App Icon

Oxygen Widget

Descrição

With increasing elevation and decreasing pressure, amount of effective oxygen in the air descreasing too. On sea level there's about 20,9% of oxygen in the air. This widget will show you a percentage of oxygen in actual elevation, elevation and if you will have Tempe sensor connected, it will show the temperature too (use at your own risk).</p><p></p><p>==========================================================</p>

Novidades

v4.1.0 - Support for Marq Commander and Adventurer, vivoactive 4/4s, Legacy Cpt.Marvel & First Avenger

Requisitos

Hardware associado

Obtenha o hardware

Informações adicionais

Permissões

Este aplicativo requer acesso ao:

  • Envie/receba dados através de rádio ANT para/de sensores de terceiros
  • Dados do sensor (por ex.: ANT+, frequência cardíaca, bússola)
  • Frequência cardíaca, barômetro, temperatura e histórico de altitude
  • Captain Marvel Captain Marvel
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • First Avenger First Avenger
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
Avaliação média: (24 avaliações)

George
26 de Março de 2020 | Versão 4.1.0

Μετράει τα επίπεδα οξυγόνου στον αέρα; Ή είναι ένα παλμικό οξύμετρο για τον άνθρωπο;

Leon Ramirez
16 de Fevereiro de 2020 | Versão 4.1.0

Saludos, como cambio las unidades a metros y C°?. Muchas gracias, me parece muy interesante la app.

Resposta do desenvolvedor
8 de Março de 2020, mr3ska

Hello, metric units and Celsius degrees are available when your device has all units set to metric (distance, elevation, depth, weight...)

Bubu
25 de Dezembro de 2019 | Versão 4.1.0

Excellent ! Indique l'oxygène disponible dans l'air selon l'altitude du moment, c'est un outil utile pour celui qui fait de la montagne, ça sert de rappel et d'indicateur.

Resposta do desenvolvedor
8 de Março de 2020, mr3ska

Thank you for your review and I am happy it is usefull for you.

David FT 🇲🇽
2 de Novembro de 2019 | Versão 4.0.0

I really loved this widget but unfortunately I updated my Fenix 5 to last firmware and it stoped working , I have uninstalled it and re installed but now it just shows the IQ! Error icon

Resposta do desenvolvedor
12 de Dezembro de 2019, mr3ska

Hello, I tested it on fenix 5 and fenix 6 devices and it works OK. How did you install it into the watch? Through PC (Garmin Express) or through phone (Connect, Connect IQ) ?

Sven McCall
22 de Outubro de 2019 | Versão 4.0.0

I like the idea of the widget glance but it doesn’t seem to be showing up on my Fenix 6. Just shows ‘OxygenWidget’. Any ideas?

Resposta do desenvolvedor
23 de Outubro de 2019, mr3ska

Hello Sven, thank you for your review. The nonPRO devices from fenix6 series have less memory than the PRO versions and thanks to it, they are working with widget glance mode differently. Thanks to it I am not able to change the way how it will be loaded/displayed on the device. I tested it on f6S nonPRO and the device loads the Glance mode view, but at first time it takes few seconds

Dmitry Ionan
26 de Setembro de 2019 | Versão 4.0.0

Solid. Love it.

Resposta do desenvolvedor
29 de Setembro de 2019, mr3ska

Thank you for your review. I am happy that widget is useful for you.

Gigica3
25 de Setembro de 2019 | Versão 4.0.0

Strada

Resposta do desenvolvedor
29 de Setembro de 2019, mr3ska

Thank you so much for your review.

Chris Whelan
27 de Abril de 2019 | Versão 3.5.0

How do I get the widget to show meters and Celsius?

Resposta do desenvolvedor
28 de Abril de 2019, mr3ska

Hello Chris, it is needed to set your device units all to metric units. It depends on your device, bud for example fenix3 has it in Menu - Settings - System - Units.

JCPK52
31 de Julho de 2017 | Versão 3.10-upd

Fine...

Edgar_edu
30 de Abril de 2017 | Versão 3.10

Great Widget!!!... It would be good have a statistic about de oxygen in the diferents moments during the day, weeks and months.

Jozef Ludvik
7 de Janeiro de 2017 | Versão 3.00-upd2

Super !!!

Damian
13 de Outubro de 2016 | Versão 3.00-upd1

Buen widget yo añadiría la opción de temperatura interna que tiene el Fénix 3 HR

Resposta do desenvolvedor
25 de Outubro de 2016, mr3ska

Hello, I am sorry but it is not possible to use internal temperature sensor for showing its data in connect IQ apps. Kind Regards Tomas

Jüngling Benjamin
9 de Setembro de 2016 | Versão 3.00-upd1

i want to use the temp sensor from fenix 3 and not a seperat one! i dont use the watch on my body all the time. sometimes on my backpack, still the same like a seperat temp sensor

Resposta do desenvolvedor
26 de Outubro de 2016, mr3ska

Hello, I am sorry but it is not possible to use internal temperature sensor for showing its data in connect IQ apps. Kind Regards Tomas

Hade Erawan
15 de Julho de 2016 | Versão 3.00-upd

great it work on my fennix 3

drmattgray
27 de Abril de 2016 | Versão 3.00

The percentage of oxygen in the air does not change with altitude, but remains constant. What does change is the atmospheric pressure, which in turn affects the partial pressure of oxygen in the air. In other words, there is less pressure available to drive oxygen into the bloodstream, which is why breathlessness occurs at altitude. The readout should therefore be changed to show percentage partial pressure of oxygen.

biggeryang
12 de Abril de 2016 | Versão 3.00

like........very useful,thank u for ur app

Mrkleen
11 de Abril de 2016 | Versão 2.40

Nice widget! Could you do one that displays elevation in feet and and temp in fahrenheit?

priw_2
1 de Abril de 2016 | Versão 2.20

Great.

ROG.
22 de Março de 2016 | Versão 2.20

Excellent widget. Thank u for ur work

Vedat ÇAKAR
21 de Março de 2016 | Versão 2.00

Very Nice... Thank you very much for app

Infelizmente, não há nenhuma estatística disponível ainda.