App Icon

Stryd Zones

Descrição

For Issues or Questions please contact the developer via [email protected] That way we will be able to help you with any issues you might have.</p><p>This Data Field is for Stryd Pod Owners. This data field delivers real-time power data from your Stryd Pod alongside the zone you are running in. These Zones are based on 'Critical Power' so if you do not have a CP you will not have any zones, in this case, you can set your zones manually in Power Center. We highly recommend having Auto CP enabled in addition to using this data field, as this will give you the most up to date training zones based on your current metabolic fitness.</p>

Novidades

February 4, 2020</p><p>- Now shows Paired 'ANT ID' before pressing start</p><p>- Bug Fix Stryd (non-wind), Elevation fix for when running close to sea level.</p><p></p><p>January 10, 2020</p><p>- Zone Bar now shows up on FR 920XT </p><p></p><p>January 2, 2020</p><p>- Fixed averaging issue caused by pausing</p><p>- Lap Power now correctly shows up in CIQ</p><p>December 31, 2019</p><p>- Lap average will now reset during structured workout steps</p>

Requisitos

Hardware associado

Obtenha o hardware

Informações adicionais

Permissões

Este aplicativo requer acesso ao:

  • Envie/receba dados através de rádio ANT para/de sensores de terceiros
  • Executar em segundo plano quando não estiver ativo (potencialmente afetando a vida útil da bateria)
  • Enviar/receber informações para/da Internet
  • Gravar informações adicionais em ficheiros de atividade
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Venu Venu
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
Avaliação média: (69 avaliações)

Daniel Svozil
12 de Fevereiro de 2020 | Versão February 4, 2020

Same watches and same problem as James_Kelley, i. e. no color and zones for FR935. The proposed solution didn't work (Android).

Tobias Lind
8 de Fevereiro de 2020 | Versão February 4, 2020

Great with Garmin Fenix 6s pro! Just ran my 4:th run today (got my CP auto-calculated after my 3:rd). Only issue is that the zone-number is very small on the 5-6 data field screens.

James_Kelley
2 de Fevereiro de 2020 | Versão January 10, 2020

GARMIN 935. No display colors...Only black and white. Does not display zones (always blank), even though I have Visual Zone Bar and Numerical Zone enabled on Connect IQ mobile app. Disappointing...

Resposta do desenvolvedor
3 de Fevereiro de 2020, StrydTeam

Hey James, This issue is caused by not getting your data successfully pulled in from the server. What I recommend doing is opening up Garmin Connect Mobile, ensuring that your what is connected and leaving the app open for roughly 5 minutes. Or if you have an IOS device, while connected toggle Bluetooth off and on and this should fix the issue (this is a bug in the mobile ios device). If you have any issue feel free to contact me at [email protected] and I can help you find a solution.

sklyarov
30 de Janeiro de 2020 | Versão January 10, 2020

How to turn off vibrating when stryd is detached? Stryd loses connection quite often and constant buzzing drives me nuts

Patrick Hammer
29 de Janeiro de 2020 | Versão January 10, 2020

Nutze die Forerunner 735xt. Während dem Laufen zeigt die App mir korrekte Watt Werte an. Jedoch synchronisiert die Uhr mein Lauf nicht. Und es scheint so als würde die Lauf-Datei beschädigt zu sein. Ich kann mir die Details der letzten Aktivität nicht ansehen.

Dani
12 de Janeiro de 2020 | Versão January 10, 2020

When i want use power zone in run doesn't want to work It's been searching for all the time but It shows nothing can you fix that please?

Resposta do desenvolvedor
12 de Janeiro de 2020, StrydTeam

Hi Dani, I would love to help you try to resolve this issue, you can email me at [email protected] and we can diagnose the issue. Do you have any other data fields presents at the same time as stryd-zones?

Diki
1 de Janeiro de 2020 | Versão December 31, 2019

After the last update, the power of each lap on Garmin Connect show zero :(. The white line that use to show what zone that I am at is confusing because the space between each zone also white. I hope the line is black.

Resposta do desenvolvedor
2 de Janeiro de 2020, StrydTeam

Diki, Thank for quickly reporting this, we got the fix up as soon as we could! make sure to update to the latest version! Thanks!

Jonathan Tepper
29 de Dezembro de 2019 | Versão November 25, 2019

Just got Stryd and followed the instructions, so far the details are helpful. With 2 runs in looking forward to seeing more. However, I am puzzled as I do not see a field to enter my username in the app. I just see the ANT field. I have the Nov 25 update. Checked the support and no documentation, othwise it would be a 5 star.

Resposta do desenvolvedor
30 de Dezembro de 2019, StrydTeam

Hi Jonathan, thanks for your feedback and review. The reason you do not see a place for your username is because you must have either a ;235/630/635/920/vivoactive or Fenix. Due to restrictions of these devices you will not be able to input your username. I do have a question though, do you see a place to input your ‘cp’ ?

Thomas
24 de Dezembro de 2019 | Versão November 25, 2019

On Fenix 6, the digits in the power field are not centered correctly. In smaller data fields, like the six in one display this causes the digits to be pushed outside the border of the field.

GS72_趙元 Y.Chao
19 de Dezembro de 2019 | Versão November 25, 2019

As we can only have one iq app access to Stryd and Stryd Zone can have a secondary display, would it be possible to have Stryd pace shown as the secondary one? The stryd pace doesnot store power info…

Brad Lane
17 de Dezembro de 2019 | Versão November 25, 2019

Same issue as Albert below. I'm training with power zones on training peaks and the workouts synced with garmin very well.. I can start the running activity with the workout and stryd but...I cannot see the power inside the planned workout field :( It's a problem in order to follow the planned workout because I can't see if I'm running inside the zone.. Can this be fixed? can stryd show the power on the power 3s field on garmin?

