App Icon

Running Power

Opis

This app displays your current running power. If you are new to training with running power, try this one first.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garm...

Nowości

Changes made from version 1.30 to 1.40:</p><p>- Fix bug where wind power was always disabled</p><p></p><p>Changes made from version 1.20 to 1.30:</p><p>- Support for the fenix5/5s/5x Plus series</p><p></p><p>Changes made from version 1.10 to 1.20:</p><p>- Support for the Forerunner 935 APAC and fenix5/5s/5x APAC</p><p></p><p>Changes made from version 1.00 to 1.10:</p><p>- Support for the Foreru...

Informacje dodatkowe

Uprawnienia

Ta aplikacja wymaga dostępu do następujących zasobów:

  • Transfer danych przez radio ANT do i z czujników innych producentów
  • Uruchom w tle, gdy nieaktywne (może skracać czas pracy baterii)
  • Wymieniaj informacje przez Internet
  • Nagraj dodatkowe informacje w plikach aktywności
  • Pozycja GPS
  • Historia tętna, barometru, temperatury i wysokości
  • Profil fitness użytkownika Garmin Connect™
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
Średnia ocena: (Oceny: 40)

Sergio
11 stycznia 2019 | Wersja 1.40

I don't know why but since the last update my power data low alot. For example, on December 2018, runing at 5:38 give me 310 Avg Running Power, on January 2019 running at 5:29 give me 77 Avg Running Power!!!!!!!!!!!!!!!

Fran
10 stycznia 2019 | Wersja 1.40

Good application, but it's the same as Juan Maria Jimenez that in the intervals doesn t calculate the average of the Watts.

Pablo de las Heras
13 grudnia 2018 | Wersja 1.30

As Juan Maria Jiménez said on December 4th, I have de same problem with my Fenix 5. If you need it, I can send you pictures of this problem. I imagine this is a software mistake but if only it was solved as soon as possible. If it wasn't for this problem, I would give 6 stars without doubt.

Juan Maria Jimenez
4 grudnia 2018 | Wersja 1.30

Good morning, There is a problem with the Garmin Labs applications with the watts in Garmin and it is the following. when I do series, with LAPS, when I look at the summary, it does not take out the average watts of the LAP ... In the graph I'm going to 450 watts, but then the average of the series comes out at 380 watts. It would be fine, that this ruling will be solved. Understand the problem. If you leave me an email I would send the images.

Syam Tawakkal
4 grudnia 2018 | Wersja 1.30

Not working on fenix 5x plus. Disappointing..

Sotiris Diamantopoulos
2 grudnia 2018 | Wersja 1.30

Please provide an option to smooth values. In its current implementation, running power is only useful as a post-exercise tool. Trying to use it in real time, as I run, power values are fluctuating too much to be of any use. Essentially, I am trying to smooth the values myself, averaging the last 3 seconds, which is the last thing a runner needs to do while running or racing. An option to smooth values with a variable smoothing window (e.g. 3-10s) would render this datafield much more useful.

Ralph
30 listopada 2018 | Wersja 1.30

I really do like to have the running with Power option on Garmin. Unfortunately very little is published and google only finds over and over the same reviews .... I read a lot about running on power on: https://thesecretofrunning.com/wp-content/uploads/2018/01/31-Second-test-of-Garmin.pdf and their theory is very solid. They can exactly calculate the power numbers and confirm stryd values. Your numbers seem to follow a different approach and the watts are approx 30% higher. I would appreciate if you can add a config option to select which power model to follow. This would allow to follow training plans designed for the power ranges displayed by stryd. Thanks for a brief answer and considering for an update release ! Would be nice to have for the spring training season ;)

Krzysiek
21 listopada 2018 | Wersja 1.30

Good app! Just one question - need some guidance on setting the zones. Can anbody help? ☺

RafaelMonge
5 listopada 2018 | Wersja 1.30

Hello good day I write to you in relation to the "app running power" I would like to train with the power parameter while I run, but currently it is not possible to set up training with power. I give an example done with trainingpeaks: Workout Details Warm up 2.00 km @ 277-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Active 3.00 km @ 415-454 W Zone 4 - Threshold-Zone 5 - High Intensity Recovery 1.50 km @ 296-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Cool Down 1.00 km @ 198-237 W Zone 1 - Recovery / Walking Is there any way for fenix 5 to warn me that I am within the correct range of power at each step?

