App Icon

IQ Map Receiver (Waypoints and Tracks)

Opis

A Tool to send Waypoints, Tracks (Courses), Locations and Segments from mobile phone mapping application (Google maps or OSMAnd+) and GPX files to Garmin Fitness device over Bluetooth </p><p></p><p>!! No Internet required for Track Upload !!</p><p></p><p>-- general hint: Start Button is for Waypoint transmission control, menu button is for track transmission control --</p><p></p><p>Works best on Epix and Fenix 5 series.</p>

Nowości

2.4.6 full support of edge 830/530 WiFi always on mode (NEW! setup in Garmin Connect), edge 520/530 button mapped</p><p>2.4.5 support of edge 530/830 and forerunner 945 added</p><p>2.4.4/a more data in the statistics menu, new menu layout for connect iq 3.x devices that includes color coding of FIT server data: blue: tracks/routes/course, red: locations, green: segments</p><p>2.4.3c need to add permission request for "persisted locations" to store Waypoints on old devices (Connect IQ V1.x: Epix, Fenix 3 series, D2 Bravo)</p>

Wymagania

Companion App

Android App on Google Play

Informacje dodatkowe

Uprawnienia

Ta aplikacja wymaga dostępu do następujących zasobów:

  • Wymieniaj informacje przez Internet
  • Zapisane informacje, takie jak kursy, trasy, punkty, ślady i treningi
  • Zapisywanie pozycji na liście pozycji w tym urządzeniu
  • Pozycja GPS
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore Edge® Explore
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • epix™ epix™
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
Średnia ocena: (Oceny: 82)

Balazs Szogi
19 maja 2019 | Wersja 2.4.5

Great app, however when using the course upload function, tutn by turn navigation is not working (although it does when using Garmin Connect for the same purpose). Any suggestions?

Odpowiedź producenta
19 maja 2019, schlupp73

Hi Balazs, Well the data for turn by turn navigation of to be taken from somewhere. I only support the route data when you create a track with OSMand. You can enable the support in the settings. I do not use additional commercial routing services. Kinds

Daniel Feuerstein
11 maja 2019 | Wersja 2.4.5

Good app, but i can't bring a track to my fenix 3hr. If I share a route in osmand with iq the app does not find my watch. waypoints are working.

Odpowiedź producenta
12 maja 2019, schlupp73

Hi Daniel, I'm sorry. Track transfer is not supported by the older Fenix 3 device. Required features are only available in Fenix 5 devices or newer. Kinds

Gabi D
23 kwietnia 2019 | Wersja 2.4.3b

I test it a few month ago with my fenix 3 and it worked fine. After the latest update I couldn't sync waypoints to my fenix 3. I hope you will fix it soon.

Odpowiedź producenta
24 kwietnia 2019, schlupp73

fixed. as you see in the change notes, the rights management of Garmin changed so the older API was not usable any longer. should work fine now. please leave a note if you mind for some feedback.

Zbigniew
13 kwietnia 2019 | Wersja 2.4.2b

Works very well. Helps a lot with fast uploading of locations

Keith Williams
26 stycznia 2019 | Wersja 2.4.2b

Love this app on my Fenix 5 Plus. Wish I could install it on my Edge Explore cycle computer.

Odpowiedź producenta
24 kwietnia 2019, schlupp73

latest versions do support the edge devices now. please have a look and leave some comments. Kinds

Luca
30 grudnia 2018 | Wersja 2.4.2b

have a fenix 5. managed to load waypoint from google map fine. did not managed to download a gpx file unfortunately. need detailed help to do so. moreover, since goggle mail do not support gpx generation, how can i create a gpx file from the mobile (instead of using other pc based systems?) thanks if you can reply luca

Odpowiedź producenta
24 kwietnia 2019, schlupp73

Hi Luca, to sum up for all here. I would use OSMAnd+ from the play store in Android to create gpx files for Waypoints or tracks (no need to buy anything or reinvent the wheel). you can directly share from OSMand application to IQ Mapreceeiver, and no internet is required when sufficient maps are installed. Kinds

Nuno Pinto
4 listopada 2018 | Wersja 2.4.2b

It works for way points so I am happy, however I can't find instructions for all the features

Kroezcontrol
10 września 2018 | Wersja 2.4.2b

This app will also be very nice for some edge devices, like the 520m

Odpowiedź producenta
24 kwietnia 2019, schlupp73

Hi Kroezcontrol, should be supported now.

Cowboyzer
24 sierpnia 2018 | Wersja 2.4.2b

App intelligente peccato non sia possibile inserire coordinate UTM.

