Lap by Position

Kevin Jimenez
18 de Maio de 2021 | Versão 4.1

Hello. Is there a way to make this field fit in a one-field screen on an edge 130 plus? Unfortunately it only uses the upper 1/3 of the screen, and is difficult to see all values while cycling.

r.cheron684
30 de Janeiro de 2021 | Versão 4.0

l like it very much. Thank you for the share. The start point is in fact the starting point of your 2d lap. Which is fine, as you can warm up before really going for your lapses. One thing I'd like, is the ability to reset the counter and start position each time I press the lap button : I did 3 × 8' LT today, with 3' rest between each. When I had to go back to work, I was not necessarily at the starting line. Don't know if it's doable though.

Tisztul_A_Visztula
15 de Outubro de 2020 | Versão 4.0

Although during my tests I was always passing the GPS start point within a circle of a radius of 2m both with 4.0 and the previous version of LbP, in spite of the failure of the latter, the new version worked during each of my test independently from my moving speed (walk or run).

Tisztul_A_Visztula
13 de Outubro de 2020 | Versão 3.8

The older versions worked for me on my Fenix 3. I mean, back in 2018-2019. I swapped to Fenix 5 plus in January, but I used this datafield only last week for the first time with F5+. Visually it seems to work, no collapse and that sort of things, but it never and never detects any autolap when I pass the start position. If I push lap button manually, it works, lap is counted etc. I made exhaustive tests even checking the map on my F5+ with a zoom of 5m, and even if after a walk of 100 m I am again spot on the green start mark, nothing happens. Before asking me why I had not contacted the developer first instead of giving a bad review, I disclose I had done it. Actually it was 5 days ago.

MatteoGallo86
22 de Junho de 2020 | Versão 3.8

Cuando vea los resultados en la app en el tlf, podré ver el tiempo por cada vuelta? Y la velocidad?

Lothar Becke
16 de Maio de 2020 | Versão 3.8

Works great for me. Thanks. I tried it on a standard 400m oval using a Forerunner945 device and everything worked as expected/described.

marco del puppo
12 de Maio de 2020 | Versão 3.8

For. 945: Tried twice, first time (running) it marked the lap something like 100m in advance the initial point (but then it was consistent), 2nd time I used with the bike and no way to have a lap marked..

Mike Miller
10 de Abril de 2020 | Versão 3.8

New to Garmin and bought a Forerunner 235. It seems like a great product and was excited to use this data field. But after uploading , setting up the single field layout screen, and taking a few laps around the block on my mountain bike to test, it would not trigger a lap after passing the starting point. I tried it a few times. What am I doing wrong? Any help is appreciated!

Ian Lang
3 de Abril de 2020 | Versão 3.8

HI, downloaded this app a few days back, to help count laps while self-isolated and having to run laps of the garden. Initially worked fine, but now the lapping point keeps shifting during the run. my route is a lollypop, so start at the bottom of the stick, run up (the drive), then clockwise round the back garden and back down the drive to the starting point. As I understand it, the lap counter should increment at the point where the run started ie the bottom of the drive, but the last few runs it has been incrementing at the 9 o'clock position of the loop. Occasionally it would then jump to lapping at 5 0'clock position of the loop. Very strange! I have tried uninstalling the data field, restarting the watch, and reinstalling, but doesn't make any difference. Can you offer and advice on why this might be happening, and how to fix it? Thanks Ian

corexradnar
8 de Dezembro de 2019 | Versão 3.8

Works well but what app will write the laps into the main file?

Mustafa Coskun
21 de Setembro de 2019 | Versão 3.8

good for riding and biking.

Gadi_Markovich
10 de Junho de 2019 | Versão 3.8

Hi, is this good for 25 meter pool size?

Miro Lehky
29 de Maio de 2019 | Versão 3.7

Love the field on my 935. Any plan to support the 945?

Sam
1 de Maio de 2019 | Versão 3.7

Wouldn't lap with my vivoactive unfortunately.

Lecreux
9 de Fevereiro de 2019 | Versão 3.4-upd7

Hello, crashes every time with, fenix5 and fenix5plus. Crashes when we get the GPS lock. Am I alone ?

Sebastian Velez Z.
23 de Setembro de 2018 | Versão 3.4-upd7

I really amazing, i would like if the lapbyposition can save the the laps in my activity

Harri Toivonen
4 de Fevereiro de 2018 | Versão 3.4-upd1

This 40m rule to continue after lap is not very usufull. I like to have information on every lap, also the one I like to take break. If the lap is allowed to skii on one direction this is too hard to use.

Mario Mastrorilli
22 de Junho de 2017 | Versão 3.3

Very usefull when running in track. My suggestions: - Remove "Last Lap Distance". when using this data filed I run on a track so I know exactly how long is each lap. - Total time and Average Lap time would be more usefull information.

Thomas Reiber
3 de Junho de 2017 | Versão 3.3

Sehr gut , endlich ist es da , Lap by Position für die vivoaktiv HR . Dankeschön

Denchito🚴🏽
6 de Fevereiro de 2017 | Versão 3.0-upd

Cubre una carencia de los GARMIN modernos. Debería avisar con un pitido ,y una vibración, que se ha completado la vuelta, y mostrar una ventana emergente con el tiempo que se ha tardado en completarla.

Zrino Nenadović
20 de Setembro de 2016 | Versão 2.2-e82

App do not store lap info in .fit file so Garmin connect do not see laps. Make app with more cycling fields like cadence, speed, avg speed, hr ... Etc

Lafitte Laurent
31 de Julho de 2016 | Versão 2.2-e81

Bonne application, il serait intéressant d'avoir la vitesse et le rythme cardiaque en plus. De même il serait très bien que le départ des tours se lance lorsqu'on appuie sur le bouton lap et non au lancement du GPS.

Jirdsak
28 de Abril de 2016 | Versão 2.0-upd

Happy with this data field , functionable for my loops running and suggest to add HR field ; HR rate , HR zone