If you wish to support the development you can send me a coffee here https://buymeacoffee.com/peterdd</p><p></p><p>* To use this app you have to add the data field to an existing activity profile such as "run".</p><p>* To configure the data field use the connect iq mobile app or garmin express on a computer. </p><p>* Choose the correct operating mode, when you have paired your sensor in the firmware device settings then use "paired" in the settings... </p>
2.5 new devices support</p><p>2.3 added ability to enter tempe offset </p><p>2.0 add support for watches and handhelds (with a choice between a paired tempe (default) and unpaired tempe)</p><p>1.0 added possibility to show a label, fixed tempe chart on Edge 130, implemented donation key</p><p>0.2 clear history graph when the timer is reset</p><p>0.1 initial release
Este aplicativo requer acesso ao:
Approach® S60
Approach® S62
Captain Marvel
D2™ Air
D2™ Air X10
D2™ Charlie
D2™ Delta
D2™ Delta PX
D2™ Delta S
D2™ Mach 1
Darth Vader™
Descent™ G1, Descent™ G1 Solar
Descent™ Mk1
Descent™ MK2, Descent™MK2i
Descent™ Mk2S
Edge® 1000
Edge® 1030
Edge® 1030 Plus
Edge® 1030, Bontrager
Edge® 1040
Edge® 130
Edge® 130 Plus
Edge® 520
Edge® 520 Plus
Edge® 530
Edge® 820
Edge® 830
Edge® Explore
Edge® Explore 1000
Edge® Explore 2
Edge® Explore 820
Enduro™
Enduro™ 2
epix™ (Gen 2), quatix® 7 – Sapphire Edition
First Avenger
ForeAthlete® 735XTJ
Forerunner® 245
Forerunner® 245 Music
Forerunner® 255
Forerunner® 255 Music
Forerunner® 255S
Forerunner® 255S Music
Forerunner® 55
Forerunner® 645
Forerunner® 645 Music
Forerunner® 735XT
Forerunner® 745
Forerunner® 935
Forerunner® 945
Forerunner® 945 LTE
Forerunner® 955, Forerunner® 955 Solar
fēnix® 5, quatix® 5
fēnix® 5 Plus
fēnix® 5S
fēnix® 5S Plus
fēnix® 5X, tactix® Charlie
fēnix® 5X Plus
fēnix® 6
fēnix® 6 Dual Power
fēnix® 6 Pro, fēnix® 6 Sapphire
fēnix® 6 Pro Dual Power
fēnix® 6 Pro Solar
fēnix® 6 Solar
fēnix® 6S
fēnix® 6S Dual Power
fēnix® 6S Pro, fēnix® 6S Sapphire
fēnix® 6S Pro Dual Power
fēnix® 6S Pro Solar
fēnix® 6S Solar
fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballistics
fēnix® 7, quatix® 7
fēnix® 7 Pro
fēnix® 7S
fēnix® 7S Pro
fēnix® 7X, quatix® 7X – Solar Edition
fēnix® 7X Pro
GPSMAP® 66i
GPSMAP® 66s / 66st
GPSMAP® 66sr
GPSMAP® 67, GPSMAP® 67i
GPSMAP® 86i
GPSMAP® 86s
GPSMAP® 86sc
GPSMAP® 86sci
Instinct® 2, Instinct® 2 - Camo Edition, Instinct® 2 Solar - Tactical Edition, Instinct® 2 Solar - Surf Edition, Instinct® 2 - dēzl™ Edition
Instinct® 2S, Instinct® 2S - Camo Edition, Instinct® 2S Solar - Tactical Edition, Instinct® 2S Solar - Surf Edition, Instinct® 2S - dēzl™ Edition
Instinct® 2X
MARQ™ Adventurer
MARQ™ Athlete
MARQ™ Aviator
MARQ™ Captain, MARQ™ Captain: American Magic Edition
MARQ™ Commander
MARQ™ Driver
MARQ™ Expedition
MARQ™ Golfer
Mercedes-Benz Venu®
Mercedes-Benz Venu® 2
Mercedes-Benz Venu® 2S
Montana 700, Montana 700i, Montana 750i
quatix® 6
quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
Rey™
Rino® 7 Series
tactix® 7, tactix® 7 – Pro Ballistics Edition, tactix® 7 – Pro Edition
Venu®
Venu® 2
Venu® 2 Plus
Venu® 2S
Venu® Sq.
Venu® Sq. Music
vívoactive® 3
vívoactive® 3 Mercedes-Benz® Collection
vívoactive® 3 Music
vívoactive® 4, GarminActive
vívoactive® 4S, GarminActive S
vívoactive® HR
Pavel Vraj
29 de agosto de 2022 |
Versão 2.5
It works perfectly on Edge Explore 2, no interference with my other ant+ sensors and devices.
