App Icon

What's My FTP? - Xert

Beskrivelse

REGISTER FOR YOUR XERT 30 DAY FREE TRIAL!</p><p></p><p>www.xertonline.com</p><p></p><p>This convenient simple datafield determines your FTP *on-the-fly*, continually updating and increasing the value the harder you ride. Using a sophisticated Xert™-based algorithm, the app uses patterns in power data coming from your power meter and looks at how you fatigue to provide an estimate of your FTP. Use it during regular riding or use it during FTP tests, if you prefer. You don't have to worry about pacing or interruptions. Just ride as hard as you can, right to your limit, and you'll then have your FTP.</p>

Nyheter

*What's My FTP?* Wins Best Edge App of the Year at the Garmin ConnectIQ Summit!!</p><p></p><p>Blog: http://baronbiosys.com/real-time-ftp-determination/</p><p>https://www.dcrainmaker.com/2017/07/xert-rolls-out-free-real-time-ftp-app-on-garmin-devices.html</p><p>

Mer informasjon

Tillatelser

Dette programmet krever tilgang til:

  • Garmin Connect™-treningsprofilen din
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 130 Edge® 130
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
Gjennomsnittlig vurdering: (58 vurderinger)

R H S
16. august 2019 | Versjon 3.4

Rob S: Seems o give accurate values based on all the different types of tests I've done. The best garmin app i've used by far and one i'd be happy to pay for as a one off. But not £100/yr subscription. Tried the premium service, very good but just cant justfiy the cost per use.

Felix Herwegh
13. august 2019 | Versjon 3.4

Thanks for another year. Very much appreciated! Would like to sign up for XERT, but I'm to amateur and time pressed to make good use of it atm. That time might come though...

Felix Herwegh
10. august 2019 | Versjon 3.3

Has been a very nice app for the (pretty good estimated!) quick 'n dirty on-the-fly-FTP on my various head units for quite some time now. But this is not the first time, this app unexpectedly quits functioning. Last time they eventually provided an update. Although, the one hour shedule is new and very much seems to be on purpose. Since I have not updated for some time now (even think I was still on the previous version when it started) it feels like it must have been sleeping in the code to be finally activated recently. Armando, if this app from now on merely is supposed to be a teaser for your paid XERT services, why not openly say so? And explain, how to get that code for this app. Appp description and your own website still say pretty different...

Miloš Matůš
9. august 2019 | Versjon 3.3

It was a great data field, but recently shows error: that it is expired and needs a code...

Lorenz
8. august 2019 | Versjon 3.3

My xert IQ app doesn't work anymore. What means "Xert code required"???

Rostislav Gerasimov
8. august 2019 | Versjon 3.3

It's very inconvenient when you try to ride your best and the app instead of showing FTP estimation shows message "enter xert code"

Peder Guldbrandt
7. august 2019 | Versjon 3.3

I've been using this app for about a Year without problems, but now it also gives me the failere "enter xert code" eact time after around 1 hour of riding.

Annika Bengtsson
4. august 2019 | Versjon 3.3

After some days it stopped working, enter xert code. Lacks information about that code.

chcoste
2. mai 2019 | Versjon 3.2

Is this Also functional for running ?

Utviklerens svar
2. mai 2019, Xert-BaronBiosystems

It should be but may slightly underestimate your threshold power. Try it out and share your experience.

Crypto Synaptic
21. november 2018 | Versjon 3.2

I like Xert and this app just works fine on my Edge 520 plus.

zssachen
9. oktober 2018 | Versjon 3.2

This won't work on a Fenix 5X Plus? :-/

Craig Enders
3. september 2018 | Versjon 3.2

App works great. Its fun to watch the your results improve with each ride. With the current update the code error was resolved. I cannot however change the reset to Off for each lap. When I set to off from my PC it does not hold. I cannot edit this setting from the device (Edge 1030) or my iPhone.

auxiglia
30. august 2018 | Versjon 3.2

the app is listed on GE and GCM but does show on my fenix 5. what do i miss?

Utviklerens svar
30. august 2018, Xert-BaronBiosystems

Not sure. It works like any other datafield. Make sure you following the correct app install and configuration sequences.

Manuel
28. august 2018 | Versjon 3.2

Great app. Sometimes it will return a message about expired licence (Yes I have the latest version) but most times it works fine.

