Pavels
13 januari 2019 | Versie 2.68
Great app, love it!
But can we get an option to turn off elevation alerts? It's not needed for me to have it vibrate every time I climb up or down... I know I'm climbing anyway! :D
Reactie van ontwikkelaar
13 januari 2019, jim_m_58
In app settings, turn off the "Dots for Floors On Chart"). The wording changed to
"Floors Alert and Show on chart" in the current version.
So you can already turn it off.
Jan Džačovský
5 januari 2019 | Versie 2.68
Any plans adding map support on Edge devices?
Reactie van ontwikkelaar
6 januari 2019, jim_m_58
Yes, for the edge 1030, but it's taking a bit longer than for the fenix 5x and fenix 5+ devices.
ClaRon77
2 januari 2019 | Versie 2.67
After two days of attempts of registering my track I've uninstalled it and chose another one.
I used it on a Vivoactive 3. It got continuously paused while I was moving (a vibration informed me every time of them). It lost a lot of the gps and altitude data. I'm sorry to give a bad review but my experience with this app has not been so good. There are others that offer more and that I used with no problems
Reactie van ontwikkelaar
2 januari 2019, jim_m_58
I'm not sure what you mean by "registering my track". The only way to pause the app is by pressing the button, so it shouldn't happen randomly. Are you sure you are seeing this with Hike2 and not another app? Please use Contact Developer so we can sort this out
iRpz ®
7 oktober 2018 | Versie 2.64
Esta aplicación cuenta los pasos?
Reactie van ontwikkelaar
7 oktober 2018, jim_m_58
On devices that track steps, it shows steps on the same screen where calories are displayed. Edge devices don't track steps, and on others, Activity tracking must be on.
Change screens with up/down buttons or swipes to see the different screens
Timothy Tang
2 oktober 2018 | Versie 2.64
Sorry, the "GPS" option is not displayed in "Settings".
Reactie van ontwikkelaar
2 oktober 2018, jim_m_58
That's not available in any CIQ device app. The way it works, is it uses the setting from the last native app you used. It's nothing with Hike2 itself. Please use "contact developer" (on the right) for questions like this instead of leaving reviews.
Chander Mishra
21 september 2018 | Versie 2.63
Good app as per reviews however not able to locate option to switch on GPS. I have tried means available but not able to do it.
Reactie van ontwikkelaar
21 september 2018, jim_m_58
Hike2 turns on GPS itself. If you are seeing a delay getting GPS, start something like the native run app, and wait for it to "go green". It shows better progress in getting a fix than is possible in CIQ.
Rolland
19 september 2018 | Versie 2.63
I've installed app on VA3 and it works perfectly. Big thanks to the developer. It has everything i expected and even more
Allamerican2529
9 september 2018 | Versie 2.63
Great hiking app, best one imo available. Only complaint is when I sync the watch to the phone app, the hiking activity doesn't show up anywhere in the phone app so you won't have a history of your previous hikes.
Reactie van ontwikkelaar
9 september 2018, jim_m_58
It should show up under "all activities" on your phone (Activities,All Activities) Hiking doesn't have it's own category like Walking, Running, Cycling do. That's a decision by Garmin.
Beniamin
31 augustus 2018 | Versie 2.62
Awesome app
Rnny
29 juli 2018 | Versie 2.62
why do I not receive notifications, missed calls or what's apps while recording. With the original Garmin Apps it works perfectly, but yours is not showing anything...
Reactie van ontwikkelaar
29 juli 2018, jim_m_58
Please use "Contact Developer" and supply info such as the device you have and it's firmware version. There also is an about in the settings for most devices for what type of notifications you want to see while in an activity, so check on that. Are you sure your phone is connected at the time (see what the phone says)
RobbieYo
27 juli 2018 | Versie 2.62
I wanted an app for hiking that showed plenty of details about the hike, was not complicated to use and provided reliable data. Well Hike2 does all of that and has the added benefit of being free! Pretty surprising for an app of this quality. It’s been working great on my VA3. I was also pleasantly surprised by the quality and speed of the support. I asked them several different questions and they were all answered within a few hours. I highly recommend this app and this developer.
RoNNoS
25 juli 2018 | Versie 2.62
Gute Wander App. Würde eine deutsche Übersetzung gut finden. Autopause gibt es wohl keine?
Luciana Vieira
20 mei 2018 | Versie 2.53
I used it for a 13-day walk and it worked perfectly fine! Everything you need!
edmasamo
4 mei 2018 | Versie 2.53
I like the latest review, however - I noticed that the floors climbed vibration comes up quite a lot! It didn't used to do it as much, is there any way to adjust/customize how often it vibrates? or to turn off the vibration for floors climbed? It feels like a bit too much.
