Four Fields

Opis

Now with Open Weather Map data!NOTE: to access weather data, it MUST be a watch running CIQ 2 or 3, so won't work on things like the forerunner 23x,630, the fenix 3 devices, and similar, such as the D2 BravoYou need an APIkey to use the OWM data. Please see https://openweathermap.org/appidTo set your APIkey for the app, you use App Settings. Here's a basic "How to" for that: https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store

Nowości

0.21 - added Open Weather Map data, support for the va3 Music LTE (including an icon for when LTE is connected)0.19 -added setting for leading zero in hours (disables AM/PM in 12hr mode)0.17 - added icons for data fields. Set "ID used in DFs" to Icons if needed. Make sure the new version is installed or you won't see icons

Informacje dodatkowe

Pierwsze wydanie: 21 grudnia 2017
Updated: 21 października 2020

Wersja: 0.24

Skontaktuj się z producentem
Oznacz jako niewłaściwe

Uprawnienia

Ta aplikacja wymaga dostępu do następujących zasobów:

Uruchom w tle, gdy nieaktywne (może skracać czas pracy baterii)
Wymieniaj informacje przez Internet
Pozycja GPS
Historia tętna, barometru, temperatury i wysokości
Profil fitness użytkownika Garmin Connect™

Approach® S60
Approach® S62
Captain Marvel
D2™ Air
D2™ Charlie
D2™ Delta
D2™ Delta PX
D2™ Delta S
Darth Vader™
Descent™ Mk1
Descent™ MK2, Descent™MK2i
First Avenger
Forerunner® 245
Forerunner® 245 Music
Forerunner® 645
Forerunner® 645 Music
Forerunner® 745
Forerunner® 935
Forerunner® 945
fēnix® 5, quatix® 5
fēnix® 5 Plus
fēnix® 5S
fēnix® 5S Plus
fēnix® 5X, tactix® Charlie
fēnix® 5X Plus
fēnix® 6
fēnix® 6 Dual Power
fēnix® 6 Pro, fēnix® 6 Sapphire
fēnix® 6 Pro Dual Power
fēnix® 6 Pro Solar
fēnix® 6 Solar
fēnix® 6S
fēnix® 6S Dual Power
fēnix® 6S Pro, fēnix® 6S Sapphire
fēnix® 6S Pro Dual Power
fēnix® 6S Pro Solar
fēnix® 6S Solar
fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
fēnix® Chronos
MARQ™ Adventurer
MARQ™ Athlete
MARQ™ Aviator
MARQ™ Captain, MARQ™ Captain: American Magic Edition
MARQ™ Commander
MARQ™ Driver
MARQ™ Expedition
MARQ™ Golfer
Mercedes-Benz Venu®
quatix® 6
quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
Rey™
Venu®
Venu® Sq.
Venu® Sq. Music
vívoactive® 3
vívoactive® 3 Mercedes-Benz® Collection
vívoactive® 3 Music
vívoactive® 4, GarminActive
vívoactive® 4S, GarminActive S
vívolife

Średnia ocena: (Oceny: 35)

Napisz recenzję

Zoe Ali
30 października 2020 | Wersja 0.24

all good so far except the temperature has stopped displaying. how do i get the temperature back?

Odpowiedź producenta
30 października 2020, jim_m_58

If the field isn't being displayed, use https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store to set it to be displayed. If it's just showing "--", change a field to be OWM Status", and use contact developer to let me know what it says. -104 for example, means the phone isn't connected when the watch face is trying to get an update.

Anthony Turvey
25 października 2020 | Wersja 0.24

This really is a great watch face. Extremely clear, useful and efficient. Thank you to the developer!! I especially love the OWM data fields. I had to do some searching to figure out what it was all about, but wow what a great feature. BTW, why does the OWM barometric pressure field always stay yellow? I assume green means valid data (?) and temperature does update to green. But pressure is always yellow. Does that have a different meaning? Also it seems some very basic documentation would add to the value. I had to read the reviews to figure out what the move bar was. Anyway, very nice WF, please continue to develop and maintain this one. Thank you!

martijn reinalda
20 maja 2020 | Wersja 0.23.2

My favorite sofar, wish there was an option to make the data and battery field a bit larger and the time a bit smaller. And I’m still unsure what the dotted line at the botttom indicates

Odpowiedź producenta
20 maja 2020, jim_m_58

The line at the bottom - a large segment and up to 4 smaller ones is your "move bar". The larger part displays after too few steps in an hour, and the smaller ones, for each additional 15 minutes. To clear them all, walk 200 steps without stopping.

Ryan Storzbach
23 marca 2020 | Wersja 0.23.2

Love the new OWM data!

Gordon
13 lutego 2020 | Wersja 0.23.2

What's are the zz at top of WF?

Odpowiedź producenta
14 lutego 2020, jim_m_58

That's if you are between your configured sleep and wake times.

Michal
12 lutego 2020 | Wersja 0.23.2

It is GREAT and very clear watch face! Any possibility to get dd-mm-yy date on info field? and then disable date below time to get it bigger?

Jack
25 września 2019 | Wersja 0.23.1

Very nice watch face. Simply enough information are shown. Very easy to configure. Thanks.