Mars
27 października 2018 | Wersja 1.30

I have a Fenix 5 plus and it works well. From my runs with both the RD Pod and Stryd the readings give different numbers, but the overall curves follow similar patterns. I don't understand why the RD Pod can't give pacing information like Stryd. My suggestion would be for this app to work with any power sensor. I'd use the power gauge data field instead of Stryd's Race Power which I really don't like.

Stephen Hagan
9 października 2018 | Wersja 1.30

Doesn't appear to be working with my Fenix 5x.

Mika Särkelä
7 października 2018 | Wersja 1.30

This could be useful with the wind compensation, but I have tried all the tricks and it remains disabled. I am based in Finland and I can't find the geographical coverage of wind stations anywhere, is that information provided somewhere?

Marc
1 października 2018 | Wersja 1.30

Don't do it! Training peaks will give crazy TSS scores instead of rTSS!

doh
21 września 2018 | Wersja 1.30

Cada vez me sorprendo más con las posibilidades que ofrecen. Ésta es una de ellas. Con el hrm run y un fr 645 music, excelente.

yannlux
18 sierpnia 2018 | Wersja 1.30

Works perfectly. Don't believe people comparing to stryd, ratio with cycling is not making any sense (run must be more difficult as not carried by the bike) Multiple comments with plus are not making sense, is he only wearing a chest strap.

George Whitehouse
9 sierpnia 2018 | Wersja 1.30

Yep not working on 5x plus. Disappointing.

Fatty Boomboom
6 sierpnia 2018 | Wersja 1.30

Totally not working with plus series, despite the compatibility listing. I will update it again once it works.

Fatty Boomboom
6 sierpnia 2018 | Wersja 1.30

Totally not working with plus series, despite the compatibility listing. I will update it again once it works.

Fatty Boomboom
6 sierpnia 2018 | Wersja 1.30

Totally not working with plus series, despite the compatibility listing. I will update it again once it works.

Anders
23 lipca 2018 | Wersja 1.30

Rd pod shows higher than hrm-strap and even more against stryd. Rd pod gives"better" results in everything it calculate.

Nick______H
2 lipca 2018 | Wersja 1.30

When using hrm run this gives readings 20-30% higher than stryd. I believe the stryd values given they align to my cycling power. Give it a try but don’t trust the data with this version. Would be interesting to know how it works with the garmin rd foot pod (stryd is great but not waterproof)

Mali Copo
27 czerwca 2018 | Wersja 1.20

I really like the Datafield and I think it is useful. Howewer, why is it not compatible with my new Fenix 5 Plus?! Will there be an update soon? Otherwise I might replace the 5 Plus to it's predecessor.

Peter Balling Stockmann
26 czerwca 2018 | Wersja 1.20

Very disappointing that the app is not updated to be used on the Fenix 5x Plus model

Luke
26 czerwca 2018 | Wersja 1.20

It is great with the Fenix 5, but it does not work with any of the plus models, Fenix 5/5s/5x plus not compatible. So it does not work with Garmin's newest devices, even though it is advertised as compatible on their website. I will revisit and re-review when it does work.

Pauline Baggarly
21 czerwca 2018 | Wersja 1.20

A little disappointed. The elevation seems to be wonky? Not sure if watch (FR 645 non music) or if I pause watch a lot on this run (its super humid, so hill repeats are torture). But the elevation on my run doesn’t show accurate elevation in or around the amount it should show. Trying again Saturday for a 12miler and we will see.

Na razie brak dostźpnych danych.