App Icon

Temps

Descrição

A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>

Novidades

0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66

Informações adicionais

Permissões

Este aplicativo requer acesso ao:

  • Dados do sensor (por ex.: ANT+, frequência cardíaca, bússola)
  • Frequência cardíaca, barômetro, temperatura e histórico de altitude
  • Approach® S60 Approach® S60
  • Approach® S62 Approach® S62
  • Captain Marvel Captain Marvel
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Darth Vader™ Darth Vader™
  • Descent™ Mk1 Descent™ Mk1
  • First Avenger First Avenger
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
  • fēnix® Chronos fēnix® Chronos
  • GPSMAP® 66i GPSMAP® 66i
  • GPSMAP® 66s / 66st GPSMAP® 66s / 66st
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain, MARQ™ Captain: American Magic Edition
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • MARQ™ Golfer MARQ™ Golfer
  • Oregon® 7 Series Oregon® 7 Series
  • quatix® 6 quatix® 6
  • quatix® 6X quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
  • Rey™ Rey™
  • Rino® 7 Series Rino® 7 Series
  • Venu Venu
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
Avaliação média: (56 avaliações)

john_tseng_garmin
7 de Julho de 2020 | Versão 0.23

Approach S62 shows "None Paired" ? S62 is on the support list.

Resposta do desenvolvedor
8 de Julho de 2020, jim_m_58

Pairing refers to a paired Tempe Sensor. Do you have one? The internal temperature is not available on the s62, so a tempe is the only option.

Regin Swenning
24 de Junho de 2020 | Versão 0.23

fenix3 HR - I only get temperature from the Tempe-sensor, no Internal reading showing on the screen. (Temps v. 0.23)

Resposta do desenvolvedor
26 de Junho de 2020, jim_m_58

The f3 doesn't support CIQ reading the internal temperature. Internal temp is only available on newer devices.

Michael Irmer
11 de Junho de 2020 | Versão 0.22

Internal temperature is not available on Forerunner 245. Can you implement an option to disable the internal temperature? Tempe works fine.

Resposta do desenvolvedor
11 de Junho de 2020, jim_m_58

I'll add it to my list of things to look into

Richard Vowles
27 de Maio de 2020 | Versão 0.22

I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.

Resposta do desenvolvedor
27 de Maio de 2020, jim_m_58

You must be thinking of a different widget as this one never vibrates. Could it be the FW is doing a vibrate when it connects to the tempe?

Sam
20 de Maio de 2020 | Versão 0.22

Ok, very very Ok.

Giantmtbiker01
15 de Maio de 2020 | Versão 0.22

Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.

Geneviève
11 de Maio de 2020 | Versão 0.22

I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.

Resposta do desenvolvedor
12 de Maio de 2020, jim_m_58

It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.

Zaca
2 de Maio de 2020 | Versão 0.22

It doesnt work in Forerunner 235, i dont know why, please help me!!

Resposta do desenvolvedor
3 de Maio de 2020, jim_m_58

The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.

Jose Manuel
9 de Abril de 2020 | Versão 0.22

No salecen grados centigrados

Resposta do desenvolvedor
9 de Abril de 2020, jim_m_58

C or F is based on a standard setting on your watch. Under Settings/System/Units, set Temperatature Units to C or F.

jean robin
31 de Março de 2020 | Versão 0.22

Installed on my Vivoactive HR and doesn't work.

Resposta do desenvolvedor
31 de Março de 2020, jim_m_58

Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.

Karl Mortar
17 de Janeiro de 2020 | Versão 0.21.7

does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.

Resposta do desenvolvedor
17 de Janeiro de 2020, jim_m_58

The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.

Miguel
21 de Dezembro de 2019 | Versão 0.21.6

This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!

Resposta do desenvolvedor
22 de Dezembro de 2019, jim_m_58

In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor. As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.

Irek
31 de Julho de 2019 | Versão 0.20.1

Tego szukałem.

Joe Kelly
17 de Julho de 2019 | Versão 0.20.1

So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) : Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause. Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.

Yarik
9 de Maio de 2019 | Versão 0.20.1

Очень полезное приложение для тех, у кого есть garmin tempe. Работает отлично на garmin fenix 5X plus.

Murray Keogh
2 de Janeiro de 2019 | Versão 0.18

Great widget Jim! Keep up the good work

Dušan Jurkovič
12 de Dezembro de 2018 | Versão 0.18

Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?

Resposta do desenvolvedor
13 de Dezembro de 2018, jim_m_58

Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.

Christopher Lawley
4 de Dezembro de 2018 | Versão 0.18

Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended

Resposta do desenvolvedor
4 de Dezembro de 2018, jim_m_58

Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.

Emanuel Chiculita
28 de Novembro de 2018 | Versão 0.18

Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!

barry
30 de Outubro de 2018 | Versão 0.18

Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???

Resposta do desenvolvedor
31 de Outubro de 2018, jim_m_58

That's the version number of the app.

Alan Formstone
25 de Outubro de 2018 | Versão 0.18

Excellent. Exactly what i was looking for. Totally 5 stars!

Enrique Del paso
30 de Junho de 2018 | Versão 0.17-upd3

On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...

Resposta do desenvolvedor
30 de Junho de 2018, jim_m_58

The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.

Łukasz Tatys
29 de Junho de 2018 | Versão 0.17-upd3

Great and simple

jsanchezi
25 de Junho de 2018 | Versão 0.17-upd3

Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.

PERO.BS
1 de Maio de 2018 | Versão 0.17-upd1

Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max

Infelizmente, não há nenhuma estatística disponível ainda.