Thanks
Reactie van ontwikkelaar
5 mei 2018, jim_m_58
That happens when the firmware thinks there was a floor up or down. While in Hike2, there is a general setting for vibrations/tones, there's not one that specific to each type of message like this. In settings, you can turn off "Dot for Floors" and this will also turn off the message for floors (and their location on the chart), but the count will still show on the floor/intense minutes screen.
Peter Johnson
27 april 2018 | Versie 2.53
Everything you need for serious walking without gimmicks or flashy graphics. Works well on FR645.
Helmut
24 april 2018 | Versie 2.53
Tolle App verwende sie sehr häufig Höhenmessung sehr gut und auch die anderen Funktionen sehr gut nur wieder so
Gus
28 maart 2018 | Versie 2.52
Отличное приложение! Сегодня протестировал. Впечатления самые лучшие. Спасибо за труд! Удачи Вам!
HGK 柯浩天
26 maart 2018 | Versie 2.52
Lots of useful info, good presentation, many customization options.
donP73
23 februari 2018 | Versie 2.50
Good revision in the last version!
I would ask: there's a way to enable/disable GLONASS mode?
Reactie van ontwikkelaar
23 februari 2018, jim_m_58
That's based on what was last used in native apps (like running), and isn't something I can do from Connect IQ.
michaelyu2011
28 januari 2018 | Versie 2.14
Great app. I have used it for more than one year on my va hr. Recently, I noticed that the lap function is not available. Not sure, if you removed it or it would not work on the device.
Reactie van ontwikkelaar
28 januari 2018, jim_m_58
There is auto lap function that is off by default, and the lap key itself is used to mark waypoints.
donP73
28 januari 2018 | Versie 2.14
Hike2 is my favourite app.
It ha s only one defect, imho:
It would be a good thing if - when we pause - we can have a
summary scrolling screen and below (pushing "down" button) the three options:
1. Resume
2. Save
3. Resume Later
like other native-preinstalled apps by Garmin.
That would make complete Hike2 and allow to save more battery during longer breaks (like in the lunch break)
Reactie van ontwikkelaar
28 januari 2018, jim_m_58
When you pause (the resume/dave/discard screen), you can press the back button, and see all the screens you can see when you aren't paused (with an indicator you are paused). Press start again brings back the menu, where you can resume.
"resume later" isn't possible with Connect IQ applications.
CMOS4
22 januari 2018 | Versie 2.14
I am not sure yet whether this app will accomplish what I want, which is to have a map of my route from start to finish that will allow me to backtrack along a path until I get back to my starting position. The reason I am unsure still is that following a path back to a way point is not super easy without a compass superimposed on the path showing me the direction to go.
Also I am not sure what you mean by the field labeled "sun up". That sounds like sunrise, but it seems to me what you really mean is that once the sun is up, that is how much day light I have until sunset, since any other interpretation makes no sense because where I live sunrise is 7:38 am and sunset is 5:38, and the other fields state "sunrise in 5:25, sun up: 9:59"
Andi
24 december 2017 | Versie 2.11.2
Hello, I love this app, but lately it didn't record a 3h GPS track despite having fixed GPS in 2 occasions. It is a bit confusing as well to know if you resumed correctly after you paused, pushing the button on va3 should resume tracking but it didn't, had to chose resume on screen. I had some boot loops with my watch, so the bug with GPS track not being recorded may not be linked to the application however using walk native app did record correctly the end of my hike. A bit concerned about app reliability now, but will test again.
Reactie van ontwikkelaar
24 december 2017, jim_m_58
There is a bug in th 2.70 Firmware on the va3 that impacts all CIQ apps that use GPS. We just have to wait for a firmware update. Here's a thread about it:
https://forums.garmin.com/forum/into-sports/health-fitness/vivoactive-3-aa/1284352-gps-with-iq-app-and-v2-70
Lisa
22 december 2017 | Versie 2.11.2
Downloaded. Can't see how i change user setting...? I have a fenix 5s. Any advice?
Reactie van ontwikkelaar
22 december 2017, jim_m_58
There are a couple things you change on the watch itself -like white or black background. On the f5x, long press the up button to get a menu for those.
The majority of settings you change with your phone or Garmin Express. Here's a simple guide to using app settings: https://forums.garmin.com/forum/developers/connect-iq/connect-iq-showcase/115055-how-to-app-settings
Victor Berchet
4 december 2017 | Versie 2.11.2
Works great on my vivoactive3 with a lot of useful info.
However it consumes a lot of battery. What I usually see:
- ~1% per h in watch mode (with activity tracking on),
- ~10% per h in the native run mode (GPS),
- ~20% per h with this app
(Is it possible that some screen consumes more than others ? asking because I spent a lot of time using the compass or the track)
Would love to have a ascension rate (m/min).
Thanks for this good app.
Reactie van ontwikkelaar
6 december 2017, jim_m_58
The compass, the screens with graphs, and the "chart" screen do more when updatings. You may want to go back to something like the main screen when you're not looking at one of those screens.
Device App 
