App Icon

ALDigital

Descrição

If you like this watch face, you can support my work with a small donation.</p><p>https://www.paypal.me/AndreasLillich </p><p></p><p>This watch face has four different fonts.</p><p>The Digital Font is the standard.</p><p>You can switch this off in the Watch face settings.</p><p></p><p>For sunrise / sunsets please set latitude and longitude in the watch face settings.</p><p>When your device deli...

Novidades

3.4</p><p>Update to SDK 3.0.3</p><p>3.3</p><p>Add support Fenix5s</p><p>3.2</p><p>Update to new SDK 3.0.1</p><p>3.1</p><p>Add support D2 Delta serie</p><p>3.0</p><p>Replace Icons Datafield2 + 3</p><p>Fix issue with "Stops 1Hz refresh during dnd time"</p><p>2.9</p><p>Add Font DOTCIRFUL</p><p>2.8.1</p><p>Update app thumbnails</p><p>2.8</p><p>Add "Stops 1Hz refresh during dnd time"</p><p>2.7</p><p...

Informações adicionais

Permissões

Este aplicativo requer acesso ao:

  • Executar em segundo plano quando não estiver ativo (potencialmente afetando a vida útil da bateria)
  • Localização GPS
  • Dados do sensor (por ex.: ANT+, frequência cardíaca, bússola)
  • Frequência cardíaca, barômetro, temperatura e histórico de altitude
  • O seu perfil de fitness do Garmin Connect™
  • Approach® S60 Approach® S60
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Music vívoactive® 3 Music
Avaliação média: (39 avaliações)


25 de Novembro de 2018 | Versão 3.4

此款手表界面超级实用,超喜欢!只是右上角的一个蓝色图标不知道是什么意思?

Resposta do desenvolvedor
26 de Novembro de 2018, AndiL

右上角的蓝色图标显示步距。 您可以更改显示数据和图标的设置。 希望谷歌翻译能够很好地翻译。 regards Andi

Allalin72
13 de Novembro de 2018 | Versão 3.4

Sehr viele Optionen, viele Daten, und kompetenter Entwickler. Läuft auf meiner fenix 5x. Danke!

Заур
22 de Outubro de 2018 | Versão 3.4

Sehr schön und fantastisch, funktioniert hervorragend Fenix 5 plus

Klaus Hanke
22 de Agosto de 2018 | Versão 3.3

Moin, wie immer alles bestens.

Altim
19 de Agosto de 2018 | Versão 3.1

Hi frend. Super on VA3. Fenix 5s impossible ?

Resposta do desenvolvedor
21 de Agosto de 2018, AndiL

Hi Altim, I have added support for Fenix5s. regards Andi

Samuel Inman
19 de Julho de 2018 | Versão 3.0

This is exactly the watch face I have been looking for. It displays all the data I want, and I like being able to change the language of the day of the week.

Resposta do desenvolvedor
19 de Julho de 2018, AndiL

Hi Samuel, Thank you, I am glad that it suits you. regards Andi

Abi
13 de Julho de 2018 | Versão 3.0

Sehr schön und fantastisch, funktioniert hervorragend

Resposta do desenvolvedor
19 de Julho de 2018, AndiL

Hi Abi, danke dir, freut mich das es dir gefällt.

Vlad Craita
7 de Julho de 2018 | Versão 2.8

This is the BEST watch face I’ve tried. By far. I hope it will be available for Fenix 3 devices too so I can install it to my dad as well. One recommendation, the app thumbnail looks outdated, if you change it to look fresh then even more people will download it.

Resposta do desenvolvedor
8 de Julho de 2018, AndiL

Hi, Thank you for the praise. I'll see if I can also make it available for Fenix3. Thanks for the information of the thumbnails. regards Andi

Enver
24 de Junho de 2018 | Versão 2.6

Thank you for the update. Any tips how to save the settings. After a update all is set to default.

Resposta do desenvolvedor
24 de Junho de 2018, AndiL

Hi, That is a problem with the iPhone. If you perform the update through PC Garmin Express, the configuration will remain. It also works on Android phones. regards Andi

Cool-Ricky
24 de Junho de 2018 | Versão 2.6

Thank you for your fast reply. I have the seconds turned off and I agree with you, that the heart rate data is the current. Regarding the font size, the fields in the lower part of the watch face are a little bigger, then the ones in the upper part, because they are a little moved to the center. Maybe that could be an option to have more space for the font size. Keep up the good work and best regards :)

Cool-Ricky
23 de Junho de 2018 | Versão 2.5.2

First of all I just want to thank you for your dedication and excellent programming skills. You're watch face is one of the few that use BMR (Basal Metabolic Rate) for calculating the active calories. I only have 2 constructive suggestions: 1- I've used the "DigitStorm" watch face and battery consumption, in my VivoActive 3 is just 0.65% per hour and with your watch face it's 1.10% per hour. With my Fenix 5 I don't have any problems because of the battery capacity but with the Vivoactive 3 it's a little short. 2- Can you increase slightly the font size of the fields. Keep up the excelent work and and have a nice weekend. Best regards, Henrique Teixeira.

