
16 de Abril de 2020 | Versão 1.6.12

Hi i acted as you describes - but i have a yellow exclamation mark on the watch (6x pro) if i want to open the widget. Can u help me?

Tobias
1 de Abril de 2020 | Versão 1.6.6

Worked well for a few days. Now it won't work. I contacted the developers. Awaiting their response.