App Icon

Running Power

Beschrijving

This app displays your current running power. If you are new to training with running power, try this one first.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garmin devices to calculate and show your running power in real time — as well as after your run.</p>

Nieuwe functies

Changes made from version 1.50 to 1.60:</p><p>- Updated compatible devices</p><p></p><p>Changes made from version 1.40 to 1.50:</p><p>- Support for the Forerunner 945 and the MARQ collection</p><p></p><p>Changes made from version 1.30 to 1.40:</p><p>- Fix bug where wind power was always disabled</p><p></p><p>Changes made from version 1.20 to 1.30:</p><p>- Support for the fenix5/5s/5x Plus series</p>

Aanvullende informatie

Machtigingen

Deze app vereist toegang tot:

  • Gegevens via ANT draadloze communicatie verzenden naar/ontvangen van sensors van externe leveranciers
  • Voer op de achtergrond uit indien niet actief (batterijduur wordt mogelijk beïnvloed)
  • Verzend/ontvang informatie naar/van internet
  • Extra informatie vastleggen in activiteitenbestanden
  • GPS-locatie
  • Hartslag-, barometer-, temperatuur- en hoogtegeschiedenis
  • Uw Garmin Connect™ fitnessprofiel
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
Gemiddelde beoordeling: (56 beoordelingen)

Frank Groenewoud
19 mei 2019 | Versie 1.60

Not working as expected on the 945. Data on Garmin connect shows only some spikes

Edgar Montalvo Escamilla
15 mei 2019 | Versie 1.60

It's working, however when using training peaks, it does not show the power on the gauge.

javier1153
4 april 2019 | Versie 1.40

¿Como podría calcular las zonas de trabajo de potencia?

Keithshu
29 maart 2019 | Versie 1.40

I can't read the power data in Garmin Connect after ran with forerunner 935.is it required wearing running pod in order to able to read the data?

MaBoMaBo
24 maart 2019 | Versie 1.40

+30% overstated measurements vs Stryd. Stryd matches Garmin's vo2max...

Daniel Göthberg
22 maart 2019 | Versie 1.40

Have you any others that have cope with the problem that the running power (Garmin Lab) stopped working mid March for Garmin 935 watch. It have been working until recently, it just stopped and now I can´t see the power anymore when I am out running.

Edward Wong
13 maart 2019 | Versie 1.40

never show any data no matter in my Fenix 5 nor Garmin Connet App

Dejan Bogdanovic
3 maart 2019 | Versie 1.40

Today no avg and graphs at garmin connect? Fenix 5 and 935, both. During activity shows data field ok.

Piero Cosimo
27 februari 2019 | Versie 1.40

the power data as it is is unusable. it also varies too much to constant efforts in plan. you should be able to set the interval to 3" 5"

Benjamin
26 februari 2019 | Versie 1.40

Perfect Datafield :)

Hanspeter Berger
12 februari 2019 | Versie 1.40

it works accurate...cool :-)

christian de marco zompit
7 februari 2019 | Versie 1.40

seems to work good!!

Andrew Lind
1 februari 2019 | Versie 1.40

Me too, MarekU!!! No Running power on garmin connect. I can see the power when I view the activity on the runalyse website though so it is being saved away

Carlos Simon
1 februari 2019 | Versie 1.40

Me too, MarekU!!!

MarekU
31 januari 2019 | Versie 1.40

Don't see any Power graph in Garmin Connect after synchronizing my running data (Garmin 935). I installed the application and can configure zones & all other parameters. It shows the current Power meter data while running. Anyone having the same problem with version 1.40.

Sergio
11 januari 2019 | Versie 1.40

I don't know why but since the last update my power data low alot. For example, on December 2018, runing at 5:38 give me 310 Avg Running Power, on January 2019 running at 5:29 give me 77 Avg Running Power!!!!!!!!!!!!!!!

Fran
10 januari 2019 | Versie 1.40

Good application, but it's the same as Juan Maria Jimenez that in the intervals doesn t calculate the average of the Watts.

Pablo de las Heras
13 december 2018 | Versie 1.30

As Juan Maria Jiménez said on December 4th, I have de same problem with my Fenix 5. If you need it, I can send you pictures of this problem. I imagine this is a software mistake but if only it was solved as soon as possible. If it wasn't for this problem, I would give 6 stars without doubt.

Juan Maria Jimenez
4 december 2018 | Versie 1.30

Good morning, There is a problem with the Garmin Labs applications with the watts in Garmin and it is the following. when I do series, with LAPS, when I look at the summary, it does not take out the average watts of the LAP ... In the graph I'm going to 450 watts, but then the average of the series comes out at 380 watts. It would be fine, that this ruling will be solved. Understand the problem. If you leave me an email I would send the images.

Ikkal
4 december 2018 | Versie 1.30

Not working on fenix 5x plus. Disappointing..

Sotiris Diamantopoulos
2 december 2018 | Versie 1.30

Please provide an option to smooth values. In its current implementation, running power is only useful as a post-exercise tool. Trying to use it in real time, as I run, power values are fluctuating too much to be of any use. Essentially, I am trying to smooth the values myself, averaging the last 3 seconds, which is the last thing a runner needs to do while running or racing. An option to smooth values with a variable smoothing window (e.g. 3-10s) would render this datafield much more useful.

Ralph
30 november 2018 | Versie 1.30

I really do like to have the running with Power option on Garmin. Unfortunately very little is published and google only finds over and over the same reviews .... I read a lot about running on power on: https://thesecretofrunning.com/wp-content/uploads/2018/01/31-Second-test-of-Garmin.pdf and their theory is very solid. They can exactly calculate the power numbers and confirm stryd values. Your numbers seem to follow a different approach and the watts are approx 30% higher. I would appreciate if you can add a config option to select which power model to follow. This would allow to follow training plans designed for the power ranges displayed by stryd. Thanks for a brief answer and considering for an update release ! Would be nice to have for the spring training season ;)

Krzysiek
21 november 2018 | Versie 1.30

Good app! Just one question - need some guidance on setting the zones. Can anbody help? ☺

RafaelMonge
5 november 2018 | Versie 1.30

Hello good day I write to you in relation to the "app running power" I would like to train with the power parameter while I run, but currently it is not possible to set up training with power. I give an example done with trainingpeaks: Workout Details Warm up 2.00 km @ 277-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Active 3.00 km @ 415-454 W Zone 4 - Threshold-Zone 5 - High Intensity Recovery 1.50 km @ 296-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Cool Down 1.00 km @ 198-237 W Zone 1 - Recovery / Walking Is there any way for fenix 5 to warn me that I am within the correct range of power at each step?

Mars
27 oktober 2018 | Versie 1.30

I have a Fenix 5 plus and it works well. From my runs with both the RD Pod and Stryd the readings give different numbers, but the overall curves follow similar patterns. I don't understand why the RD Pod can't give pacing information like Stryd. My suggestion would be for this app to work with any power sensor. I'd use the power gauge data field instead of Stryd's Race Power which I really don't like.

Nog geen statistieken beschikbaar.