App Icon

Combo Running Power

Beschrijving

Get 4 data fields in 1. This app shows current power, lap power, last lap power and average power. It must be displayed as a single data field on its own data screen.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garmin devices to calculate and show your running power in real time — as well as after your run.</p>

Nieuwe functies

Changes made from version 1.30 to 1.40:</p><p>- Fix bug where wind power was always disabled</p><p></p><p>Changes made from version 1.20 to 1.30:</p><p>- Support for the fenix5/5s/5x Plus series</p><p></p><p>Changes made from version 1.10 to 1.20:</p><p>- Support for the Forerunner 935 APAC and fenix5/5s/5x APAC</p><p></p><p>Changes made from version 1.00 to 1.10:</p><p>- Support for the Forerunner 645 and Forerunner 645 Music</p>

Aanvullende informatie

Machtigingen

Deze app vereist toegang tot:

  • Gegevens via ANT draadloze communicatie verzenden naar/ontvangen van sensors van externe leveranciers
  • Voer op de achtergrond uit indien niet actief (batterijduur wordt mogelijk beïnvloed)
  • Verzend/ontvang informatie naar/van internet
  • Extra informatie vastleggen in activiteitenbestanden
  • GPS-locatie
  • Hartslag-, barometer-, temperatuur- en hoogtegeschiedenis
  • Uw Garmin Connect™ fitnessprofiel
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
Gemiddelde beoordeling: (22 beoordelingen)

Edward Wong
4 maart 2019 | Versie 1.40

The fields don't show any response while running. I am using Fenix 5 and RD Pod

Vernersson
2 maart 2019 | Versie 1.40

Nice data field, when it is working. A lot of data gaps and sometimes it's not registering any data at all. Using it on my Fenix 5

christian de marco zompit
7 februari 2019 | Versie 1.40

nice app

Vitaly
1 december 2018 | Versie 1.30

Same thing: no wind correction on my FR935. Wind Correction is enabled (1), but Garmin Connect always showing disabled (0). Provided instructions in faq don't help. The weather widget on the watch is able to show current weather, but no luck with wind correction.

Krzysiek
21 november 2018 | Versie 1.30

Good app! Just one question - need some guidance on setting the zones. Can anbody help? ☺

Biwi
30 oktober 2018 | Versie 1.30

Funktioniert nicht für Intervall-Trainings. Die Average Running Power ist laut der App in der Pause fast gleich hoch, wie während der Belastung... Hier besteht noch massives Verbesserungspotential!

TMK17
11 september 2018 | Versie 1.30

Same as a few other reviewers. Wind Correction set to enabled (1), but Garmin Connect always showing disabled (0). Reinstalling, or resetting in GCM or Express doesn't correct this. I'm using the data field on my FR935.

mr3ska
20 juni 2018 | Versie 1.20

I am using it with fenix5x and HRM Run2 and it works perfectly (link to graph below). Will it be available for the Plus devices too? https://ibb.co/m7yfqJ

Aaron Shakocius
19 juni 2018 | Versie 1.20

Has never worked for me (Fenix 5 Saph). Even with it connected to my phone for over a half hour before, as well as during my runs.

Kevin Sherman
8 mei 2018 | Versie 1.20

Need some support and have not been able to get any from traditional Garmin [initially they responded and said Garmin Labs was not affiliated with Garmin!]. The app records data when used in conjunction with HRM-RUN, there is data in the graph post run, but it only reports average wattage perhaps 1 out of 5 times. Have deleted, reinstalled, etc. with no help. Just upgraded from fenix 5s to fenix 5, reinstalled and it's doing the same thing. Can somebody please provide a support contact that actually knows the app? Also, the most previous post regarding wind settings: I was seeing the same thing when it would report. It showed as set to 0 in Connect data despite the settings being 1 and I could not change despite resetting, power cycles etc.

Kevin O'Neill
18 maart 2018 | Versie 1.20

I am using this on 645M (FW 2.40).Data field and power info work but not wind correction.It is enabled in settings but on data info in garmin connect it constantly says "0" Disabled.I have made sure the device was connected before a run for 20 mins to download data.It happens either on mobile or desktop.Tried delete,powercycle,reinstall. Any clues?

oximoros
20 februari 2018 | Versie 1.10

using a 735 and a stryd, and never getting any data from this app. and yes, the stryd is paired with the watch and a can see power in the running field, but not in this combo app. useless.

Pavel Misař
19 februari 2018 | Versie 1.10

It is very good feature, but is it possible to do in run to hill about 1000W?

Rocky
2 februari 2018 | Versie 1.10

Afyer a run, power is visible in Garmin connect app for android only for a while in the text row with other statistic - then it dissapears and remains only in graph screen. Why is this happening? :( Thank you for your answer. I have Fenix 5X.

Sergio
2 februari 2018 | Versie 1.10

It run perfectly in my fenix 5x, and the data is perfetly compatible with trainingpeaks.It would be perfect to see the power like a HR zone chart to see my power in my training Great Job!!!!!!!!

Sergio
2 februari 2018 | Versie 1.10

It run perfectly in my fenix 5x, and the data is perfetly compatible with trainingpeaks.It would be perfect to see the power like a HR zone chart to see my power in my training Great Job!!!!!!!!

Oliver Höwer
28 januari 2018 | Versie 1.10

Doesn't work with my Forerunner 935 and the TRI HRM strap.? I can install it but it isn't listed under my activities. So I cannot activate it ?

Miloš Bosnovič
18 januari 2018 | Versie 1.10

I give 3 * because wind detection doesn't work properly. In my last activities this data field doesn't count with wind but I mostly ran against the wind...

Sergio
14 december 2017 | Versie 1.00

Run well in my fenix 5x, but I can't see the data in training peaks to know de Normalized Power or another power statistics. Well done!!!!! I give you 5 starts when Training peaks display the data.

Nog geen statistieken beschikbaar.