Resposta do desenvolvedor
23 de Junho de 2018, AndiL

Hi Cool-Ricky, Thanks for your rating and praise. The battery consumption is still an issue that I know. I always use current data where possible. The HR always on costs a lot of battery, but I attach importance that the values ​​are correct and not 1-2 minutes old. But you can always turn that off in the settings. Even with the seconds that is possible. But I will try to optimize the battery consumption. Also, the font size of the data fields, I'll see if I can make it a little bigger. regards Andi

Klaus Hanke
19 de Junho de 2018 | Versão 2.3

Moin, wirklich gute Idee und eine gelungene Umsetzung. Danke für deine Mühe. Grüße

Albert
18 de Junho de 2018 | Versão 2.1.3

Excellent.

Forkys
17 de Junho de 2018 | Versão 2.0

Again another jewel. Thanks! Minor observation: a second HR (location/icon 1 top) besides the default one bottom right, seems to be given a totally different HR value from the default one at the bottom right.

Resposta do desenvolvedor
17 de Junho de 2018, AndiL

Hi, It is the same value. The lower right box has updates every second. The others every minute. You can set the lower right field to minute updates. regards Andi

Dirk
16 de Junho de 2018 | Versão 1.8.1

Hallo ! Fast perfekt ;-) Das einzige was mir fehlt is die 24 Stunden Zeit. MfG Dirk

Resposta do desenvolvedor
16 de Junho de 2018, AndiL

Hallo Dirk, die musst du auf deiner Uhr einstellen. Mein WF richtet sich danach. mfg Andi

Rosanne
15 de Junho de 2018 | Versão 1.8.1

My new watch face for my Forerunner 645 Music. My only suggestion would be a % sign behind the battery level. Great Job!!!!!

Resposta do desenvolvedor
15 de Junho de 2018, AndiL

Hi Rosanne, Thank you. % Sign is coming soon. regards Andi

Klaus Hanke
15 de Junho de 2018 | Versão 1.7

Moin, sehr gut. Ich wollte letzens noch fragen ob das ❤️mit Farbe geht. Und schwupps ist es da. Echt nice.

Resposta do desenvolvedor
15 de Junho de 2018, AndiL

Hi Klaus, ich wusste du würdest das Fragen. mfg Andi

Oliver
14 de Junho de 2018 | Versão 1.7

wird weiter immer besser!

Resposta do desenvolvedor
15 de Junho de 2018, AndiL

Danke Oliver.

RoNNoS
14 de Junho de 2018 | Versão 1.7

Vielen Dank für das Update. Große Klasse!

Resposta do desenvolvedor
15 de Junho de 2018, AndiL

Bitte gerne.

RoNNoS
14 de Junho de 2018 | Versão 1.6

Danke das du es dir überlegst wegen den Farben pro Datenfeld. Wenn nicht vielleicht dein nächstes Watchface mit mehr Farben. Ist trotzdem mein Favorit im Moment auf der Forunner 645 Music.

Resposta do desenvolvedor
14 de Junho de 2018, AndiL

Hi, ich habe eigene Icon Farben für jedes Datenfeld eingebaut. Auch gibt es die möglichkeit die Batterie Level basierend zu färben. Dies überschreibt die jeweilge Datenfeld Icon Farbe. Weiters habe ich auch eine eigene Farbe für den Move indicator eingebaut. Version 1.7 HTH Andi

RoNNoS
13 de Junho de 2018 | Versão 1.5.1

Danke für das Watchface. Würde es gut finden wenn man noch jedes Icon und die movebar eine Farbe zuordnen kann. Und eventuell das battery Icon eine Variable Farbe bekommt je nach Akkustand.

Resposta do desenvolvedor
14 de Junho de 2018, AndiL

Hi, danke für deine Bewertung. Eigentlich wie ich die Einstellungen so einfach wie möglich halten. Ich überlege mir ob ich eigene Farben pro Datenfeld mache. mfg Andi

Klaus Hanke
12 de Junho de 2018 | Versão 1.2

Moin, sehr gute Idee und ein schönes Watchface.

NoelWahoo
11 de Junho de 2018 | Versão 1.0.1

Love this watchface, very readable. Thanks Andi

Infelizmente, não há nenhuma estatística disponível ainda.