A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>
0.24.8 - added support for the Instinct 2</p><p>0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66
Deze app vereist toegang tot:
Mehdi
22 maart 2023 |
Versie 0.25
Application fiable, retirer la montre du poignet pour avoir la température exacte du lieu pour pas avoir la température corporelle
Elsy 🇳🇱
21 februari 2023 |
Versie 0.24.10
Handige widged om de temperatuur te zien op mijn Fenix7ss met mijn Garmin Tempe.
Grace
17 februari 2023 |
Versie 0.24.10
Al Duncan
9 januari 2023 |
Versie 0.24.10
Just downloaded and set up this widget on my tactic charlie, works perfectly and is exactly what I was looking for. Great to be able to see both temp readings on one screen, simple perfection !
Naomi
28 december 2022 |
Versie 0.24.10
Jen Emig 😺🐴☃️🍫
9 december 2022 |
Versie 0.24.10
Easy access to reading from Tempe. I wish it would show the high & low readings.
Dmitriy
28 juli 2022 |
Versie 0.24.9
Hi! Can you please add temperature offset option for both internal and Tempe sensors? For example, I compared sensor readings to accurate thermometer and I want to calibrate it. Many watchfaces have this feature. The app itself is great and very simple.
Reactie van ontwikkelaar
30 juli 2022,
jim_m_58
That's pretty impossible to get right with the internal sensor. Take the watch off, and it wouldn't be the same. If the ambient temp is high, it wouldn't be the same as if it was low. That's why this will also work with a Tempe, so you can get a much better reading for ambient
Niki
17 juli 2022 |
Versie 0.24.9
TheSalvageMind
22 februari 2022 |
Versie 0.24.8
Very pleased with performance and clean at-a-glance look. Bravo!
Nikos Argiropoulos🇬🇷
23 januari 2022 |
Versie 0.24.5
Bronwyn Roberts
15 januari 2022 |
Versie 0.24.5
How can the temperature setting be changed to read only as Celsius?
Eric Nadeau
12 januari 2022 |
Versie 0.24.5
Neat little widget , have yet to try it with a Tempe but works pretty well without it. As indicated by the dev , if you want ambient temperature just remove the watch for 30 mins to get an ambient temperature reading !
Vojko Rajh
21 december 2021 |
Versie 0.24.5
Hi! Widget works well on my Venu 2, but I saw that Edge 830 is not supported. Though it shows temperature on the screen when it's 0°C or above. Minus data are not shown. Is there a chance that Edge will be supported in the future?
Gabriele
21 december 2021 |
Versie 0.24.5
on the display of my approach S60 the temperature that appears is not correct. Now for example 74.6 ° ??
José 🚵
7 december 2021 |
Versie 0.24.5
Hello, I cannot see the internal temperature of my Fenix 3 watch. I see the following: Line 1: temps 0.24 Line 2 : Tempe Line 3 : two blue line (I do not have my Tempe sensor right now) Line 4 : (connecting) So nothing about the internal watch temperature
Carnio.f
5 december 2021 |
Versie 0.24.5
Andrew
23 november 2021 |
Versie 0.24.5
Jacqueline Staal
21 november 2021 |
Versie 0.24.4
Entdecker
10 november 2021 |
Versie 0.24.4
The best temp widget in my opinion. It would be perfect if it showed min/max from Tempe sensor. Thank you!