Resposta do desenvolvedor
18 de Dezembro de 2019, StrydTeam

At the moment we do not have supported native support or the ability to send data to the structured workout application. This is something we are pushing hard for, but not possible at the moment.

Shane 🇬🇧
16 de Dezembro de 2019 | Versão November 25, 2019

Works 100% with my 6x as it should, the only thing you need with your Stryd. The FB team are amazing as well

🤙🏼 Carlos SabaS 🇪🇸
12 de Dezembro de 2019 | Versão November 25, 2019

Ok

kchen15
12 de Dezembro de 2019 | Versão November 25, 2019

My garmin fenix 5s only show a number but no zones. I've already enable the zones data field in garmin connect.

libor.v
12 de Dezembro de 2019 | Versão November 25, 2019

Any news with font size on 920xt after Nov25 update????

Emmanuel
4 de Dezembro de 2019 | Versão November 25, 2019

Top !

Albert
30 de Novembro de 2019 | Versão November 25, 2019

Is working well on Fenix 6X with latest Stryd with wind detector, shows the power on a single display or inside a multiple fields display... but... I'm training with power zones (FTP) on training peaks and the workouts synced with garmin very well.. I can start the trail running activity with the workout and stryd but...I cannot see the power inside the planned workout field :( It's a problem in order to follow the planned workout because I can't see if I'm running inside the zone.. Can this be fixed? can stryd show the power on the power 3s field on garmin?

Kyle Blevins
26 de Novembro de 2019 | Versão November 25, 2019

All of my original issues have been addressed and this data field is working fine now. They’ve diligently updated the font size and other issues. I have no complaints and works flawlessly for me now.

aurelian
24 de Novembro de 2019 | Versão November 15, 2019-3

font size is too small on FR230 to be usable while running.

Glauber 🇧🇷
23 de Novembro de 2019 | Versão November 15, 2019-3

The average of the metrics does not appear (power, form power, ground time, etc.). Essential for a good understanding. Can you include it?

Resposta do desenvolvedor
23 de Novembro de 2019, StrydTeam

These metrics are available in real time with the Stryd-IQ app. Stryd Zones on the other hand was developed with the sole focus of Power Averaging. I definitely recommend using the Stryd-IQ app to the get those metrics you are requesting. I hope this helped.

Rodrigo Amézquita
21 de Novembro de 2019 | Versão November 15, 2019-3

Just show a number but no zones

Resposta do desenvolvedor
21 de Novembro de 2019, StrydTeam

Rodrigo, You will need to enable zones, by going into the Garmin "Connect IQ" app and enabling it via the data field settings.

Emmanuel
18 de Novembro de 2019 | Versão November 15, 2019-3

Font size is too small on a F3 two or three or four field display. Could you increase size of the font like other field application ?

Resposta do desenvolvedor
19 de Novembro de 2019, StrydTeam

Hey Emmanuel if you want to contact me via [email protected] with a picture of where the font is too small. We should be able to get this issue fixed for you.

TroyHorse
18 de Novembro de 2019 | Versão November 15, 2019-3

On 11/12/19 Stryd emailed their customers saying, "Stryd Zones is now the go to data field for Stryd. We highly recommend that all Stryders move over to this new data field. If you are a Stryd Power data field user, remove this old data field & please install Stryd Zones." This migration to Stryd Zones was premature. The new app had a critical flaw wherein all Stryd data would fail to record to an activity. Yes, you read that right. Power data would show on the watch during the activity, but no Stryd data (power or running dynamics) would save to the activity. The Stryd data could be recovered via offline sync, but it was isolated and independent of all the native Garmin data that normally accompanies it, such as location and HR. The pairing of the Stryd data and Garmin data was permanently lost. According to Stryd customer service, this massive bug was fixed in a "3rd release" the night of 11/15 (version "November 15, 2019-3"), but the release notes make no mention of multiple versions on this date or of this monumental bug. Condolences to all those who lost critical Stryd data during this time in their races and key runs. Hopefully Stryd will take it more seriously next time they roll out a new app, being careful not to release something with critical bugs that should still be in beta.

Gerun78
17 de Novembro de 2019 | Versão November 15, 2019-3

don't not shows up the display on my Fenix 6s. Still shows power in a tiny font along ( as previus Stryd power )don't shows any zones, could at least see the power

Resposta do desenvolvedor
21 de Novembro de 2019, StrydTeam

Gerun87, You will need to enable the zones metric by going into the data field settings using the Garmin "Connect IQ" mobile app. If you are having problems enabling this, like always feel free contact me at [email protected] and I will assist you.

Kyle Blevins
14 de Novembro de 2019 | Versão November 13, 2019-2

November 13 update did not fix the display on my Fenix 3. Still shows power in a tiny font along with the even smaller zone # verbiage, makes the field useless for me, whereas in the old power app, I could at least see the power # with no issues. Vastly prefer the field to only show the power # in the standard font size when it’s on a multi field screen.

Resposta do desenvolvedor
15 de Novembro de 2019, StrydTeam

Kyle, the latest updates didn't affect CIQ 1.3 Watches. I will fix this issue for older watches today. Feel free to send any complaints or suggestions to me directly at [email protected]

Infelizmente, não há nenhuma estatística disponível ainda.