Mark Wade
22 sierpnia 2019 | Wersja 0.22.2

This is awesome, love it, perfect combination of Easy-to-Read customizable and not too much going on!

Papa Carlos
22 kwietnia 2019 | Wersja 0.22

Good

Mike Adderley
12 lutego 2019 | Wersja 0.21

OWM Widget works but when I use this watch face the temp and current conditions from the OWM do NOT work...

Odpowiedź producenta
12 lutego 2019, jim_m_58

Yes, that's only available on watches that run CIQ 2 or 3. The CIQ 1 devices like the D2 Bravo doesn't support getting the weather with any CIQ watch face. I'll note that in the description.

David
8 stycznia 2019 | Wersja 0.20

My favorite watchface!

Robyn Kane-Berman
23 lipca 2018 | Wersja 0.18-upd1

Great watch face - thank-you. How do I get the colours on the face as in the photo, please? I only have black, white and the step counter in purple,

Odpowiedź producenta
23 lipca 2018, jim_m_58

This like many CIQ apps uses app settings for that - from your phone or with Garmin Express. Here's a basic "how to" for app settings: https://forums.garmin.com/forum/developers/connect-iq/connect-iq-showcase/115055-how-to-app-settings

David Giraldo
26 czerwca 2018 | Wersja 0.18-upd1

Minimal yet efficient. I love it. EXACTLY what I was looking for. The other version just had too many data points to look at. One thing though, what the heck is that purple bar above the battery icon????

Odpowiedź producenta
27 czerwca 2018, jim_m_58

That's the move bar. The first segment displays when you haven't taken enough steps in an hour, and the 4 smaller ones, for each additional 15 minutes. With all 5, if you walk about 200 steps they'll all clear.

Jayakumar R 🇮🇳
6 czerwca 2018 | Wersja 0.18

Very simple configuration interface... Good use of real estate. Love it! The only thing I am not sure of is the exclamation mark next to the Bluetooth icon. Is there a way to make it work or remove it in vivoactive 3?

Noel SUP
14 maja 2018 | Wersja 0.17

Great watch! Looks great with lots of DFs clearly presented. Thanks!

Ungvári Gergő
23 kwietnia 2018 | Wersja 0.17

Pretty awesome watch face! The only thing, that I really miss is the seconds indication. Sometimes it shows up, sometimes it goes away. I would really appreciate, if you could fix it and make it available at all times. Other than that, highly recommended!

Odpowiedź producenta
23 kwietnia 2018, jim_m_58

Seconds are only displayed all the time on the newer watches, aand for example, on the Fenix3 and d2bravo, will only display for about 10 seconds after a gesture. It's a matter of the hardware itself, so nothing can be done in the code to change this.

sandra brunner
8 kwietnia 2018 | Wersja 0.17

i have 1 question.. if i set moonrise it shows Wan C. what does this mean? lovely regards sandra

Odpowiedź producenta
8 kwietnia 2018, jim_m_58

That's moon phase and not moon rise. "Wan C" is Waning Crescent" "This intermediate Moon phase is the last phase of the lunar month. It starts just after the Third Quarter Moon and lasts until the following New Moon."

Cairn
13 marca 2018 | Wersja 0.15.1-upd1

This is the best face, for me that I've tried (and I've tried all of them as of March 2018). One feature request would be to have the option of a character/graphic for some of the fields. E.g. a heart for pulse, little man walking for steps, etc.

Wilmar
9 marca 2018 | Wersja 0.15.1-upd1

Great WF, clean and clear. Contains all I need.

Rick Mitchell
19 stycznia 2018 | Wersja 0.15

Thanks for the 30 min option on time zones! Took this already awesome face to an even higher level.

Rick Mitchell
15 stycznia 2018 | Wersja 0.14

Any chance to get a +30 min for the few time zones that are UTC +30?

Odpowiedź producenta
16 stycznia 2018, jim_m_58

I considered that, but wasn't sure which +30minte timezones made sense. In the future, I might do something like add a "plus 30" checkbox when a tz is picked. I'll put it on my list as something to look into.

arTee
6 stycznia 2018 | Wersja 0.11.4

Could there be an option to disable seconds? Thanks! Otherwise great watch face!

Martin Hloben
27 grudnia 2017 | Wersja 0.11

Very nice watches. Could you please modify diacritical marks, european east, thursday "štrvrtok" shows strange marks at first letter š. Thanks a lot

Odpowiedź producenta
28 grudnia 2017, jim_m_58

I'll be posting an update today or tomorrow where the font used for the data fields is also used for the date, so this should work for you at that time.

Gordon
26 grudnia 2017 | Wersja 0.11

Absolutely love this face.. Especially the new fonts.. Nice and clean and just shows me the data I want to see..also seems very low on battery.. Would it be possible to have the option to use the new font for the time and date and possibly have icons for steps and heart rate etc? VA3 user.

Odpowiedź producenta
27 grudnia 2017, jim_m_58

I use custom fonts for the date and time to make it easier to adapt to different devices. (they are always a known size) For the data fields I was above to find a standard font that would work given the size of the data fields themselves. The design of this watch doesn't allow for icons in the data fields.

Allalin72
26 grudnia 2017 | Wersja 0.11

Thats it! Thank you!

Na razie brak dostźpnych danych.