Jacek Betler
29 de agosto de 2022 |
Versão 2.5
The temperature versus time graph should be corrected. During the 8-hour hike, it is unreadable and shows little of it.
Hostrup 🇩🇰
16 de agosto de 2022 |
Versão 2.5
Sadly it didn't quite work out as expected on my Tactix Delta Solar (Fenix 6X). I enabled the "store into .fit file" or some wording like that, and it would not sync my activity! I had to manually transfer it from my device, and upload it to Connect. However, I did a walk-activity (also with this datafield enabled) and it worked fine? I should point out though, that I had enabled the graph when I did the walk-activity, whereas the graph was disabled when I did the run-activity. Would be a useful datafield if I could get it to work. Thanks for putting an effort into this software, free of charge! Much appreciated!
John Krueger
30 de julho de 2022 |
Versão 2.5
Been using this for a while on my 1030 plus, and it works great. It's nice to have a relatively accurate temperature record, since the internal thermometer can be so wildly inaccurate sometimes ((I've seen 40 degrees to high on sunny days.) The only issue I've encountered was when I had an action camera also connected to the Tempe, it seemed to prevent the 1030 plus from connecting, but when only the 1030 plus is connected, the data field works perfectly.
Omar Halil
27 de julho de 2022 |
Versão 2.5
Podría tener la información en línea y no una actualización cada 5 minutos
MTB_74
15 de maio de 2022 |
Versão 2.4.1
Works perfectly on an Edge 530, it shows the Tempe reading in a data page and record it in the .fit file, perfect to view in Garmin Connect (and the Tempe is a lot more precise than the internal 530 sensor, if properly placed not in the sun light).
Artur Wosinski
24 de janeiro de 2022 |
Versão 2.3.3
Can You add an config option to set reading/logging interval? Tempe sends value every minute. I'll even create PayPal account if You add it ;-)
Thomas Schäfer
24 de novembro de 2021 |
Versão 2.3.3
Sehr gut App um die Temperatur in der FIT Datei festzuhalten. Funktioniert mit dem Montana 750i
Rob Theunissen
21 de novembro de 2021 |
Versão 2.3.3
Het idee vind ik goed. Het spaart veel stroom. Maar jammer dat het niet altijd werkt op mijn GPSMAP 66
Tellef
28 de dezembro de 2020 |
Versão 2.0
Very good! I sent a donation to remove the message that appears for 5 seconds two times every minute. He sent me a code to enter after less than a day. Sadly this did not remove the message. But when I asked for help, he replied very quickly with a suggestion that fixed the problem. If you own a Garmin Tempe, and want to use it with your Edge bike computer, this is what you need! The Tempe still sends temerature readings only every 5 minutes, but I think this is enough. If Garmin chose to update the temperature every minute, the battery in the Tempe would last only 2-3 months
Bob Baumeister
20 de novembro de 2020 |
Versão 1.0
Thank you! It works! Im happy! What more do you want... .-) Donated. Thanx
John Ratsey
30 de outubro de 2020 |
Versão 1.0
Thanks for this app which, unlike the other one I tried, keeps working throughout a ride. I'm only giving 4 stars at the moment as I would welcome some refinements (i) a smaller font appropriate to the 10 field display I'm using on my Edge 1030; (ii) degree symbol + C after the number; and (iii) the ability for the user to apply an offset between the reported temperature and that displayed / recorded. All my Garmin devices supply a temperature several degrees below the actual. If it's also possible to have an option to stop the Edge writing Garmin's temperature to the .fit file then that would be wonderful.
Resposta do desenvolvedor
2 de novembro de 2020,
peterdedecker
It's unlikely I'll provide an offset value, you should expect the Tempe to measure right, right? You can already choose whether or not to record the tempe values to the fit file or not in the app settings. The numeric font I'm using does not contain characters for C or F, so I can't put it after the number, but I've put the C or the F in the label of the field. I'll see if I can finetune the layouts to better match what the edge is showing natively in each layout. Cheers, Peter.
Bob Baumeister
21 de outubro de 2020 |
Versão 0.2
Many thanks for this data field for the Tempe Sensor. I installed the "Tempe Visualizer" on my Garmin 130 and tested it on a ride. Unfortunately the visualization on the Garmin 130 is not displayed. Maybe this function is not available on the Garmin. Is that so? The temperature display is top and is also updated and that is the most important thing for me! Thank you for this very helpful data field for the Tempe temperature sensor. It works very well.
Data Field