Brian Faure
22. august 2018 | Versjon 3.2

I use is all the time...but after about a month of use is says "Time expired enter Xert code" or something like that. I thought this was a free app?

Sele
9. august 2018 | Versjon 3.2

Generally a good app but can not update it to latest version. Always says problem with deinstalling. WHat shpuld i do?

Andy Porritt
4. juli 2018 | Versjon 3.1-upd2

Just given 3 stars as when it was first installed it was reasonably accurate although easy to spoof and get an extra 10-15 W by putting in a surge in the last 2 mins of an 20 min FTP test. Recently it's stuck on 200 W whether it's getting power from PT hub, Quarq crank or Zwatt crank arm.

Utviklerens svar
5. juli 2018, Xert-BaronBiosystems

For best results, the first time you use the app, perform a Peak Power effort (i.e. obtain your highest power possible) while you are fresh and before you attempt an exhausting effort. Look for an opportunity to put out your highest wattage possible first and from then on you should be good to go. If previous power data errors are causing it to now show invalid values, simply reset the app using the reset function in the app's settings.

Truls Haugen
26. juni 2018 | Versjon 3.1-upd2

i am struggling to get it to show up on my fenix 3 HR. I have tried to install it several times with resets of the watch, but it does not show up on the programs. Any help would be appreciated.

Kx Jx
12. juni 2018 | Versjon 3.1-upd2

Have tested this app on my Edge 810 over three solid rides now (two outdoor and one trainer ride using Zwift). It's given a pretty spot on reading of my FTP compared to my past test results and the effort I put out for those rides. Would definitely recommend it. Beats doing an old school 20-minute test! tempocyclist.com/2018/06/12/garmin-iq-whats-my-ftp It would be good if the final figures were stored somewhere for future reference. Maybe they are and I just haven't figured that out yet?

Brad Silverberg
12. mai 2018 | Versjon 3.1

I am using with a Garmin 520. What's My FTP displays w/kg in the data field. How do I get it to display as watts instead?

Utviklerens svar
13. mai 2018, Xert-BaronBiosystems

Check the app settings using GCM or GE.

Wim Nederveen
8. mai 2018 | Versjon 3.1

Worked perfectly initially on my Edge 1000. However now the FTP is indicated under my average power on a 2 hour ride. I think this was after the app update. I have the lap reset switched off.

Streetviper
6. april 2018 | Versjon 3.06

Worked great until I did a reset on my Garmin EDGE 520. Reinstalled the app and now it’s stuck at an FTP of 300. I tried reinstalling it but that didn’t help. Now I read in another comment you need to turn off auto lap. It would be really helpful if the Developer could provide comprehensive instructions or a short walkthrough as how to install and what to watch out for. Am I missing something else maybe? Any setting I have to pay attention to? Another thing is I set the app to W/KG but that doesn’t change anything in the display and I dobt seem to be able to turn off “reset on lap”.

Utviklerens svar
27. april 2018, Xert-BaronBiosystems

We've just pushed out a new update that has a setting to reset the app back to its default values. Check it out.

Frank Zweers
16. februar 2018 | Versjon 1.5-upd2

Works perfectly on my Fenix3, but on Edge820 the FTP is far too low. On the same ride I have 220 on Fenix and 150 on Edge.

Utviklerens svar
17. februar 2018, Xert-BaronBiosystems

Check your device's lap and the app's "Reset on Lap" settings.

Reuben
17. januar 2018 | Versjon 1.5-upd

Glad the developer is active responding to feedback! The app is very cool. I didn't realize that the FTP resets every lap button press until I saw their notice about that; I had thought that the app was just experience errors or I needed to update it or something. Definitely going to toggle that off for my riding since I have autolap enabled on my Edge (I don't need it resetting every couple of minutes - 5 miles). I think it should be more obvious that the app will reset its FTP estimate every time there's a new lap.

My Name
11. januar 2018 | Versjon 1.5-upd

It’s great but it doesn’t work with the latest edge 820 firmware update. are you going to fix it?

Utviklerens svar
11. januar 2018, Xert-BaronBiosystems

Nothing has changed in the Garmin ConnectIQ platform that requires any changes to the app software. Try using Garmin Express and/or Garmin Connect Mobile to re-install the app. Perhaps there was an error that occurred during the firmware update process.

Beklager! Ingen tilgjengelig statistikk ennå.