App Icon

Sun - Anti-Aliasing

Beschrijving

Unlock the extra options for just $1.99US: https://connectiq-devs-store.com/products/sun-anti-aliasing</p><p></p><p>SETUP STEP: Turn on GPS until you get a green status on any activity to save your last position and everything will be fine. Starting a run/walk should do it. No need to save the activity but times are calculated based on your GPS location for accurate results.</p><p></p><p>The activation code will be immediately accessible on the checkout page. You will also receive the activation code typically in less than 5 mins (*Please verify your spam folder).</p>

Nieuwe functies

Follow the SETUP STEP! Dynamic fields are displayed when the watch is in "High power" mode. Bringing your arm up and to your face will do just that. (Looking at your watch) This is detected by the watch and not the watch face. During that time, the watch will update more frequently for a few seconds. I'm using this time to cycle between the primary data and the dynamic data. *Currently, it will show your primary data for 1 seconds before changing... so try holding the position for a few seconds. </p>

Vereisten

Vereiste hardware

Hardware aanschaffen

Aanvullende informatie

Machtigingen

Deze app vereist toegang tot:

  • GPS-locatie
  • Hartslag-, barometer-, temperatuur- en hoogtegeschiedenis
  • Approach® S60 Approach® S60
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívolife vívolife
Gemiddelde beoordeling: (153 beoordelingen)

Itamar Lourenço
23 juni 2019 | Versie 1.7

Have the paid version for a while now but now the dynamic fields seem to stopped working. Tested in Descent, F5X Plus and MARQ Expedition. Really like this watchface, would just ask for one more field and for the dynamics fields to work, specially the green arc!!

Reactie van ontwikkelaar
23 juni 2019, PlayItLoud

Garmin did a recent update with broke the dynamic fields. Hopefully we will get a fix soon OR I'll let you know if I find a workaround. If the green arc is full is because you didn't followed the setup steps from the watch face description.

Stone
19 juni 2019 | Versie 1.7

I would like to ask my outer circle settings, how to set up your example Figure 1, is it dynamic? My current look is just a full circle of colors, not moving at all. Thank you!

Reactie van ontwikkelaar
23 juni 2019, PlayItLoud

Please make sure you enter your license code by respecting the Uppercase letter. Also, don't add any extra spaces at the end. Pressing enter will add one on some phone.

Andy Norman
5 juni 2019 | Versie 1.7

I love this watch face on my FR645. I paid the couple of bucks to have the full version. Doesn’t crash on my watch as opposed what I’m hearing about the Fenix.

Allalin72
2 juni 2019 | Versie 1.7

Thanks for update! The only bug i found is that the dynamic fields stop working, after the watch says „MOVE!“. A bug, that i wrote via contact developer link a while ago. But got no response. Other watchfaces does have dynamic fields to, but they work. Contacted Garmin also. I should contact developer. I also see no reason for a bug in garmin firmware, because your watchface „ Racing - Anti-Aliasing“ with dynamic fields is working. If there where a firmware bug, the Racing WF also should show same reaction as SUN WF ? Shoudn’t it ?Five stars, if bug would be removed.

Reactie van ontwikkelaar
23 juni 2019, PlayItLoud

Racing and Sun share the same code for handling the dynamic fields.

Владимир Шепель
30 mei 2019 | Versie 1.6.1

Very bad, buggest, crashed watchface! Don't buy it!

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Paul Ross
29 mei 2019 | Versie 1.6.1

Crashed the fénix 3 and had to reset and add it as a new device. Don’t download and install from this developer! Also no response from them I can see! How is this even still available!?

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Gavin Knox
29 mei 2019 | Versie 1.6.1

You just broke my Fenix 3 you #%#@.

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

Hey you #%#@. A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Anton
27 mei 2019 | Versie 1.6.1

Looks nice, but crashes Fenix 3 HR during sync with phone. Seems to be working though while Bluetooth is off. I’d love to use it for a while once it no longer crashes.

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Bence
25 mei 2019 | Versie 1.6.1

Constant crashes on Fenix 3. I love this face, I payed for it, please fix!

