7. juli 2020 | Versjon 0.23
Approach S62 shows "None Paired" ? S62 is on the support list.
8. juli 2020, jim_m_58
Pairing refers to a paired Tempe Sensor. Do you have one?
The internal temperature is not available on the s62, so a tempe is the only option.
24. juni 2020 | Versjon 0.23
fenix3 HR - I only get temperature from the Tempe-sensor, no Internal reading showing on the screen. (Temps v. 0.23)
26. juni 2020, jim_m_58
The f3 doesn't support CIQ reading the internal temperature. Internal temp is only available on newer devices.
11. juni 2020 | Versjon 0.22
Internal temperature is not available on Forerunner 245. Can you implement an option to disable the internal temperature? Tempe works fine.
11. juni 2020, jim_m_58
I'll add it to my list of things to look into
27. mai 2020 | Versjon 0.22
I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.
27. mai 2020, jim_m_58
You must be thinking of a different widget as this one never vibrates. Could it be the FW is doing a vibrate when it connects to the tempe?
20. mai 2020 | Versjon 0.22
Ok, very very Ok.
15. mai 2020 | Versjon 0.22
Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.
11. mai 2020 | Versjon 0.22
I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.
12. mai 2020, jim_m_58
It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.
2. mai 2020 | Versjon 0.22
It doesnt work in Forerunner 235, i dont know why, please help me!!
3. mai 2020, jim_m_58
The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.
9. april 2020 | Versjon 0.22
No salecen grados centigrados
9. april 2020, jim_m_58
C or F is based on a standard setting on your watch.
Under Settings/System/Units, set Temperatature Units to C or F.
31. mars 2020 | Versjon 0.22
Installed on my Vivoactive HR and doesn't work.
31. mars 2020, jim_m_58
Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.
17. januar 2020 | Versjon 0.21.7
does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.
17. januar 2020, jim_m_58
The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.
21. desember 2019 | Versjon 0.21.6
This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!
22. desember 2019, jim_m_58
In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor.
As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.
31. juli 2019 | Versjon 0.20.1
17. juli 2019 | Versjon 0.20.1
So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) :
Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause.
Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.
9. mai 2019 | Versjon 0.20.1
Очень полезное приложение для тех, у кого есть garmin tempe.
Работает отлично на garmin fenix 5X plus.
2. januar 2019 | Versjon 0.18
Great widget Jim! Keep up the good work
12. desember 2018 | Versjon 0.18
Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?
13. desember 2018, jim_m_58
Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.
4. desember 2018 | Versjon 0.18
Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended
4. desember 2018, jim_m_58
Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.
28. november 2018 | Versjon 0.18
Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!
30. oktober 2018 | Versjon 0.18
Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???
31. oktober 2018, jim_m_58
That's the version number of the app.
25. oktober 2018 | Versjon 0.18
Excellent. Exactly what i was looking for. Totally 5 stars!
Enrique Del paso
30. juni 2018 | Versjon 0.17-upd3
On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...
30. juni 2018, jim_m_58
The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.
29. juni 2018 | Versjon 0.17-upd3
Great and simple
25. juni 2018 | Versjon 0.17-upd3
Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.
1. mai 2018 | Versjon 0.17-upd1
Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max