Lloyd Edwards
29 kwietnia 2018 | Wersja 2.4.1

This app has potential but i cant get it to work. All I want to do is download a gpx file to my mobile then send it to my Garmin Fenix 5.. i didnt think it would be this hard! This app works on waypoints but every gpx file gives me the following error message (gpx conversion ok...but timestamp overwritted from source switch auto calculation off?). There are quite a few setting options and not sure exactly what they all do. Not to sure what 'Fit Server' ? When should i check box 'Waypoint and App/Widget? Any advise kindly welcomed. Thanks

Odpowiedź producenta
29 kwietnia 2018, schlupp73

Hi Lloyd. Very good. You didi the first step and impprted a gpx file, the tool added timestamp data. Next step is to start the Fenix iqmapreceiver app or widget, press the menu button, select IQReceiver and request for e.g. the last imported track. A track can only requested from a watch, it can not be send from a phone instead. You can contact me directly when you have further questions.

Albert
19 marca 2018 | Wersja 2.4.1

Funciona molt bé en l'Epix , però només per enviar WP, no sé enviar una ruta sencera important-la d'un GPX. Sinó donaria les 5 estrelles

Odpowiedź producenta
19 marca 2018, schlupp73

Hello Albert. Thx. I target to use the garmin features on the devices to use the full mapping from osm. Route transfer needs support that is only provided by the new Connect IQ 2.x devices (e.g. fenix5). Sorry

Christophe Emery
17 stycznia 2018 | Wersja 2.3.2-upd1

Installed both Apps (Android & Garmin) easily then imported a GPX File with Waypoints inside (Android Manner). 2 + Begin & End Waypoints dicovered and then uploaded through BT to #fenix3. Only the Elevation is missing. GREAT Tools and at least something usable to upload Waypoints without Cable or Wifi.

LemoNidas
11 stycznia 2018 | Wersja 2.3.2-upd1

Garmin Fenix 3 with Google maps on androind combo works great.

Patrik Lindgren
30 grudnia 2017 | Wersja 2.3.2-upd1

Does not work on Fenix 3

Odpowiedź producenta
24 kwietnia 2019, schlupp73

should work fine. do you have any issues?

TT
7 grudnia 2017 | Wersja 2.3.2-upd1

Does not work on Fenix 3 HR with Nexus 6P 8.0

Odpowiedź producenta
24 kwietnia 2019, schlupp73

should work fine. do you still have any issues?

Artur Kub
2 listopada 2017 | Wersja 2.3.2-upd

When ios application?

Odpowiedź producenta
24 kwietnia 2019, schlupp73

i´m not a Mac user, sorry.

asamartino
18 października 2017 | Wersja 2.3.2-upd

Do not work for Quatix 3? Will it work

Odpowiedź producenta
24 kwietnia 2019, schlupp73

the Quatix comparable to the Fenix 3 series should work fine. please use the latest version

wissler
14 października 2017 | Wersja 2.3.2-upd

Super appli ! A ce jour c'est la seule app qui permet de transférer des tracks et waypoints du téléphone mobile vers la montre Garmin, sans avoir besoin d'une connexion internet.

Sharon
9 października 2017 | Wersja 2.3.2-upd

I've been searching for apps that would send coordinate of any location I found on Google Map to my new Garmin Femix 5X and this is the only app that seems to be able to do exactly what I want. I installed it last night and at first it does seem to work when I shared to location found on Google Map to IQMapReceiver. It only fired up to screen with empty fields of location name, longitude and latitude for me to fill in. After tweaking the setting a bit (enable Internet access and MPRS ) it did automatically populate those fields when I shared a location from Gmap. However, the values of longitude and latitude it entered does not match those of the location I just shared. Bugs?

Nico G
28 lipca 2017 | Wersja 2.3.2-upd

Works fine on fenix 3 / companion apps for waypoint but i'm not able to import gpx / fit track. Fit server is enable, but il always a null waypoint instead off track. What is the exact procedure to send gpx / fit file to fenix 3 ? does it work ?

maggotbnr
28 maja 2017 | Wersja 2.3.1

no funciona en mi fenix 3 desde la ultima actualizacion

Odpowiedź producenta
24 kwietnia 2019, schlupp73

should work fine. please use the latest version

Andrew Kong
27 maja 2017 | Wersja 2.3.1

Does not work on Fenix 3 HR with LG V20

Odpowiedź producenta
24 kwietnia 2019, schlupp73

should work fine now, please update to the latest version

AgentClepp
26 maja 2017 | Wersja 2.3.1

The new track-up-load frature works fine on fenix 5s!

tiblam
13 kwietnia 2017 | Wersja 2.2.13-u

Really happy that you may this possible, because I search everywhere in the garmin parameters how to create a position, and it wasn't possible. Furthermore, with the mobile app, this is easier. Thanks again !

alezz
27 marca 2017 | Wersja 1.1.12

I have both Fenix3 and VivoactiveHR. I send waypoints to Fenix3 with IQ Map Receiver at now. After this connect both watches to computer, go to folder LOCATION on Fenix and copy file LCTNS.FIT to the folder NEWFILES on VivoactiveHR. After this got waypoints on VivoactiveHR. It is terreble pocedure, but only one way wich I find. Online conversion gpx to fit http://www.gpsies.com/convert.do?language=en not work for vivoactive

Na razie brak dostźpnych danych.