App Icon

Combo Running Power

Beskrivelse

Get 4 data fields in 1. This app shows current power, lap power, last lap power and average power. It must be displayed as a single data field on its own data screen.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garmin devices to calculate and show your running power in real time — as well as after your run.</p>

Nyheter

Changes made from version 1.50 to 1.60:</p><p>- Updated compatible devices</p><p></p><p>Changes made from version 1.40 to 1.50:</p><p>- Support for the Forerunner 945 and the MARQ collection</p><p></p><p>Changes made from version 1.30 to 1.40:</p><p>- Fix bug where wind power was always disabled</p><p></p><p>Changes made from version 1.20 to 1.30:</p><p>- Support for the fenix5/5s/5x Plus series</p>

Mer informasjon

Tillatelser

Dette programmet krever tilgang til:

  • Sende/motta data via ANT til/fra tredjepartssensorer
  • Kjør i bakgrunnen når den ikke er aktiv (kan påvirke batteritiden)
  • Send/motta informasjon til/fra Internett
  • Register tilleggsinformasjon i aktivitetsfilene
  • GPS-posisjon
  • Historie for puls, barometer, temperatur og høyde
  • Garmin Connect™-treningsprofilen din
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
Gjennomsnittlig vurdering: (24 vurderinger)

Andrew G
7. juni 2019 | Versjon 1.60

Ok for real time power, but the lap power and last lap power only works on predefined auto lap distances. If you have a workout where you are doing intervals, when it laps for each interval, the lap and last lap power remain unchanged.

Anis
13. april 2019 | Versjon 1.40

Impossible de trouver dans la fenix5. Je ne trouve aucun menu

Edward Wong
4. mars 2019 | Versjon 1.40

The fields don't show any response while running. I am using Fenix 5 and RD Pod

Vernersson
2. mars 2019 | Versjon 1.40

Nice data field, when it is working. A lot of data gaps and sometimes it's not registering any data at all. Using it on my Fenix 5

christian de marco zompit
7. februar 2019 | Versjon 1.40

nice app

Vitaly
1. desember 2018 | Versjon 1.30

Same thing: no wind correction on my FR935. Wind Correction is enabled (1), but Garmin Connect always showing disabled (0). Provided instructions in faq don't help. The weather widget on the watch is able to show current weather, but no luck with wind correction.

Krzysiek
21. november 2018 | Versjon 1.30

Good app! Just one question - need some guidance on setting the zones. Can anbody help? ☺

Biwi
30. oktober 2018 | Versjon 1.30

Funktioniert nicht für Intervall-Trainings. Die Average Running Power ist laut der App in der Pause fast gleich hoch, wie während der Belastung... Hier besteht noch massives Verbesserungspotential!

Todd Krupa
11. september 2018 | Versjon 1.30

Same as a few other reviewers. Wind Correction set to enabled (1), but Garmin Connect always showing disabled (0). Reinstalling, or resetting in GCM or Express doesn't correct this. I'm using the data field on my FR935.

mr3ska
20. juni 2018 | Versjon 1.20

I am using it with fenix5x and HRM Run2 and it works perfectly (link to graph below). Will it be available for the Plus devices too? https://ibb.co/m7yfqJ

Aaron Shakocius
19. juni 2018 | Versjon 1.20

Has never worked for me (Fenix 5 Saph). Even with it connected to my phone for over a half hour before, as well as during my runs.

Kevin Sherman
8. mai 2018 | Versjon 1.20

Need some support and have not been able to get any from traditional Garmin [initially they responded and said Garmin Labs was not affiliated with Garmin!]. The app records data when used in conjunction with HRM-RUN, there is data in the graph post run, but it only reports average wattage perhaps 1 out of 5 times. Have deleted, reinstalled, etc. with no help. Just upgraded from fenix 5s to fenix 5, reinstalled and it's doing the same thing. Can somebody please provide a support contact that actually knows the app? Also, the most previous post regarding wind settings: I was seeing the same thing when it would report. It showed as set to 0 in Connect data despite the settings being 1 and I could not change despite resetting, power cycles etc.

Kevin O'Neill
18. mars 2018 | Versjon 1.20

I am using this on 645M (FW 2.40).Data field and power info work but not wind correction.It is enabled in settings but on data info in garmin connect it constantly says "0" Disabled.I have made sure the device was connected before a run for 20 mins to download data.It happens either on mobile or desktop.Tried delete,powercycle,reinstall. Any clues?

oximoros
20. februar 2018 | Versjon 1.10

using a 735 and a stryd, and never getting any data from this app. and yes, the stryd is paired with the watch and a can see power in the running field, but not in this combo app. useless.

Pavel Misař
19. februar 2018 | Versjon 1.10

It is very good feature, but is it possible to do in run to hill about 1000W?

Rocky
2. februar 2018 | Versjon 1.10

Afyer a run, power is visible in Garmin connect app for android only for a while in the text row with other statistic - then it dissapears and remains only in graph screen. Why is this happening? :( Thank you for your answer. I have Fenix 5X.

Sergio
2. februar 2018 | Versjon 1.10

It run perfectly in my fenix 5x, and the data is perfetly compatible with trainingpeaks.It would be perfect to see the power like a HR zone chart to see my power in my training Great Job!!!!!!!!

Sergio
2. februar 2018 | Versjon 1.10

It run perfectly in my fenix 5x, and the data is perfetly compatible with trainingpeaks.It would be perfect to see the power like a HR zone chart to see my power in my training Great Job!!!!!!!!

Oliver Höwer
28. januar 2018 | Versjon 1.10

Doesn't work with my Forerunner 935 and the TRI HRM strap.? I can install it but it isn't listed under my activities. So I cannot activate it ?

Miloš Bosnovič
18. januar 2018 | Versjon 1.10

I give 3 * because wind detection doesn't work properly. In my last activities this data field doesn't count with wind but I mostly ran against the wind...

Sergio
14. desember 2017 | Versjon 1.00

Run well in my fenix 5x, but I can't see the data in training peaks to know de Normalized Power or another power statistics. Well done!!!!! I give you 5 starts when Training peaks display the data.

Beklager! Ingen tilgjengelig statistikk ennå.