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Piotr
22 mei 2019 | Versie 1.6.1

Love the face, but cannot buy full version with Apple Pay :( transaction unsuccessful

MarkE70D
21 mei 2019 | Versie 1.6.1

Love the design of this watch face, with the arc representation of sunrise / sunset. A very clean design which covers all the basics which I look for.

Michał
21 mei 2019 | Versie 1.6.1

Finix 3 hr. Aplikacja zawiesza zegarek.

Kelly Sikorski🇨🇦
19 mei 2019 | Versie 1.6.1

Constantly crashes my Fenix 3 HR. Please fix it!

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Barrciak
19 mei 2019 | Versie 1.6.1

Restarts when Bluetooth is on. Don't measure hr sometimes, especially entire sleep hours. At this time is completely useless. I've even bought premium to check if customisation helps and it doesn't. Needs update.

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Henryk Gajek
19 mei 2019 | Versie 1.6.1

Wspaniała była do ostatniej aktualizacji, teraz cuda się dzieją. Mój Fenix 3 podczas łączenia z bluetooth co chwila się restartuje. Odinstalowałem mimo wykupienia. Do poprawy.

Reactie van ontwikkelaar
30 mei 2019, PlayItLoud

A watch face can't crash a watch. A firmware bug can. I have reported this bug to Garmin a long time ago. Here: https://forums.garmin.com/developer/connect-iq/f/discussion/7138/watch-face-crash-generate-a-err_log-txt-but-no-ciq_log-txt/48252#48252 Still waiting for a fix and it seems that it's getting worse. Feel free to ask Garmin to fix your firmware by using the forum link. Maybe if there is enough requests they will look into it but I done getting blame for something that is out of my control. For this reason. I will be removing the support for older devices Fenix 3, 3hr etc...

Bob
18 mei 2019 | Versie 1.6.1

After update 1.6.1 my Fenix 3 will reboot every time I turn on Bluetooth. Tried other watch faces to see if the same happens, but all other watch faces work fine with Bluetooth. I'm guessing update 1.6.1 has coursed some kind of issue which I hope can be corrected.

Allalin72
18 mei 2019 | Versie 1.6.1

Paid version at fenix 5X: after the watch says „MOVE“, the dynamic field switch disappears. Have to go to a widget and back, than its working again till watch says „MOVE!“ again.

Bas Fluijt
16 mei 2019 | Versie Version 1.6

I was looking for the Suunto Spartan main watchface.. you did a great job replicating and improving that sunrise/sunset watchface. Thanks for writing this code. Worth the 2 dollars!

Junior DelGiorno
20 april 2019 | Versie Version 1.6

Used multiple faces on my Fenix 5 and by far this one has been the most intuitive to use and customize. Haven’t had any software lockup’s either. Simple, effective, but robust. A+

Sebastian B.
12 april 2019 | Versie Version 1.6

Very nice face but watch crashes many times! Fenix 3

Jinda
12 april 2019 | Versie Version 1.6

Great design and aesthetic (very Suunto-like) but watch widget switching lag is serious and this watch face makes the entire watch slow.

Ben Prince
2 april 2019 | Versie Version 1.6

This has been my daily use watch face for months now and I love it. The dynamic fields are well worth paying for. I haven't had any issue at all with this watch face and would highly recommend.

Barrciak
28 februari 2019 | Versie Version 1.6

Very elegant and useful watchface. Plethora of options to choose from. So why just two stars? Present version is very unstable: each day watch restarts at least two times(fenix 3 hr). I've been using it over two weeks, testing different options, avoided beta twilight, used all premium options etc. For example using hr graph can cause watch to enter into restart loop. Contacted developer but without response. I'm waiting for some update dough because design is flawless...

midwinterphoto
7 februari 2019 | Versie Version 1.6

I am experiencing my watch randomly resetting. (Fenix 3HR) however i love the style and design of this watch face. Kudos! Easily 5 stars when that is resolved.

FERELI
2 februari 2019 | Versie Version 1.6

Greatest Watch Face!!

Nog geen statistieken beschikbaar.